Who is this choice relevant to?

Student with a weak signal upstairs

Takes lessons on a different floor from the router and wants to work out where an extra Wi-Fi point would be useful. Consumentenbond describes app-based placement assistance as a way to find suitable locations for the points.

Household with several people online at once

Wants to keep the lesson connection usable while devices elsewhere in the home are online, so compares the connection between mesh points and the available ports. TP-Link and ASUS describe different options for connecting the points.

Buyer with an existing provider’s router

Wants to extend Wi-Fi without replacing the existing internet setup unnecessarily. TP-Link describes access point mode as a common way to add Deco to an existing router; check the installation requirements for your own equipment too.

What should you look for when choosing?

Start with the connection between the points: check whether there’s a network cable in place, whether wireless points can reach each other from suitable locations, and whether powerline is an option with your sockets. Then consider where you’ll take lessons and how the system connects to your existing router.

What to consider What should you check? Who is this important for?
Coverage where you take lessons Choose your usual lesson spot and check the signal there, as well as at a suitable intermediate location for an extra point. If I take lessons upstairs, I want to know whether Wi-Fi will be usable in that exact spot. Around 36% of consumers say coverage where they take lessons is their top priority.
Connection between points Check whether the exact model supports Ethernet backhaul and how it connects in the operating mode you’ve chosen. Without a cable, you can compare wireless mesh and powerline at the locations you have in mind. If I rely mainly on the connection between floors during lessons, I pay attention to how the points connect to each other. Around 29% of consumers say connection stability is their top priority.
Connection to your existing router Check the router or access point mode, the Ethernet ports required and the installation instructions for the exact set. If I want to keep using my provider’s router, I want to know in advance how the mesh system connects to it. Around 21% of consumers say a straightforward connection is their top priority.
Use and support Compare the published information on energy consumption and software updates for the exact model. Also check its CE marking and product documentation. If I’m mainly concerned with running costs and support after purchase, I compare this information before choosing. Around 14% of consumers say use and support come first.

Common mistakes

  • Assuming the quoted top speed is guaranteed on the floor where you take lessons

    Speed and coverage where you take lessons depend partly on distance, walls, floors and placement. Consumentenbond explains that Wi-Fi boosters are assessed in different locations and at different distances.

    Choose based on your usual lesson spot and test the setup in your own home. Bear in mind that you may need an extra point or a cable if the connection isn’t good enough there.

  • Treating the Deco X50 and Deco X50-PoE as the same model

    Consumentenbond describes the Deco X50 (3-pack) as having three Ethernet ports per point. The Joybuy product page in the product information cited here is for the X50-PoE (3-pack), with two ports per point and PoE. The models therefore differ in their ports and power supply.

    Compare the full model name, number of ports and power supply before choosing a set.

  • Connecting a satellite without considering the Deco mode

    TP-Link describes different ways to connect satellites in router mode and access point mode, and warns against creating a network loop.

    Choose the operating mode first, then follow the connection diagram for that mode.

  • Confusing the manufacturer’s warranty with your statutory rights

    ACM ConsuWijzer distinguishes between a promise from the manufacturer or seller and your right to a product that lasts for as long as you can reasonably expect it to.

    Keep your purchase and product information, and contact the seller if you think a product may be faulty.

Brands to compare

TP-Link

Deco offers several ways to connect points: Ethernet backhaul on the X50 and a combination of powerline and Wi-Fi on the PX50.

  • Consumentenbond describes the Deco X50 (3-pack) as a set with three Wi-Fi points and Ethernet backhaul.
  • This information doesn’t say how the PX50 performs or what coverage you’ll get in your home. Also check the exact X50 model and its features.

ASUS

The ZenWiFi AX XT8 is a tri-band mesh model worth comparing if you want to look into adjustable wireless backhaul.

  • ASUS says the XT8 has an adjustable second 5GHz band for backhaul, as well as Ethernet backhaul when wall connections are available.
  • These are manufacturer descriptions, not independent measurements of coverage in a multi-storey home.

FRITZ!

The FRITZ!Repeater 3000 AX is an option for anyone looking to extend a compatible existing FRITZ! mesh setup.

  • FRITZ! lists Wi-Fi 6, tri-band and two gigabit LAN ports for this model.
  • It’s a repeater, so check that it works with your existing router and the mesh configuration you want.

Joybuy products

These Joybuy products are mesh sets suited to extending Wi-Fi to a lesson spot elsewhere in your home. Compare the number of units in each set, the stated connection options and the product information for the exact model.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A good fit if you’re looking for a mesh set for several locations and want to compare wired and wireless connections between points.

Model: BE68. Set: 2-pack.

View at Joybuy
TP-Link Deco E4 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack)

Worth comparing if you’re looking for a mesh set with several points; check how they’ll stay connected across your floors.

Dual-band (2.4 GHz/5 GHz); Wi-Fi 5 (802.11ac).

View at Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4

A good fit if you want to compare a mesh model with a stated wired backhaul option; check the connections on the exact model.

Dual-band (2.4 GHz/5 GHz); Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A set with two points to compare for Wi-Fi in several locations; check whether the stated Ethernet backhaul option suits your router setup.

Wi-Fi 6; set of 2 points.

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A good fit if you want to explore a mesh set with three points and a wired connection between them; follow the instructions for your chosen operating mode.

Dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

View at Joybuy

Frequently asked questions

Do I need to replace my internet provider’s router?

No, not always. TP-Link describes access point mode as a common way to add Deco to an existing router; follow the instructions for the set you choose. According to ACM ConsuWijzer, you’re free to choose your router in the Netherlands, but check the security and connection requirements for your own equipment too.

Where should I place extra Wi-Fi points for lessons upstairs?

Don’t put a point only where the signal is already weak: the points also need to be able to connect to each other. Use the placement assistance provided by your chosen system, then check the connection at your usual lesson spot. If you have a network cable, you can look into Ethernet backhaul.

How can I keep my mesh system secure?

Follow the installation guide and keep the device up to date. ACM ConsuWijzer stresses that updates are important for the security of your network and personal data. So check the update information for the exact model before you buy.

What if the set isn’t suitable for my home or breaks down prematurely?

For online purchases, ACM ConsuWijzer says you generally have a statutory cooling-off period that ends 14 days after delivery. You also have statutory rights: if a product used normally breaks down sooner than you could reasonably expect, the seller must offer an appropriate solution. This is separate from the length of any manufacturer’s warranty.

Is CE marking compulsory for mesh Wi-Fi in the Netherlands?

Yes. Wi-Fi radio equipment sold in the Netherlands must have the correct CE marking. The Dutch Authority for Digital Infrastructure says this marking is compulsory. Check the exact model and its product documentation, not just the product range name.