Mesh Wi-Fi can help if the Wi-Fi signal is weak where you’re presenting, but adding extra nodes won’t fix a slow internet connection. So first, test the connection using a wired connection at the router and at your workstation. If mesh is a good fit, compare the connection between nodes, the ports and the network features you need.
Who is mesh Wi-Fi relevant for?
Presenter dealing with patchy Wi-Fi
You present from a room where the connection is weaker than it is near the router, and want to know whether an extra Wi-Fi node could help. The Consumentenbond recommends testing the connection using a wired connection too.
Team sharing one network
Several participants are using the same local connection at the same time. So you’ll want to consider the connection between Wi-Fi nodes and the load on the network.
Manager of a shared workspace
You’re connecting Wi-Fi nodes to an existing router and want to decide what access visitors should have to the main network. Check the network mode and guest access settings for the model you choose.
What should you look for when choosing?
First, find out where the connection is dropping out. Only then decide between repositioning your equipment, setting up a wired access point or using mesh with a wired or wireless connection between nodes.
Keep your existing router and test first
Choose this when: you’re not yet sure whether weak Wi-Fi at the presentation location is the cause.
Bear in mind: repositioning won’t help if the internet connection itself is too slow or the workstation still has poor coverage.
Mesh with a wired connection between nodes
Choose this when: several workstations have weak coverage and you can run cables between suitable locations.
Bear in mind: installing the cabling takes work; also count the ports your computers will need.
Mesh with a wireless connection between nodes
Choose this when: you need extra coverage but can’t run cables between the nodes.
Bear in mind: position the nodes where they can still connect well to each other; under heavy use, the connection between them can limit performance.
One router or a wired access point
Choose this when: one well-positioned router can cover the room, or one workstation needs extra coverage and a cable is available there.
Bear in mind: this setup won’t automatically provide coverage in other areas with a weak signal.
| What to consider |
What to look for when buying |
Who is this most relevant for? |
| Presenting and participating at the same time |
Check how many devices will be active at once, where they’ll be used and whether you need multiple nodes. Test the connection at the workstations you plan to use. |
If several people are participating at the same time, I want to know whether the local network can handle it and where delays occur. Around 36% of consumers prioritise simultaneous use. |
| Coverage where you’re presenting |
Compare the connection near the router with the connection at the workstations you use. Then decide how many nodes you need and where to place them. |
Above all, I want reliable Wi-Fi in the room where presentations currently drop out. For around 29% of consumers, coverage at the workstation is the top priority. |
| Finding the cause and connecting your system |
Test the internet connection using a computer connected by an Ethernet cable. Then check the mesh system’s network mode and the available cable routes. |
I want to keep my existing connection and first rule out a problem with the internet connection itself. Around 21% of consumers prioritise connecting to their existing network. |
| Guest access and network security |
Check whether the model has a guest network and suitable security settings. After installation, test which local devices guests can access. |
If visitors need internet access, I want to be able to manage their access to the main network. Around 14% of consumers prioritise guest access. |
According to Tweakers, a wired connection between mesh nodes is a reliable way to connect satellites. For each setup, check how many Ethernet ports will be left for computers and other devices.
Pitfalls to avoid when buying
-
Assuming a high advertised Wi-Fi speed is the speed you’ll get for your presentation
Advertised speeds and coverage don’t reflect conditions in your location. A mesh system also won’t fix a problem with the internet connection itself.
First, test the connection using a cable at the router, then at the presentation location. The Consumentenbond recommends connecting a computer via an Ethernet cable for a speed test.
-
Placing a wireless mesh node where it has a poor signal
The nodes need to stay connected to each other, so their position can affect the connection at your workstation.
Plan where each node will go and use wired backhaul if it’s practical. Tweakers recommends a wired connection between mesh nodes.
-
Assuming models with almost identical names are the same
The standard TP-Link Deco X50 and the Deco X50-PoE are separate models with different installation requirements. The number of nodes in the pack also matters.
Check the full model name, number of nodes, ports and power supply for the exact model.
Brands to compare
TP-Link
The Deco X50 range includes Wi-Fi 6 mesh systems with one, two or three nodes. The X50-PoE is a separate model for setups where PoE is relevant.
