Who is this option for?

Uploading photos from a room with a weak signal

You upload photos in the room behind the kitchen and find that the Wi-Fi signal is weaker there than near the router. The location of an extra node and the connection between the nodes are important considerations. Consumentenbond explains how walls and other obstacles can interfere with the signal, while NETGEAR offers placement advice for Orbi.

Uploading photos where an ethernet cable is available

You can run a cable between the rooms and don’t want the connection between mesh nodes to rely on a wireless route past the kitchen. TP-Link Netherlands and ASUS Netherlands explain ethernet backhaul for their respective mesh models.

Uploading photos where running a cable isn’t possible

You can’t run an ethernet cable and want to compare wireless mesh with Wi-Fi via powerline adapters. Devolo explains how the connection works over your home’s electrical wiring, as well as mesh Wi-Fi via its Wi-Fi adapters.

What should you look for when buying?

First check whether the internet connection itself is slow. Then work out which type of connection between the rooms is practical for your home.

What to consider What should you look for? Who is this important for?
Coverage behind the kitchen Check where you could place an extra node and whether it will still have a good connection to the router there. If you upload photos in a room where the Wi-Fi is weaker, the extra node needs a usable connection in that spot. Around 36% of consumers put coverage first.
Upload speed Compare an upload speed test over ethernet with one over Wi-Fi in the room where you upload. To find out whether the delay is caused by your internet connection or your home Wi-Fi, compare both results. Around 29% of consumers are mainly interested in assessing upload speed.
Connection between nodes Check whether you have a suitable network cable or power sockets available, and whether the model you choose supports the connection you want. If you want a practical solution for connecting the rooms, check which connections you can actually use. Around 21% of consumers prioritise the connection between nodes and installation.
Cost and management Compare the number of nodes and connections you need. Also check what information is available about updates and energy use. If you don’t want to buy a set with nodes or features you won’t use, first decide what you want to connect in the chosen locations. Around 14% of consumers prioritise cost and management.

Pitfalls to avoid when choosing

  • Putting an extra mesh node exactly where the signal is weakest

    The extra node needs a usable connection to the rest of the network. Obstacles can weaken that connection.

    Choose a spot where the node still has a good connection to the router. Test the connection there, and don’t put it in a closed cupboard or right next to a microwave.

    A poor location can mean extra repositioning or installation attempts.

  • Mistaking the advertised Wi-Fi speed for your broadband upload speed

    The speed of a wireless connection isn’t the same as the speed at which photos are uploaded over your internet connection.

    Compare a wired upload speed test with one in the room where you upload before choosing a mesh set.

  • Assuming powerline adapters from different product ranges will work together

    Devolo states that Magic 2 WiFi next doesn’t work with adapters from the dLAN range.

    Check the exact range of your existing adapters and test the connection in the rooms where you want to use them.

  • Choosing a newer Wi-Fi standard as the deciding factor

    A Wi-Fi version on its own won’t tell you whether a mesh set will solve your upload problem at home.

    First assess coverage, the connection between the nodes and the upload speed you actually measure.

Brands to compare

TP-Link

The Deco X50 is worth comparing if you want separate mesh nodes and may use ethernet backhaul. Check how many nodes are included in the pack you choose.

  • TP-Link says that each Deco X50 has three gigabit ports and supports optional ethernet backhaul.
  • The wireless speeds and coverage areas quoted by TP-Link don’t predict the connection you’ll get in a home with a kitchen in between.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option to compare if you’re interested in ethernet backhaul and choosing between a single network name or separate ones.

  • ASUS says the XD5 can use ethernet backhaul when ethernet connections are available.
  • Improvements that require a compatible Wi-Fi 6 device won’t automatically apply to older phones or laptops.

devolo

Magic 2 WiFi next combines powerline with mesh Wi-Fi for situations where running an ethernet cable is difficult and the wireless connection between nodes isn’t enough.

