Who might find mesh Wi-Fi useful for uploading photos?

People uploading photos together

You want to know whether uploading at the same time is mainly limited by your connection’s upload speed or by Wi-Fi coverage where people are sitting. ACM ConsuWijzer recommends testing your internet speed over a wired connection, while the Consumers’ Association advises against immediately opting for a more expensive package.

People uploading from rooms with poor coverage

You need Wi-Fi in several areas and want to weigh up whether to connect the mesh nodes wirelessly or with an Ethernet cable. TP-Link Support and ASUS Netherlands explain the options for wired and wireless backhaul.

The person managing the shared album

You want to give people access without automatically giving them access to your home network, and to keep album permissions separate. TP-Link Support explains how to set up local access on a guest network; Google Photos Help explains how shared album links affect access.

What should you look for when choosing mesh Wi-Fi?

Start with a wired test. Then decide whether you need no additional mesh, a wired connection between nodes or wireless mesh.

Start without extra mesh

Choose this if: a wired test by the router also shows disappointing upload speeds, or you want to investigate your existing Wi-Fi setup first.

Bear in mind: this won’t fix consistently weak Wi-Fi coverage in other rooms.

Mesh with Ethernet backhaul

Choose this if: Wi-Fi coverage is poor where people upload, and there’s a suitable route for an Ethernet cable between the nodes.

Bear in mind: the cable route, connections and configuration need to suit your home and router.

Wireless mesh

Choose this if: you need extra coverage, but running cables between the nodes isn’t practical.

Bear in mind: distance and obstacles affect the wireless connection between nodes, so test the positions you have in mind.

Concern What to look for when buying Who is this most relevant to?
Upload capacity when several people are online Test over a wired connection close to the router, then compare Wi-Fi in the places where people upload. When uploading together, I want to know first whether the internet connection is the bottleneck. Around 33% of consumers prioritise upload speed.
Wi-Fi coverage where people upload Map out the places where people will upload and possible positions for the nodes, then test the connection there. If people are adding photos from several rooms, I want to know whether the Wi-Fi is good enough in each one. Around 27% of consumers prioritise coverage in those areas.
Connection between mesh nodes Check the cable route, Ethernet backhaul, ports and the router or access point mode available on the model. If there’s a cable route available, I want to know whether it suits the connection and configuration. Around 27% of consumers prioritise the connection between nodes.
Access and privacy Check both local access through the guest network and the link-sharing and collaboration settings of your photo service. If guests are using the Wi-Fi, I want to keep their network access separate from album permissions. Around 13% of consumers prioritise access management.

Common pitfalls when choosing mesh for photo uploads

  • Assuming a higher Wi-Fi speed means faster internet

    The stated Wi-Fi capacity alone doesn’t tell you how quickly your internet connection can upload photos. ACM ConsuWijzer recommends a wired test close to the router to assess your connection.

    Test over a wired connection first, then compare Wi-Fi in the places where people upload.

  • Placing a wireless mesh node where the signal is already barely reaching

    An extra node still needs a usable connection to the rest of the network. A cable connection may be an alternative if there’s a suitable route available.

    Test the signal where you plan to put the node and see whether wired or wireless backhaul is suitable there.

    A poor location may mean you have to move the node, choose another spot or run a cable after all.

  • Confusing guest network access with album privacy

    A guest network controls access to your home network, but it won’t automatically revoke an album link you’ve already shared. Google Photos Help notes that someone may still be able to use the original link if link sharing is enabled.

    Check your guest network settings separately from the link-sharing and collaboration settings in your photo service.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 range worth comparing if Ethernet backhaul and ports for wired devices matter to you. The XE75 is a separate tri-band Wi-Fi 6E range for a wireless setup.

  • According to TP-Link, the X50 has three Gigabit ports and optional Ethernet backhaul.
  • TP-Link says the XE75 has a 6GHz band that can support backhaul.
  • These model specifications aren’t the same as measured upload performance in a Dutch home.

ASUS

The ZenWiFi AX XT8 is worth comparing if you may connect the nodes wirelessly but want Ethernet backhaul to remain an option.

  • ASUS documents a configurable second 5GHz band for backhaul, as well as support for Ethernet backhaul.
  • The stated Wi-Fi speed isn’t a measured speed for uploading a single photo; check the exact model and setup.

NETGEAR

The Orbi RBK763S is a tri-band model worth comparing if you need to consider several rooms and simultaneous use.

  • NETGEAR specifies a dedicated connection between the router and satellite, as well as Gigabit ports, for this set.
  • NETGEAR’s coverage and performance claims aren’t independent measurements in a Dutch home.

Joybuy mesh Wi-Fi products

These Joybuy products are mesh Wi-Fi systems for anyone who wants Wi-Fi in several areas of the home. When choosing, consider the size of the set and how the nodes connect to each other.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A mesh set for anyone who wants Wi-Fi in several places where they upload; check that the connection between the nodes suits your home.

View at Joybuy
TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5, 2.4 GHz and 5 GHz

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (2.4 GHz/5 GHz)

A 3-pack for anyone who wants to extend Wi-Fi to several areas of the home; test that each node has a usable connection where you plan to place it.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7, 2.4 GHz, 5 GHz and 6 GHz

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7 (2.4 GHz/5 GHz/6 GHz)

A mesh set for anyone who wants to connect several areas of the home; check that the set and your chosen placement suit your home.

View at Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7, 2.4 GHz and 5 GHz

ASUS ZenWiFi BD4, dual-band Wi-Fi 7 (2.4 GHz/5 GHz)

A mesh system for anyone who wants Wi-Fi in several areas; check in advance which connection between the nodes suits your home and setup.

View at Joybuy
TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5, 2.4 GHz and 5 GHz

TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5 (2.4 GHz/5 GHz)

A 3-pack for anyone who wants Wi-Fi in several rooms; assess where to place the nodes by checking the signal in the areas where people upload.

View at Joybuy

Frequently asked questions about mesh Wi-Fi and photo uploads

Does mesh Wi-Fi always make it quicker to upload a shared photo album?

No. Mesh Wi-Fi doesn’t make your internet connection itself any faster. First, test upload speed over a wired connection by the router, then compare it with Wi-Fi where people upload. Better coverage may help if the Wi-Fi signal is weak, but if your wired upload is slow, the bottleneck lies elsewhere.

Do all mesh nodes need to be connected by cable?

No. Depending on the system, mesh nodes can be connected by cable or wirelessly. TP-Link Support describes both connection options for Deco. For the model you choose, check its router or access point mode and how additional nodes connect to it.

Does a guest network automatically give people the right access to the photo album?

No. A guest network and album permissions control different types of access. Google Photos Help notes that someone may still be able to use the original album link if link sharing is enabled, even after they’ve been removed as a contributor.

What if a mesh system breaks sooner than expected?

According to ACM ConsuWijzer, the retailer is responsible for the statutory guarantee if a product doesn’t do what you could reasonably expect from it. A shorter manufacturer’s warranty doesn’t remove this right; what you can expect depends on the circumstances.

Which product marking should you look for when buying Wi-Fi equipment in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, the equipment must carry the CE marking. Stricter requirements apply to wireless equipment placed on the EU market from 1 August 2025; check the exact model being offered.