Who is this relevant to?

Uploading photos over weak Wi-Fi

You’re sending larger photo albums from a room where the Wi-Fi is weaker than it is by your router. First, compare a speed test using a wired connection with the connection where you upload, as recommended by the Consumers’ Association.

Better coverage in a narrow hallway

You’re looking for better coverage, but don’t want a device or cable in the way. Positioning it outside the walkway and, if there’s a cable route, mounting it on a wall or ceiling may be worth considering.

Wi-Fi blocked by obstacles

You want to reach a room beyond walls or other obstacles. Compare a wireless connection between the nodes with an existing network cable or a suitable powerline solution.

What should you look for?

Test your existing connection first

Choose this if: the upload speed is slow next to your router, or moving the router could fix the weak spot.

Bear in mind: you may need to reroute a cable or contact your internet service provider.

Wireless mesh with two nodes

Choose this if: your internet connection is fast enough and there’s a suitable place for an extra node.

Bear in mind: walls, distance and the position of both nodes affect the wireless connection.

Mesh with Ethernet backhaul

Choose this if: you have a suitable network cable route and a freestanding node or cable would be inconvenient.

Bear in mind: you’ll need a cable route; with PoE, the power supply or network equipment must also be suitable.

Mesh over power lines

Choose this if: running Ethernet isn’t practical and you have suitable power sockets.

Bear in mind: you’ll need to check that the sockets and connection in your home are suitable.

Buying concern What to look for Who should consider this?
Upload speed or Wi-Fi? Test using a cable next to your router and compare it with Wi-Fi where you upload. I want to find out whether Wi-Fi or my internet connection is slowing down my photo uploads; around 36% of consumers prioritise identifying the cause.
Positioning in the hallway Check the available space, mounting options and route for the power supply. If a node or cable gets in the way, I’m looking for a suitable spot outside the walkway; around 29% of consumers prioritise keeping the way clear.
Connection between nodes Check whether Ethernet backhaul is possible; otherwise, compare wireless positioning or a suitable powerline option. I want to reach the room beyond obstacles, so I’m focusing on the connection between the nodes; around 21% of consumers prioritise this connection route.
Number of nodes and aftercare Choose the number based on your home’s layout and coverage; check the terms for any additional features. If I don’t want unnecessary extra nodes or services, I check what my home and usage require; around 14% of consumers prioritise the number of nodes they need and aftercare.

Common pitfalls

  • Confusing high Wi-Fi speed with fast photo uploads

    A mesh system won’t fix a slow internet upload speed at your router.

    First, compare the upload speed using a network cable next to your router with the Wi-Fi speed where you send photos. Only then choose the type and number of nodes.

  • Choosing an extra node without a suitable place for it

    The location needs to work for the connection, as well as for the walkway, power supply and any cable route in your narrow hallway.

    Decide in advance where the nodes can be placed or mounted, and check the options for the exact model.

    A cable route may require extra installation work; a PoE setup also needs a suitable power supply or network equipment.

  • Choosing more nodes or features than you need

    A larger system isn’t automatically necessary; the number of nodes depends on your home’s layout and coverage.

    Start with the areas you want to cover and check how expansion and any extra features work for each model.

Brands to compare

The models mentioned offer different ways to connect or position mesh nodes; their specifications alone can’t predict upload speeds in your home.

TP-Link

The Deco X50 is worth considering if you want to compare wireless and wired mesh. The Deco X50-PoE may suit you if wall or ceiling mounting and PoE work with your cable route.

  • TP-Link lists Ethernet backhaul for the Deco X50, and wall and ceiling mounting plus PoE for the Deco X50-PoE.
  • These specifications don’t tell you what upload speed you’ll get at home. Check the exact model and the PoE power supply it requires.

devolo

The Magic 2 WiFi 6 next Starter Kit is an option to look into if you want to run your network through existing power lines.

  • devolo describes this model as offering powerline and mesh functionality.
  • These features alone don’t tell you whether your power sockets are suitable or what speed you can achieve at home.

ASUS

The ZenWiFi AX (XT8) is a tri-band Wi-Fi 6 system to compare if you want to connect the nodes wirelessly and can position them well.

  • ASUS specifies the XT8 as a tri-band Wi-Fi 6 system.
  • The stated coverage and combined Wi-Fi speed aren’t measured upload speeds for your home or hallway.

Mesh products at Joybuy

This selection includes mesh systems with two units. In a narrow hallway, pay particular attention to where you can put the extra node and which connection route will work in your home.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68 (2-pack)

A two-node system for using Wi-Fi in more than one area of your home. Take a measurement to see where an extra node might be useful.

  • Pack of 2 units.
View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

A two-node mesh system for comparing coverage in different areas. Check in advance whether a cable route will work with your setup.

  • Wi-Fi 6.
  • AX1800.
  • Pack of 2 units.
View at Joybuy
ASUS ZenWiFi BT10, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7

A two-node mesh system to compare for different placement options. Check the coverage where you upload your photos.

  • Tri-band: 2.4 GHz, 5 GHz and 6 GHz.
  • Wi-Fi 7 (802.11be).
  • Pack of 2 units.
View at Joybuy
TP-Link Deco X50-PoE, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

A two-node system to consider if PoE and the positioning work with your cable route. Check the required power supply in advance.

  • Dual-band: 2.4 GHz and 5 GHz.
  • Wi-Fi 6 (802.11ax).
  • Pack of 2 units.
View at Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

A two-node system to compare if running a cable between mesh nodes will work in your home. Check the route before deciding where to place them.

  • Dual-band: 2.4 GHz and 5 GHz.
  • Wi-Fi 6 (802.11ax).
  • Pack of 2 units.
View at Joybuy

Frequently asked questions

When won’t mesh help with uploading your photos?

If your upload speed is slow even when you’re connected to your router with a network cable, first look into your internet connection or package. Compare a wired test with a test where you usually upload.

Does the extra Wi-Fi node need to go in the middle of the narrow hallway?

No, the node doesn’t need to be in the middle of the hallway. Try a spot where it stays connected to the network and can reach the room where you upload. An adjoining room or a model that supports wall or ceiling mounting could be an alternative.

How many mesh nodes should you buy to start with?

The Consumers’ Association recommends starting with two nodes for most homes, then adding more later if needed. Your home’s layout and measured coverage will determine whether that’s enough.

What rules apply to mesh Wi-Fi in the Netherlands?

Radio equipment placed on the EU market must meet radio equipment requirements and carry CE marking. Additional cybersecurity requirements have also applied since 1 August 2025. The Dutch Authority for Digital Infrastructure explains these requirements. Check the product information for the exact model, as the general rules don’t automatically confirm that an individual product on sale complies.