Who is this for?

Family experiencing dropouts during study calls

If study calls regularly drop out at a particular spot at home, don’t focus only on the advertised top speed. The Dutch Consumers’ Association also highlights the position of Wi-Fi points and the connection between them.

Renter with weak coverage in a second room

If you’d prefer to keep your provider’s router and don’t want to run cables through walls, first check whether one node will be enough or whether you need two. The Dutch Consumers’ Association says the layout of your home is an important factor in making that choice.

Buyer who wants to start small

If you don’t want to buy more nodes or a newer generation of Wi-Fi than you need, consider power consumption, software updates and warranty terms too. The Dutch Consumers’ Association discusses the choice between Wi-Fi generations, while ACM ConsuWijzer provides information about warranties.

What should you look for?

First, check where coverage is lacking. Then decide between one node for a limited area and two for several rooms, and see whether it’s practical to connect the nodes with a cable.

What to consider What should you check? Who is this important for?
Connection for study calls Check the signal where you study and where an intermediate node could go. See whether it’s practical to connect the nodes with an Ethernet cable. If calls mustn’t drop out where I study, I want to know whether the node will still have a good connection to the network there. Around 36% of consumers give a reliable connection for studying top priority.
Coverage across several rooms Identify which rooms have weak coverage. Compare one node for a single room with two nodes for several rooms. If my study area is in a different room, I want good coverage without adding unnecessary devices straight away. Around 29% of consumers put coverage in a second room first.
Connecting without altering your home Check whether the model you’re considering has access point mode, and whether suitable Ethernet ports and power sockets are available. If I want to keep my provider’s router and can’t run cables around the home, the connection method and installation requirements matter. Around 21% of consumers prioritise an easy setup that requires no alterations.
Costs and management Compare the number of nodes you need, stated power consumption, software updates and warranty terms. If you want to avoid unnecessary purchases or extra management, weigh the features against how you use your home network. Around 14% of consumers put costs and management first.

Buying pitfalls

  • Buying three nodes straight away because of the stated coverage

    A manufacturer’s coverage claim can’t predict how the signal will behave in your home. The Dutch Consumers’ Association suggests one node for a studio flat or room, and two for several rooms.

    First, work out where coverage is lacking. Start with a suitable setup and then check the connection where you study. Add more nodes only if you find you need them.

    Extra nodes you don’t need take up power sockets and use electricity.

  • Putting an extra node where the signal has almost disappeared

    The extra node also needs a usable connection to the network. The Dutch Consumers’ Association notes that connecting the nodes with a network cable can help reduce interference with that connection.

    Try placing a node between the router and the study area, then check the coverage where you study. If it’s practical to run a cable, compare the results with a wired connection between the nodes.

  • Treating replacing your router and using access point mode as the same setup

    An access point can work with your existing network without you having to replace your provider’s router. For KPN SuperWifi 2, KPN requires a working KPN internet connection with a router connected.

    First decide whether you’ll keep your provider’s router. Then check the connection method, available modes and installation requirements for the model you’ve chosen.

    Choosing the wrong option could mean extra setup work or leave you with a system that won’t work with your intended connection.

Relevant brands

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range available in versions with one, two or three nodes.

  • TP-Link says each Deco X50 node has three gigabit ports. Ethernet backhaul and access point mode are supported.
  • Stated coverage areas don’t predict performance in a specific rented home. Check the exact model too: the X50-PoE is a different product.

FRITZ!

The FRITZ!Mesh Set 1600 is an option for connecting your own mesh network to an existing router.

  • FRITZ! says the Set 1600 can be connected to a router via LAN, and each node has a gigabit LAN port.
  • The five-year warranty mentioned by FRITZ! applies to this set; it doesn’t automatically apply to every product from the brand.

ASUS

The ZenWiFi BD4 is a Wi-Fi 7 mesh option with access point mode.