- TP-Link specifies three gigabit ports per node for the standard Deco X50.
- Check the full model name: the X50 and X50-PoE have different installation requirements. Advertised speeds and coverage areas aren’t measurements taken in your workspace.
ASUS
The ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh range available with one, two or three nodes.
- ASUS lists two 2.5 GbE ports per BD4 node, an access point mode and a guest network.
- According to ASUS, the BD4 uses the 2.4 and 5GHz bands. So, for this model, Wi-Fi 7 doesn’t mean there’s also a 6GHz band.
NETGEAR
The Orbi 770 RBE773 is a tri-band Wi-Fi 7 system with three nodes.
- This model offers a different technical approach to compare with dual-band mesh systems.
- The manufacturer’s performance claims aren’t independent measurements for online presentations. Check that the features and setup suit your workstations and devices.
Mesh Wi-Fi products on Joybuy
These product picks focus on mesh coverage for presentation locations and simultaneous use on a local network. Compare factors such as the number of nodes, the listed connections and the options for wired connections between nodes.
No image available
TP-Link Deco BE68 2-pack
This two-node set may be a good fit if several workstations need coverage and a wired connection between nodes is possible.
The product information lists Wi-Fi 7, MLO and both wired and wireless backhaul. Each node is listed with 10 Gbps, 2.5 Gbps and 1 Gbps ports.
Joybuy
No image available
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7
This two-node set may suit you if two locations need mesh coverage and guest access is a priority.
The product name lists tri-band Wi-Fi 7 and the 2.4, 5 and 6 GHz bands. The product information also lists a guest network and two 2.5 Gbps ports per node.
Joybuy
No image available
ASUS ZenWiFi BD4 dual-band Wi-Fi 7
This model may be worth considering if a wired connection between mesh nodes and guest access are important. Check the pack contents and network mode for your setup.
The product name lists Wi-Fi 7 and the 2.4 and 5 GHz bands. The product information lists an option for wired backhaul, a guest network and two 2.5 Gbps ports per node.
Joybuy
No image available
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6
This three-node set may be worth comparing if several presentation locations need coverage.
The product name lists dual-band Wi-Fi 6. The product information lists optional Ethernet backhaul, OFDMA and MU-MIMO, plus three gigabit ports per node.
Joybuy
No image available
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7
This model may be worth considering if you want to create a single mesh network with multiple units. Check which version and how many units you need.
The product name lists dual-band Wi-Fi 7 on 2.4 and 5 GHz. The product information mentions mesh use with multiple units and management through the Huawei SmartLife app.
Joybuy
Frequently asked questions
Can mesh Wi-Fi help if participants in other locations can’t receive the presentation properly?
Not automatically: mesh nodes only improve the local Wi-Fi network in the places where they’re installed. Test the presenter’s internet connection using a cable and look into the connection during the meeting; participants elsewhere use their own networks.
Do mesh nodes need to be connected to each other by cable?
No, but a cable may be a good option if you can run one between the nodes. Tweakers recommends wired backhaul for a stable connection; if you don’t use a cable, the positioning and wireless connection between nodes matter.
Can you keep your existing provider’s router?
That depends on the setup you want and the network modes supported by the mesh system. ASUS lists an access point mode for the BD4. ACM ConsuWijzer confirms that, in principle, you can choose your own router in the Netherlands, provided it meets the relevant network requirements. That doesn’t mean every setup will work without configuration.
What should you consider for the warranty and any extra equipment you may need?
Factor in any extra mesh nodes and cabling your setup may require. A manufacturer’s warranty is not the same as the statutory guarantee in the Netherlands: according to ACM ConsuWijzer, this depends on what you could reasonably expect from the product.
What legal requirements apply to a mesh Wi-Fi system in the Netherlands?
Radio equipment placed on the market in the Netherlands must meet the relevant European radio equipment requirements and carry the required CE marking. Since 1 August 2025, stricter cybersecurity requirements have also applied to the wireless equipment concerned. The Rijksinspectie Digitale Infrastructuur explains these requirements; check the marking and conformity of the exact model.