Who is mesh Wi-Fi suitable for?

Learner with a weak signal where they take lessons

You take your lesson in a room where the Wi-Fi keeps dropping out, and mainly want to know whether you can get a usable connection there. The Consumentenbond describes how to measure Wi-Fi in different locations and at different distances.

Household with multiple people online at once

Someone else may be streaming or making calls while you’re taking your language lesson. You’ll want to consider the connection between your devices, mesh points and the internet, not just the advertised Wi-Fi speed. NETGEAR explains how a wireless backhaul band can also be used for device traffic.

User with an existing router

You want to extend your coverage without replacing your current router unnecessarily. Check the installation mode and compatibility: TP-Link describes an access point mode for Deco, while FRITZ! explains how to extend coverage with a compatible FRITZ!Box.

What should you look for when choosing?

First, work out whether the problem is with your broadband connection, the Wi-Fi where you take your lesson, or the connection between mesh points. For households where an online language lesson takes place alongside other internet use, the main things to check depend on what matters most to you.

What to consider What to look for when buying Who is this important for?
Coverage where you take your lesson Work out which rooms need a mesh point and check how many points are included in the kit. The Consumentenbond assesses Wi-Fi in different locations. If your lesson mainly drops out in one room, you’ll want to know whether you can get a usable Wi-Fi connection there. Around 36% of this group put coverage where they take their lesson first.
Multiple people online at once Check whether the problem also occurs close to the main router or over a wired connection. NETGEAR explains that some systems handle backhaul and device traffic on the same Wi-Fi band. When other people are streaming or making calls at the same time, you’ll want to know where the connection is dropping out and which devices are sharing it. Around 29% of this group put simultaneous use first.
Connection between mesh points Check whether Ethernet backhaul is supported, which ports are available and how to connect the points according to the instructions. TP-Link describes Ethernet backhaul for connections between Deco points. If you can run a cable between mesh points, you’ll want to know whether your chosen setup supports this. Around 21% of this group prioritise the connection between mesh points.
Compatibility with your router For the exact model, check whether it has access point mode or is compatible with your existing FRITZ!Box, and confirm the recommended cabling. Features may vary by model. If you want to keep using your current router, you’ll want to know how the mesh system connects to it. Around 14% of this group put keeping their router first.

Common buying mistakes

  • Assuming a high Wi-Fi speed means your online lesson will run smoothly

    Your connection also depends on your broadband service, distance, backhaul and other internet use at home. The stated radio speed alone won’t tell you how a lesson will perform in your setup.

    Find out where the connection is dropping out and compare conditions where you take your lesson before choosing based on a speed figure.

  • Putting a mesh point where the problem occurs without checking its connection back to the router

    The mesh point itself also needs to connect to the main router; coverage at your lesson device is only part of the journey.

    Plan for both the signal where you take your lesson and the connection between the points. Use Ethernet if it’s practical and supported by your chosen system.

    A wired setup may require extra cabling or a different location for a mesh point.

  • Choosing a kit with the wrong number of points or the wrong version

    A kit with one, two or three points won’t provide the same coverage, and ports or support may vary between versions.

    Check the full model name, pack size, ports and version before you order.

  • Assuming mesh features always work the same way with an existing router

    Router mode and access point mode serve different purposes. TP-Link warns that connecting the system incorrectly, contrary to the model instructions, can create a network loop.

    Choose the mode before connecting any cables, and follow the instructions for your exact model.

Brands to compare

TP-Link

Deco includes versions with different kit sizes, including the X50. It may be worth considering if you’re looking for a complete kit or an extra point.

  • TP-Link describes a choice of router or access point mode for Deco, along with support for Ethernet backhaul.
  • Connections and features may vary by model and software version. The X50 is not the same model as the separate X50-PoE.

ASUS

ZenWiFi BD4 is available in versions with one, two or three points. Check that the kit size and ports suit your setup.

  • ASUS lists dual-band Wi-Fi 7, two 2.5 Gbit/s ports and router, node and access point modes for the BD4.
  • These are model specifications, not an independent assessment of online lesson quality. Check the exact pack version.

FRITZ!

A FRITZ!Repeater is particularly relevant if you already use a compatible FRITZ!Box and want to extend your coverage.

  • FRITZ! says the Repeater 3000 AX can connect to a FRITZ!Box via Wi-Fi or LAN and has two gigabit LAN ports.
  • If you use a different router, check separately whether the mesh features you want will work with it.

NETGEAR

Orbi is worth comparing if you’re considering a system with a separate wireless backhaul.

  • NETGEAR explains that a separate backhaul band can reduce competition with client traffic, and that some systems support Ethernet backhaul.
  • This is the manufacturer’s description, not proof that every Orbi version performs better in every home.

Joybuy product picks

These mesh Wi-Fi options are intended for households looking to improve Wi-Fi coverage in several areas. For the version you buy, check that it has the required CE marking; the Rijksinspectie Digitale Infrastructuur describes this requirement for radio equipment.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68 (2-pack)

A kit with two Deco points may suit a setup where you want mesh coverage in several areas.

Check how you plan to connect the points and whether the connection method works with your existing router.

View at Joybuy
TP-Link Deco E4, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (802.11ac)

A kit with three points may suit you if you want to set up mesh coverage in several rooms.

The product name specifies dual-band Wi-Fi 5 (802.11ac), with 2.4 GHz and 5 GHz. The Ethernet ports are rated for up to 100 Mbps, so bear this in mind if you’re planning a wired connection.

View at Joybuy
ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7 (802.11be)

This kit with two points is an option if you’re looking for a two-unit ZenWiFi mesh setup.

The product name specifies tri-band on 2.4, 5 and 6 GHz and Wi-Fi 7 (802.11be). Check that the version and ports suit your network.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

A kit with two mesh points may suit you if you want to set up Wi-Fi coverage in two areas of your home.

The product name specifies Wi-Fi 6. Check the connection method and the link between the points for your setup.

View at Joybuy
TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 (3-pack), dual-band Wi-Fi 5 (802.11ac)

A kit with three Deco points may suit you if you want to set up coverage in several areas.

The product name specifies dual-band Wi-Fi 5 (802.11ac), with 2.4 GHz and 5 GHz. Check that the kit size suits the layout of your home.

View at Joybuy

Frequently asked questions

Will mesh help if the online lesson also drops out over an Ethernet cable?

Not necessarily. Mesh focuses on Wi-Fi connectivity and coverage within your home network. If the problem also occurs over a wired connection, check your broadband service and lesson device first. The internet connection you need will also depend on the teaching platform and video settings you use.

Can you install mesh alongside your existing router?

According to TP-Link, Deco can be used in router or access point mode. If you want your existing router to continue managing the network, access point mode may be suitable. Follow the connection diagrams for your chosen model; features may vary by model and software version.

Do you need to connect all mesh points by cable?

Not with the Deco setup described by TP-Link: points connected by cable can use Ethernet backhaul, while other connections can remain wireless. Check this for the exact system you choose.

What do the manufacturer’s guarantee and statutory guarantee mean when buying in the Netherlands?

A limited manufacturer’s or seller’s guarantee does not replace the statutory guarantee in the Netherlands. If a product does not do what you could reasonably expect with normal use, ACM ConsuWijzer says the seller is responsible for providing an appropriate solution at no cost. There is no single fixed statutory guarantee period of two years for all products.

What rules apply to a Wi-Fi mesh system sold in the Netherlands?

The Rijksinspectie Digitale Infrastructuur describes the applicable European requirements for radio equipment and the mandatory CE marking. Check the marking on the specific version and follow the installation instructions; a product name alone does not prove compliance.