  • According to devolo, Magic range adapters connect via your home’s electrical wiring, while the Wi-Fi adapters form a mesh network.
  • Devolo states that dLAN adapters aren’t supported. The quoted maximum speed doesn’t predict the results you’ll get over your home’s electrical wiring.

NETGEAR

Orbi is worth considering if you’re looking at a router with a separate satellite and can assess where to place it at home.

  • NETGEAR advises placing Orbi equipment outside cupboards and away from metal and microwaves. An indicator on the satellite can help you tell whether it’s too far from the router.
  • This placement advice isn’t an independent performance test of a specific set.

KPN

SuperWifi is a provider-supplied option to compare with separately purchased mesh equipment if you’re a KPN customer and installation support is important to you.

  • KPN explains how to connect SuperWifi nodes wirelessly and provides installation support.
  • Check the terms and whether it’s suitable for your subscription. KPN’s statements about coverage and speed aren’t measurements of performance in your home.

Joybuy product picks

These mesh sets are designed for a wireless set-up or a wired connection between mesh nodes, depending on the model.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A two-pack to compare if you’re weighing up wired and wireless connections between mesh nodes.

View at Joybuy
TP-Link Deco E4 3-pack dual-band Wi-Fi 5

TP-Link Deco E4 3-pack

This three-node set is an option if you want to connect several areas of your home using mesh Wi-Fi.

The product name specifies dual-band Wi-Fi 5 (802.11ac) on 2.4 and 5 GHz. If you connect devices by cable, bear in mind that the Ethernet ports support speeds of up to 100 Mbps, according to the product information.

View at Joybuy
ASUS ZenWiFi BT8 2-pack tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack

A two-node set to compare if you’re interested in a tri-band model. The product name specifies Wi-Fi 7 (802.11be) and bands at 2.4, 5 and 6 GHz.

View at Joybuy
TP-Link Deco X20 AX1800 Wi-Fi 6 2-pack

TP-Link Deco X20 AX1800 Wi-Fi 6 2-pack

This two-pack is an option if you want to connect the mesh nodes using ethernet backhaul. Check that you have the necessary cable and connections available.

View at Joybuy
TP-Link Deco M4 3-pack dual-band Wi-Fi 5

TP-Link Deco M4 3-pack

A three-node set to consider if you want to connect several areas wirelessly.

The product name specifies dual-band Wi-Fi 5 (802.11ac) on 2.4 and 5 GHz.

View at Joybuy

Frequently asked questions about mesh Wi-Fi and uploading photo albums

How can you tell whether mesh will help with uploading photos?

First, measure your upload speed using a computer connected to your home network via ethernet. Then measure it over Wi-Fi in the room where you upload. If the wired connection itself is slow, look into your internet service or provider. If you notice the difference mainly over Wi-Fi, consider the placement of the mesh nodes and the connection between them. Consumentenbond describes uploading as outgoing internet traffic.

Does a mesh node need to be in the kitchen?

No. Place the node where it still has a good connection to the main router and can reach the room where you upload. For Orbi, NETGEAR advises keeping nodes away from microwaves, metal and enclosed cupboards. Check the connection in the location you actually want to use.

Can you use your own mesh router in the Netherlands?

According to ACM ConsuWijzer, you’re free to choose your router. However, using your own modem or a specific network connection may involve technical requirements and settings. Ask your provider which configuration you need, and keep your equipment secure and up to date.

What product requirements apply to Wi-Fi equipment in the Netherlands?

Radio equipment placed on the European market must meet the applicable RED requirements and carry the required CE marking. Since 1 August 2025, the applicable RED 3.3 cybersecurity requirements have also been in force. Which requirements apply depends on the device’s features. The Dutch Authority for Digital Infrastructure explains these requirements.

What are your rights if a set you bought online isn’t suitable or stops working?

Online purchases generally come with a 14-day cooling-off period, although there are exceptions. If a product breaks too soon, you may also have statutory rights. What you could reasonably expect from the product is relevant, and a manufacturer’s guarantee doesn’t replace those statutory rights. ACM ConsuWijzer explains the cooling-off period and guarantees.