Home worker with a weak signal in the office
You make video calls from a room where your current Wi-Fi signal is weaker, and want to know whether repositioning your router or adding a small mesh system will give you enough coverage.
Start by improving the position of your existing router if poor coverage is mainly limited to one area. If several rooms still have a weak signal, a two-node mesh system could be a good fit; the Consumers’ Association says two nodes are enough for most homes. Where possible, use a wired connection between the nodes, and check the connection method and available Ethernet ports beforehand.
You make video calls from a room where your current Wi-Fi signal is weaker, and want to know whether repositioning your router or adding a small mesh system will give you enough coverage.
You work while people stream in other rooms, and want to take the connection between the Wi-Fi nodes, where they’re placed and simultaneous use into account.
You want to extend coverage without replacing your existing router unnecessarily. Check how the system connects to it and which ports are available.
Choose this if: the signal is weak mainly in one area of your compact home and you can reposition the router.
The trade-off: you won’t need any extra equipment, but moving the router won’t necessarily solve a persistent coverage problem in several rooms.
Choose this if: you can run a cable between the nodes or want a wired connection for your workspace.
The trade-off: cabling takes planning and uses available ports. Connection requirements vary depending on whether you use router or access point mode, as TP-Link explains for Deco.
Choose this if: you can’t run cables and can place a second node somewhere with a strong enough signal.
The trade-off: the nodes also use Wi-Fi to connect to each other, so placement still matters for the connection to your devices.
Choose this if: you need wireless mesh and your devices can use the bands supported by the exact model.
The trade-off: 6 GHz can only be used directly by compatible devices. An extra band won’t fix a weak internet connection or poor placement.
| What to consider | What to check before buying | Who might find this important? |
|---|---|---|
| Coverage at your workspace and where you watch screens | Check the signal at your workspace and by each screen, then see whether one extra node in a suitable intermediate position will be enough. | If my home office and the screens in other rooms are in different places, I want to find out where coverage falls short first. Around 33% of consumers prioritise coverage in these areas. |
| Streaming and working at the same time | Test the relevant devices during normal simultaneous use. If you’re considering tri-band, check which bands the exact model supports too. | When I’m on a video call while someone streams elsewhere, I want to assess the connection on the devices themselves, rather than just looking at the box. Around 27% of consumers prioritise simultaneous use. |
| A stable connection for work | Check whether you can run a cable between the nodes or to your workspace, and count how many Ethernet ports will still be free afterwards. | For my workspace, I want to know whether a cable would make the connection more practical and which ports I’ll need. Around 20% of consumers prioritise a stable home office connection. |
| Connection and ongoing features | Check the router or access point mode, and which additional management or security features are available without a subscription. | If I want to keep my provider’s router, I want to know in advance how the system connects to it and whether any features come with extra conditions. Around 20% of consumers prioritise easy setup and clear information about features. |
The number of screens doesn’t directly determine how many mesh nodes you need. Rooms, obstacles and placement all affect whether a node can provide good coverage to other rooms.
First, check the signal where you work and watch content. If suitable, start with two nodes and add more only if coverage still falls short; the Consumers’ Association recommends starting with two for most homes.
An extra node can take up unnecessary space and need to stay plugged in.
The headline speed on the packaging doesn’t tell you what speed a device will receive in your home. Your internet connection and device compatibility also play a part.
Test the devices that matter during your usual periods of simultaneous use.
For Deco, TP-Link describes different connection requirements for router mode and access point mode. If you connect it incorrectly, you may have to work out the cabling all over again.
Decide in advance which router will manage the network, map out the connections and count the ports you’ll need.
You’ll need compatible devices to use 6 GHz directly. Additional management or security features may also require a subscription.
Check the bands supported by the exact model, whether your devices are compatible and which features are available without a subscription.
Extra features may require a separate subscription, so check the terms before relying on them.
The Deco X50 and XE75 are mesh options to consider when weighing up a wired setup against a model with multiple Wi-Fi bands.
The ZenWiFi XD5 is a compact Wi-Fi 6 mesh range, available in versions with one, two or three nodes.
The FRITZ!Repeater 3000 AX could be useful if you want to extend an existing FRITZ!Box setup or need a repeater with wired connections.
The eero 6+ is a Wi-Fi 6 system for anyone who values app-based management. Versions are available with one or three devices.
These Joybuy products include mesh systems with two or more nodes, including options for wired connections and models with multiple Wi-Fi bands. Check how many nodes you need for each version and how the system connects to your existing router.
No image available
A two-node system to consider if you want to connect several rooms using mesh.
The product description mentions a wired connection between the mesh nodes. Check the connection method and the ports you’ll need for your network.
No image available
A two-node mesh system for anyone comparing multiple Wi-Fi bands for a home with several connected devices.
The product name lists tri-band, 2.4, 5 and 6 GHz, and Wi-Fi 7 (802.11be). Check that your devices support the bands you want to use.
No image available
A two-node system to consider if you want to position your mesh nodes using wired connections and the power connection is important to you.
The product name lists dual-band Wi-Fi 6 (802.11ax). The product information mentions PoE; check that your cabling and equipment are compatible.
No image available
A two-node system to consider if you want to extend coverage to several rooms and can run cabling between the nodes.
The product name lists dual-band Wi-Fi 6 (802.11ax). TP-Link describes optional Ethernet backhaul for the Deco X50; check the ports you’ll need and the connection mode.
No image available
A tri-band option to compare once you’ve checked the frequency bands supported by the exact model and whether your devices are compatible.
The product information lists 2.4, 5 and 6 GHz, and a version with three nodes. The Consumers’ Association generally recommends starting with two nodes and adding more only if coverage falls short.
Start by checking the signal where you work and watch content. The Consumers’ Association says two nodes are enough for most homes. Only add another node if coverage is still poor after you’ve tried a suitable placement.
That depends on the mesh system and the connection method you choose. TP-Link describes different cabling requirements for Deco in router mode and access point mode. Check the selected mode before connecting the nodes via Ethernet.
Test on the screen itself during your usual periods of simultaneous use. Netflix recommends a stable connection of at least 15 Mbps for 4K UHD streaming. This is a service-specific recommendation for streaming, not a speed guarantee for a mesh product.
According to the Dutch Authority for Digital Infrastructure, Wi-Fi on designated frequencies and in line with the conditions of use does not require a licence, notification or registration. Select the correct country setting during setup.
Check the CE marking and applicable product documentation for the specific version sold in the Netherlands. The Dutch Authority for Digital Infrastructure says that, since 1 August 2025, stricter digital security requirements have applied to almost all wireless devices placed on the market. Check whether they apply to the version you’re considering. Also check which features are available without a subscription.