  • ASUS lists two 2.5G ports per node and versions with one, two or three nodes.
  • Wi-Fi 7 isn’t automatically an advantage for a study area. Check whether your devices and internet connection can make use of its features, and make sure you choose the right version.

KPN

SuperWifi is a provider-specific option for extending Wi-Fi on an existing KPN connection.

  • KPN says you can manage it through MijnKPN.
  • For SuperWifi 2, KPN requires a working KPN internet connection with a router connected. It isn’t a general solution for connections from other providers.

Mesh systems on Joybuy

This selection includes mesh systems with two nodes for households looking to extend Wi-Fi coverage to several areas. Check that the connection type and features you choose suit your existing router and the layout of your home.

TP-Link Deco X20 mesh Wi-Fi system, 2-pack

TP-Link Deco X20 (2-pack), Wi-Fi 6

An option if you want to place two mesh nodes in different parts of your home.

The product description lists Ethernet backhaul as an option.

View on Joybuy
TP-Link Deco X50-PoE mesh Wi-Fi system, 2-pack

TP-Link Deco X50-PoE (2-pack), Wi-Fi 6

An option if you’re looking for two Wi-Fi 6 mesh nodes and want to consider PoE connectivity.

The product description lists PoE, a DC-in socket and two Ethernet ports per node.

View on Joybuy
TP-Link Deco X50 mesh Wi-Fi system, 2-pack

TP-Link Deco X50 (2-pack), Wi-Fi 6

An option if you’re looking for a two-node mesh system with the option of a wired connection between the nodes.

The product description says each node has three gigabit ports and lists Ethernet backhaul as an option.

View on Joybuy
TP-Link Deco BE68 mesh Wi-Fi system, 2-pack

TP-Link Deco BE68 (2-pack), Wi-Fi 7

An option if you want two mesh nodes and are looking for both wireless and wired backhaul options.

The product description lists both backhaul options. The Dutch Consumers’ Association says Wi-Fi 6 is generally the better choice for most people, so Wi-Fi 7 isn’t automatically necessary for homework and video calls.

View on Joybuy
ASUS ZenWiFi BT8 mesh Wi-Fi system, 2-pack

ASUS ZenWiFi BT8 (2-pack), Wi-Fi 7

An option if you’re looking for two mesh nodes and already use a compatible ASUS router with AiMesh.

The product description lists AiMesh integration with compatible ASUS routers. The Dutch Consumers’ Association says Wi-Fi 6 is generally a better choice than Wi-Fi 7 for most people.

View on Joybuy

Frequently asked questions

Do I need to replace my provider’s router to use mesh Wi-Fi?

No, not always. If you want to keep your existing router, check whether the mesh system has access point mode and is compatible with your connection. ACM ConsuWijzer explains your freedom to choose a router. If you do replace your router, check your provider’s requirements and settings.

Where should I put an extra Wi-Fi node?

Put the node somewhere it can still connect properly to the network, not just where the signal drops out. Then check the coverage where you study. The Dutch Consumers’ Association suggests connecting the nodes with a network cable as one way to reduce interference with that connection.

Do I need Wi-Fi 7 for homework and video calls?

Not necessarily. According to the Dutch Consumers’ Association’s buying advice, Wi-Fi 6 is generally the better choice for most people. Also consider where you place the nodes and what your devices and internet connection can support.

What should I consider when it comes to power consumption, updates and warranties?

Compare the stated power consumption for the number of nodes you need, and check how software updates are provided. In the Netherlands, statutory guarantees may apply alongside any manufacturer’s warranty. ACM ConsuWijzer explains that there is no fixed, general two-year period.

Can I use my own mesh router in the Netherlands?

ACM ConsuWijzer confirms that you’re free to choose your router, but your chosen equipment must meet the relevant requirements, and a provider can refuse an unsafe device. Radio equipment sold in Europe must meet European product requirements and carry a CE mark. This general requirement doesn’t confirm that any individual device complies.