A mesh system is most worthwhile when a wired test gives good results but the Wi-Fi signal is weak where you’re holding your workshop. Mesh won’t fix a problem with your internet connection itself. Next, consider where to place the nodes, whether you can use Ethernet backhaul and which Wi-Fi standards your devices support, rather than focusing only on the advertised top speed.
Who might benefit from mesh Wi-Fi?
Workshop attendee with unreliable Wi-Fi
If your connection keeps dropping during a session, it’s worth checking whether the problem is with your Wi-Fi or your internet connection. The Consumers’ Association recommends a wired speed test to assess your connection.
Resident with a distant workspace
If you’re joining the workshop from behind walls, on another floor or far from the router, you’ll want to know where extra Wi-Fi nodes can still connect to each other. The Consumers’ Association stresses the importance of placing them with as few obstacles as possible between them.
Household with a mix of devices
If you still use older Wi-Fi or smart home devices alongside newer ones, it’s worth checking which Wi-Fi standards those devices support. The Consumers’ Association notes that older devices won’t automatically benefit from the improvements of a newer Wi-Fi generation.
What should you look for?
First, work out whether the problem is with your internet connection or a weak Wi-Fi signal. Then consider placement, device compatibility and the features you need.
Mesh with a wired connection between nodes
Choose this if: network cables and suitable connections are available between the relevant rooms.
Bear in mind: you’ll need suitable cabling, so check the connections on the system you choose.
Mesh with wirelessly connected nodes
Choose this if: your wired internet connection works well, but Wi-Fi coverage is poor where you’re holding your workshop and running cables isn’t practical.
Bear in mind: the nodes still need to be within good range of each other; walls and other obstacles can affect the connection.
Check your existing connection first
Choose this if: a wired test also gives poor results, or moving the router already improves coverage where you’re holding your workshop.
Bear in mind: measure and adjust your existing setup before you consider buying anything. Mesh won’t increase the speed of your internet connection itself.
| Consideration |
What to look for when buying |
Who is this important for? |
| Reliable workshop connection |
Compare a wired speed test with the Wi-Fi experience where you’re holding your workshop. Also check whether you can connect your computer there directly using a cable. |
During a live workshop, my main priority is avoiding connection dropouts; around 36% of consumers put a reliable connection during the session first. |
| Coverage where you’re holding the workshop |
Check where your current signal is weak and position extra nodes so they can still establish a usable connection with another node. |
If my workspace is on another floor or behind walls, I want to know where an extra node can still get a signal; around 29% of consumers give coverage in a distant location top priority. |
| Device compatibility |
Check the Wi-Fi standards and frequency bands supported by your devices and the system you choose. Test important smart home devices after installation. |
I want to keep using my existing devices without assuming they can take advantage of a newer Wi-Fi standard; around 21% of consumers put compatibility first. |
| Buying and running costs |
Work out how many nodes your setup requires and whether you’ll need cabling or paid extra features for the way you plan to use it. |
I don’t want to choose nodes or extra features I don’t need; around 14% of consumers give keeping total buying and running costs down top priority. |
Common mistakes when choosing mesh Wi-Fi
-
Assuming a higher Wi-Fi speed on the box means a faster internet connection
A wired test can show that the bottleneck is already upstream of your Wi-Fi network. Wireless performance also depends in part on your home and the devices you use.
Start with a wired test, then check the Wi-Fi where you’ll be joining the workshop.
-
Putting an extra node where the signal is already almost gone
With a wireless connection, a mesh node needs to be able to maintain a good connection with another node.
Choose a spot with as few obstacles between nodes as possible, then test the connection where you’re holding your workshop.
-
Assuming a newer Wi-Fi standard will make all your devices faster
According to the Consumers’ Association, older devices can connect to a newer Wi-Fi system, but they won’t automatically benefit from the improvements of a newer standard.
Check which Wi-Fi generations your devices support and what problem you want to solve.
-
Confusing extra subscription features with essential basics
Product information for eero 6+ states that certain online security tools and network features are available through a separate subscription.
Check which features are included with the system you choose, and review subscription and warranty terms separately.
