Mesh Wi-Fi can help if the connection in your workspace is weak, but it won’t increase the upload speed of your internet package. So first, test the connection using Ethernet at your main router and at your workspace. If the upload is already slow at the router, mesh probably isn’t the only thing you need to address. If you can run an Ethernet cable between the points, you can avoid a wireless backhaul. Without a cable, the choice between wireless mesh and powerline depends on what you can test in the intended location.
Who should consider mesh Wi-Fi for portfolio uploads?
Creative professional working beyond the hallway
You upload from a workspace where the connection to your main router is weak. The location and connection of an additional Wi-Fi point are therefore important. The Consumers’ Association (Consumentenbond) highlights that the placement of Wi-Fi points affects the signal between them.
Creative professional with slow uploads
You regularly send large portfolio or project files and want to know whether your internet upload speed is the limiting factor. The Consumers’ Association points out that upload speed affects how quickly files can be sent and synced.
Homeowner without a cable route
You can’t run an Ethernet cable to your workspace, so you’re comparing a wireless connection between mesh points with a test using your home’s electrical sockets. The actual connection depends on the route you choose and the conditions in your home.
What should you look for when choosing mesh Wi-Fi?
Mesh with Ethernet backhaul
Choose this if: you can run a network cable between the Wi-Fi points and don’t want to rely on a wireless connection through the hallway.
Bear in mind: you’ll need to consider the cable route, available ports and the right connection for your network mode. TP-Link also describes Ethernet backhaul for Deco in access point mode.
Wireless mesh
Choose this if: running a cable isn’t practical and you can find a spot where the second point still receives a usable signal from the first.
Bear in mind: placing a point beyond the hallway won’t automatically fix a weak connection to the first point. Tweakers notes that devices connected to a wireless satellite depend on the quality of the backhaul.
Mesh with powerline
Choose this if: you can’t run a network cable and want to try a connection through the electrical sockets in your home.
Bear in mind: product specifications can’t predict how well powerline will work in your home. Also check which adapters are included with the set you choose.
Start with your current router or internet connection
Choose this if: the wired upload speed at your main router is already too slow, or moving your existing router to a better spot would solve the coverage problem.
Bear in mind: a new mesh system may not address a limitation with your internet connection. The Consumers’ Association also recommends investigating the connection itself if your internet is slow.
| What to consider |
What should you check? |
Who is this important to? |
| Coverage and placement |
Try possible locations on both sides of the hallway. Check whether the second point can still connect to the first from there. |
If my workspace is beyond the hallway, I want to know where an additional point can still maintain a usable connection. Around 36% of consumers give coverage and placement their highest priority. |
| Upload speed |
Compare an upload test using Ethernet at the main router with the same test in your workspace. |
If you send large files, you’ll want to know whether Wi-Fi or your internet connection is limiting the upload. Around 29% of consumers prioritise upload speed. |
| Connection between points |
Check that Ethernet backhaul is supported and how it connects, or test wireless backhaul or powerline in the locations you have in mind. |
Without a cable route, I want to know in advance whether a wireless connection or the electrical sockets can link the points. Around 21% of consumers give the connection between points their highest priority. |
| Management and additional costs |
Check which features are available in the mode you choose and whether any additional features require a subscription. |
If you want a system that works with your existing router without paying for features you don’t need, check the available options and terms. Around 14% of consumers prioritise set-up and costs. |
Common pitfalls with mesh Wi-Fi
-
Confusing a stated Wi-Fi speed with your portfolio upload speed
Wi-Fi specifications and the upload speed of your internet connection aren’t the same thing. A faster mesh system may not fix a slow upload at your main router.
First, test using Ethernet at your main router and compare the result with a test in your workspace.
Choosing the wrong location could mean you still need to find another spot, add another point or run a cable.
-
Assuming all Deco features remain available in access point mode
TP-Link describes Ethernet backhaul in this mode, but also notes that some advanced app features aren’t available.
Before setting up a system, check that the features you need are available in the operating mode you choose.
-
Assuming a CE reference for a model confirms the device you receive has been checked
The Dutch Authority for Digital Infrastructure says the CE marking must be on the equipment. A model name or product listing doesn’t show what is marked on the actual device you receive.
