Who is mesh Wi-Fi relevant for?

Workshop participants with a weak signal

If your connection mainly drops out where you’re taking the workshop, look at the placement of the mesh points and the connection between them. The Dutch Consumers’ Association highlights how much the position of a Wi-Fi extender matters.

Housemates on a busy network

If other devices are online at the same time, it’s important to work out whether the limitation is your home Wi-Fi or the internet connection itself. Tweakers explains how wireless mesh points can share network capacity.

Residents who don’t manage the router

If a housemate or your provider’s router manages the network, check which features will remain available in the operating mode you choose. TP-Link explains that some Deco features aren’t available in access point mode.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Coverage where you’re taking the workshop Compare the connection by the router with the one where you’re taking the workshop. Check where you could place an extra point and how it would connect. If the workshop keeps dropping out behind walls or on another floor, I want to know whether a mesh point can get a usable connection there. Around 36% of consumers prioritise coverage where they’re taking the workshop.
Simultaneous network use Compare Wi-Fi with a wired connection and check whether the operating mode you choose supports prioritisation. When housemates are online at the same time, I want to find out whether dropouts are caused by Wi-Fi congestion or the internet connection itself. Around 29% of consumers say simultaneous use is their main concern.
Connection between mesh points Check whether you can connect the required units by cable, which Ethernet ports are available and how the system handles wireless backhaul. If it’s possible to run cables, I want to know whether Ethernet between the mesh points will work for me. Without cables, I pay particular attention to the wireless connection between them. Around 21% of consumers prioritise whether backhaul is practical to set up.
Shared router Find out who manages the router and which features will remain available in the router or access point mode you choose. If a housemate or your provider’s router manages the network, I want to agree in advance who can change settings such as prioritisation. Around 14% of consumers prioritise shared router management.

Common purchasing mistakes

  • Assuming the advertised maximum speed is the speed you’ll get during your workshop

    Your connection also depends on your internet line, the placement of the units and the connection between mesh points. In a test of the Deco X50, Tweakers found differences between devices connected directly and devices connected to wireless satellites.

    Find out where the slowdown is occurring and assess the system in the setup you’ll actually be able to use.

  • Expecting QoS to remain available behind any existing router

    TP-Link describes QoS as a router feature that won’t remain available in the Deco app when Deco is in access point mode.

    Agree the operating mode with whoever manages the shared router and check where you can set prioritisation, if available.

  • Overlooking backhaul and the number of units

    A wireless satellite depends on its connection to the network. A single unit, a two-pack and a three-pack are also different package options.

    Check what’s included in the package, the ports and where each unit can be placed before choosing a system.

  • Confusing the manufacturer’s warranty with your statutory rights

    A stated manufacturer’s warranty period doesn’t automatically represent the full duration of your statutory rights. The Netherlands Authority for Consumers and Markets’ Consumer Information Desk explains that statutory warranty in the Netherlands isn’t tied to a single fixed period.

    Read the manufacturer’s warranty terms and keep them separate from your statutory rights.

Brands worth comparing

TP-Link

The Deco range includes dual-band Wi-Fi 6 models and options with other Wi-Fi generations. Compare the number of units and the type of connection you can use between them.

  • TP-Link lists three gigabit ports per Deco X50 unit and supports optional Ethernet backhaul.
  • A Tweakers test of the X50 three-pack found that setup was straightforward, but performance over wireless satellites was lower under load. Advanced Deco router features may not be available in access point mode.

ASUS

The ZenWiFi XD5 is a dual-band option for which ASUS documents Ethernet backhaul support. Features of other ZenWiFi models don’t automatically apply to the XD5.

  • ASUS says the XD5 supports Ethernet backhaul when Ethernet ports are available.
  • A Tweakers test of the ZenWiFi BD4 found different results for wired and wireless satellites. Those test results apply to the BD4, not all ASUS systems.

FRITZ!

According to the manufacturer, the FRITZ!Mesh Set 2700 can be used with a FRITZ!Box or another router.

  • The manufacturer describes the set as a pack containing two repeaters.
  • Check that the connections and setup suit the router used in your home.

NETGEAR

The Orbi RBK762S is an example of a system with a separate wireless backhaul connection, designed for situations where running cables isn’t an option.

  • NETGEAR lists a dedicated backhaul for the RBK762S.
  • This model specification doesn’t prove that the system will work better in every workshop location. Also consider the number of units and where you can place them.

eero

eero is a brand to consider if you’re looking at wired or wireless backhaul.

  • eero describes both wired and wireless backhaul.
  • According to eero, the eero Beacon and eero 6 Extender don’t have an Ethernet port. So, if you want to use cabling, check exactly which units are included in the package.

Mesh Wi-Fi products at Joybuy

These mesh systems provide Wi-Fi in several areas of your home. They come with different numbers of units and offer wired or wireless connections between the points.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A two-unit system to compare if you’re looking for multiple Wi-Fi points and the option of wired or wireless backhaul.

Tri-band Wi-Fi with MLO; Ethernet ports on each unit.

View at Joybuy
TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 (3-pack)

A three-unit system to consider if you want to place Wi-Fi points in several areas. Check that the wired ports suit your needs.

Dual-band Wi-Fi 5 (2.4 GHz and 5 GHz); two Ethernet ports per unit, with a maximum speed of 100 Mbps.

View at Joybuy
TP-Link Deco PX10 mesh system with Powerline

TP-Link Deco PX10

A mesh option to compare if you want to combine Wi-Fi with Powerline over your existing electrical wiring.

Dual-band Wi-Fi 6; the product description lists router and access point modes, as well as Ethernet ports.

View at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack

ASUS ZenWiFi BT8 (2-pack)

A two-unit system to compare if you want several frequency bands in your Wi-Fi setup.

Tri-band on 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7.

View at Joybuy
TP-Link Deco M4 mesh system, 3-pack

TP-Link Deco M4 (3-pack)

A three-unit mesh system to consider if you want Wi-Fi in several areas and would like to manage setup and placement using the Deco app.

Dual-band Wi-Fi 5 on 2.4 GHz and 5 GHz.

View at Joybuy

Frequently asked questions

How can you tell whether mesh will help before your online workshop?

Compare the connection where you’re taking the workshop with the one by the router and, if possible, test it over Ethernet. If the wired connection is poor too, investigate your internet connection first; mesh is designed to improve your local Wi-Fi coverage.

Can you use Deco behind an existing router from your provider?

Yes. TP-Link says Deco can extend an existing network’s coverage in access point mode, and Ethernet backhaul is still possible. The main router then manages the clients, so check in advance which Deco router features, including QoS, will no longer be available in the Deco app.

Do you have to use your internet provider’s router in the Netherlands?

No. The Netherlands Authority for Consumers and Markets’ Consumer Information Desk says you can choose your own router in the Netherlands. Connecting directly to your provider’s network does involve technical and security requirements; using a mesh system behind your existing router is a different setup.

What should you maintain after installation?

Keep your network equipment’s firmware up to date. TP-Link lists up-to-date Deco firmware as a requirement for the access point setup described, while the Netherlands Authority for Consumers and Markets’ Consumer Information Desk advises keeping your own network equipment updated for security.

What should you check about the warranty and extra components?

Check what’s included in the system and whether you’ll need cables or extra units for your chosen setup. In the Netherlands, statutory warranty depends on what you can reasonably expect from the product, according to the Netherlands Authority for Consumers and Markets’ Consumer Information Desk; it’s separate from any stated manufacturer’s warranty period.