Mesh Wi-Fi brands to consider
TP-Link
The Deco X50 is a Wi-Fi 6 mesh option to consider if you’re looking at a system with several nodes and the possibility of a wired connection between them.
- TP-Link lists three Gigabit ports per node and optional Ethernet backhaul for the Deco X50.
- Advertised Wi-Fi speed and coverage aren’t guaranteed in every home; obstacles and device limitations can also have an impact.
ASUS
The ZenWiFi XD5 is worth considering if you want the option to set up Ethernet backhaul or separate network names for Wi-Fi bands.
- ASUS lists support for Ethernet backhaul and older Wi-Fi generations, as well as the option to use separate network names.
- According to ASUS, some 160 MHz capabilities vary by country. Check what the version you choose and your devices support.
eero
The eero 6+ is worth considering if app-based set-up and expansion with compatible eero hardware suit your needs.
- Product information for eero 6+ mentions app-guided set-up and expansion with compatible hardware.
- Some additional security tools and network features are available through a separate subscription; check the terms before choosing a system for these features.
NETGEAR
The Orbi 370 series is a Wi-Fi 7 option to look into; the manufacturer description cited here relates to the RBE372 system.
- NETGEAR describes the RBE372 as a system with a router and satellite, and lists automatic updates and WPA3.
- Check that the RBE372 version described matches the product you’re considering.
Joybuy products for mesh Wi-Fi at home
The products below are TP-Link Deco mesh systems for multiple rooms. They differ in Wi-Fi standard, number of units and cabling options, among other things.
No image available
TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5
A three-unit system for connecting multiple rooms with mesh Wi-Fi, with support for Wi-Fi 5 devices.
Three mesh units; dual-band at 2.4 and 5 GHz; Wi-Fi 5 (802.11ac); two network ports per unit.
View at Joybuy
No image available
TP-Link Deco X20 (2-pack), AX1800 Wi-Fi 6 mesh
An option to consider if Ethernet backhaul is important for the connection between mesh nodes.
Two units; Wi-Fi 6; Ethernet backhaul option according to the product description.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6
An option for multiple rooms if you might want to connect the mesh nodes to each other by cable.
Three units; dual-band at 2.4 and 5 GHz; Wi-Fi 6. TP-Link lists three Gigabit ports per node and optional Ethernet backhaul for the Deco X50.
View at Joybuy
No image available
TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6
A system to consider if you’re looking at a mesh set-up with Power over Ethernet (PoE).
Two units; dual-band at 2.4 and 5 GHz; Wi-Fi 6; PoE support; two Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E
An option to compare if you’re looking for a tri-band mesh system for a household with devices from different Wi-Fi generations.
Three units; tri-band at 2.4, 5 and 6 GHz; Wi-Fi 6E. The product description also lists support for Wi-Fi 4, Wi-Fi 5 and Wi-Fi 6.
View at Joybuy
Frequently asked questions about mesh Wi-Fi for a workshop
How can you tell before buying whether mesh could improve your workshop connection?
Test your internet connection using a computer connected with a network cable, then compare the results with the Wi-Fi experience where you’re holding your workshop. If the wired connection is poor, investigate your internet connection first. If the Wi-Fi signal is the main problem in that location, moving your router or adding an access point could help.
Where should you put a wirelessly connected mesh node?
Place the node where it can still establish a usable connection with another node, with as few obstacles between them as possible. Then test the connection where you’ll be joining the workshop.
Will older Wi-Fi devices work with a newer mesh system?
Older devices can connect to a newer Wi-Fi system, but they won’t automatically benefit from the improvements of a newer standard. Check which Wi-Fi generations and frequency bands your devices support, and test important smart home devices after installation.
What do the CE mark, cooling-off period and warranty mean when buying in the Netherlands?
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry a CE mark, according to the Dutch Authority for Digital Infrastructure. Online consumer purchases often come with a statutory 14-day cooling-off period after delivery, although there are exceptions. ACM Consumer Information also explains that the statutory guarantee is separate from a manufacturer’s warranty. It covers whether a product does what you could reasonably expect it to do.
How can you keep your mesh network secure?
Keep your router and other Wi-Fi devices up to date, use a strong password and secure your network. Check how updates are provided for the system you choose and which security settings you’ll need to configure yourself.