Check the marking on the device before using it.
Relevant mesh Wi-Fi brands
TP-Link
The Deco X50 is a dual-band Wi-Fi 6 model with optional Ethernet backhaul. These features apply to the models mentioned, not to every TP-Link product.
- According to the Dutch product specifications, each Deco X50 unit has three gigabit ports.
- In an independent test, Tweakers found that speeds dropped behind more distant wireless satellites. The test also noted that there was no dedicated backhaul radio.
ASUS
The ZenWiFi XT9 is a tri-band Wi-Fi 6 model to consider if you’re looking into a wireless connection between points.
- The Dutch model specifications list two 5GHz bands, router and access point modes, and a 2.5G WAN port.
- These specifications can’t predict how wireless backhaul will perform in your home; placement still matters.
devolo
Devolo describes the Magic 2 WiFi 6 next as combining powerline and mesh Wi-Fi to connect rooms without a network cable.
- According to the manufacturer, the starter kit contains two adapters and the Wi-Fi adapter has two gigabit ports.
- The stated Wi-Fi speed is a manufacturer specification, not a measurement of the powerline connection in your home.
NETGEAR
NETGEAR lists tri-band technology and an option for wired backhaul for the specific Orbi 870 set.
- For this set, the manufacturer describes both multiple radio bands and a wired connection between points.
- These features don’t prove that you need a more advanced system for a narrow hallway.
Joybuy products for mesh Wi-Fi and backhaul
These products are designed for mesh Wi-Fi set-ups, including options for those who can use wired backhaul and systems for wireless mesh. Check the exact model and make sure it suits the connection you can test at home.
No image available
TP-Link Deco BE68 2-pack
An option to consider if you can run a cable between mesh points. Check that the ports and connection method suit your network.
The product name indicates a set of 2.
View at Joybuy
No image available
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7
A good option to explore if you’re considering a tri-band wireless mesh set-up. Tri-band alone doesn’t guarantee upload speeds in your workspace.
The product name lists 2.4 GHz, 5 GHz and 6 GHz bands.
View at Joybuy
No image available
ASUS ZenWiFi BD4 dual-band Wi-Fi 7
A mesh option to consider if you want to use wired backhaul. Check the connections and suitable network set-up beforehand.
The product name lists dual-band 2.4 GHz and 5 GHz.
View at Joybuy
No image available
TP-Link Deco M4 3-pack, dual-band Wi-Fi 5
An option for wireless mesh across multiple locations. Test the connection between the points in the locations you can use at home.
The product name lists a set of 3, dual-band and Wi-Fi 5 (802.11ac).
View at Joybuy
No image available
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router
Worth considering if you’re looking at a Wi-Fi 7 mesh set-up. Check how many units are included in the version you choose and how they connect to each other.
The product name lists BE3600, dual-band and Wi-Fi 7.
View at Joybuy
Frequently asked questions about mesh Wi-Fi and portfolio uploads
Will mesh Wi-Fi automatically make your portfolio uploads faster?
No. Mesh won’t increase the upload speed of your internet connection. First, test using Ethernet at your main router. If the upload is already too slow there, an additional Wi-Fi point won’t fix the limitation.
Where should you place the second mesh point if you have a narrow hallway?
Don’t just choose a spot close to your workspace; check the connection back to the first point too. Test several locations. A cable between the points avoids the wireless connection between them.
Can you use a Deco set behind your existing router?
TP-Link describes an access point mode that can be used with Ethernet backhaul. The main router continues to assign IP addresses, among other things, and some advanced features of the Deco app aren’t available in this mode.
How do you choose between wireless mesh and powerline?
Choose wireless mesh if you can find a location where the second point still has a usable connection to the first. If that doesn’t work and you can’t run a network cable, you can try powerline using your home’s electrical sockets. Product specifications can’t predict the result.
Where can you check the CE marking on mesh equipment?
Before using the device, check that the required CE marking is on the device itself. The Dutch Authority for Digital Infrastructure stresses that a model name or online shop listing doesn’t confirm that the device you receive carries the marking.