Who is mesh Wi-Fi relevant for?

Participants who want to stay connected

You want to be able to hear clearly and follow the video during a workshop. If the connection keeps dropping out, check whether this also happens close to the router or over a cable before choosing mesh as a solution.

Users in a tricky spot

You join workshops from another floor or a room where the Wi-Fi signal is weak. In that case, the number of points, where you place them and the connection between them are all worth considering.

Households with multiple sessions at once

Several people at home are using video or other network applications at the same time. So check not only your local network, but also whether your shared internet connection is the bottleneck.

What should you look for when choosing?

First find out where the connection is dropping out. Then decide how many points you need and whether to connect them wirelessly or via Ethernet.

What to consider What should you check? Who should pay particular attention?
A stable workshop connection Compare the connection by the router, where you attend the workshop and, if possible, via Ethernet. Check whether the system supports wired backhaul. If I want to follow the video and audio without interruptions during a workshop, I first need to know where the connection is dropping out. Around 36% of consumers prioritise stability.
Coverage where you work Work out where participants will be sitting and where a point can still connect reliably to the network. Don’t treat the stated coverage as a guarantee for your home. If you work in a room or on a floor with weak Wi-Fi, a point needs to provide a usable connection there too. Around 29% of consumers prioritise coverage where they work.
Simultaneous users Count the workshop locations and other demanding applications. If possible, test the network at a busy time and check which devices can be connected by cable. When several people at home are using video at the same time, I want to know whether both the home network and the internet connection can cope. Around 21% of consumers focus mainly on simultaneous use.
Connectivity and features Check the router or access point mode, the number of WAN and LAN ports, and whether the features you want are available in that mode. If I want to keep my existing router, I need to know in advance how the system connects to it and which features are available. Around 14% of consumers focus mainly on connectivity and recurring costs.

Common buying mistakes

  • Assuming the advertised Wi-Fi speed is the speed you’ll get during a workshop

    Your actual connection depends on factors such as your internet service, obstacles, network congestion and the connection between Wi-Fi points. A higher stated speed won’t automatically resolve these bottlenecks.

    Test the connection where you attend the workshop and, if possible, compare it with a wired connection.

  • Putting an extra wireless point in a complete dead zone

    An additional point also needs a usable connection to the rest of the mesh network.

    Place it closer to a point with a good connection, or use Ethernet backhaul if possible.

  • Assuming access point mode keeps all router features

    TP-Link says that some Deco router features, including parental controls and port forwarding, aren’t available in access point mode. Available features vary by system and operating mode.

    Check the feature list for the model and mode you’re considering, including any subscription requirements for features you want to use.

Brands to consider

TP-Link

The Deco X50 and X50 Pro have different port configurations. According to TP-Link, the X50 has three gigabit ports per point, while the X50 Pro has two 2.5-gigabit ports per point.

  • The Deco X50 supports optional wired backhaul.
  • According to TP-Link, some router features aren’t available in Deco access point mode. Stated coverage and capacity are manufacturer claims, not a guarantee of the speed you’ll get in your home.

ASUS

The official ZenWiFi BD4 specifications list dual-band Wi-Fi 7, AiMesh, access point mode and two 2.5-gigabit ports.

  • The listed networking options and ports are relevant if you need them for your setup.
  • Check whether you’re choosing the 2- or 3-pack; ASUS says that the contents may vary by region. Specifications don’t prove how well the system will perform in your home.

FRITZ!

The FRITZ!Mesh Set 1700 is available as a set of three repeaters. According to FRITZ!, it can be used with an existing router or modem.

  • A set of three repeaters could suit you if you want to connect several areas of your home.
  • Manufacturer claims about coverage, updates and ease of use don’t prove how the set will perform in a particular home.

NETGEAR

According to NETGEAR, the Orbi 370 series includes dual-band Wi-Fi 7 mesh systems with a 2.5-gigabit internet port.

  • The connectivity options are worth comparing if you have a specific need for them.
  • NETGEAR describes Enhanced Backhaul as an advantage; this is a manufacturer claim. Check the ports and contents of the specific set. Wi-Fi 7 won’t fix an unstable internet connection.

Joybuy products

This selection includes Wi-Fi 6 and Wi-Fi 7 mesh systems, with different numbers of points and possible connectivity options. Check the model and connection that are right for your home.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

This mesh system with two points could suit you if you need Wi-Fi in several areas. Check which ports and connection between the points are right for your setup.

View at Joybuy
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack, tri-band wifi 7

This 2-pack is an option if you’re looking for a mesh system to cover several areas. The product name lists tri-band Wi-Fi 7; check that it meets the needs of your devices and network.

View at Joybuy
ASUS ZenWiFi BD4 Wi-Fi 7

ASUS ZenWiFi BD4 wifi 7

This mesh option could suit you if you’re looking for a Wi-Fi 7 system. Check the model, the ports you need and whether the operating mode you choose works with your existing router.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

The product name lists a mesh system with two points and Wi-Fi 6. Check that the connection you want between the points, such as Ethernet backhaul, is suitable for your home.

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band wifi 6

This 3-pack is an option if you need Wi-Fi in several areas of your home. The product name lists dual-band Wi-Fi 6; check that the placement and connection between the points are suitable for your home.

View at Joybuy

Frequently asked questions

Will mesh Wi-Fi make my internet connection faster during a workshop?

No, mesh Wi-Fi doesn’t increase the capacity of your internet connection. It can, however, help extend wireless coverage around your home. Zoom describes available bandwidth as a possible bottleneck for audio and video, so also compare the connection close to the router or via Ethernet.

Where should I place wireless Wi-Fi points?

Place a wirelessly connected point somewhere it can still get a good connection to another point—not right in the middle of a complete dead zone. If cabling is an option, you could also consider Ethernet backhaul.

Can I keep my provider’s router?

That depends on the system and operating mode you choose. TP-Link says that Deco can be used in access point mode behind an existing main router, but some Deco router features won’t be available. Check the instructions for your router and the model you choose.

Should I expect any extra costs after buying?

That depends on the features and setup you choose. The Deco X50 manual distinguishes between a free HomeShield basic plan and paid Pro features; check the current terms. Also factor in any extra points and Ethernet cabling.

Which CE requirements apply to mesh Wi-Fi sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure (RDI), radio equipment must meet the applicable European requirements; the manufacturer applies a CE mark when the product is compliant. Since 1 August 2025, the strengthened requirements have also covered cybersecurity. A declaration for one model doesn’t automatically confirm that every other model or individually supplied unit is compliant.