Who is this setup for?

People with an unreliable lounge screen connection

If you mainly need a stable connection where the shared screen is permanently positioned, consider the distance and obstacles between the router, mesh nodes and screen. The Consumers’ Association and TP-Link point out that obstacles and placement affect reception.

People who can run a cable

If you can connect a node in the lounge by cable, you can avoid a wireless connection between mesh nodes. Check that the specific system supports ethernet backhaul; TP-Link and ASUS describe this connection option for certain systems.

People keeping their existing modem

If you want to keep your existing router functions, it’s worth checking the operating mode and installation instructions for your chosen mesh system. TP-Link describes an access point mode for Deco alongside an existing router; KPN describes SuperWifi as an extension to an existing KPN home network.

What should you look for when choosing?

First, assess where you could place the nodes and whether there’s a cable route to the lounge. Then check the ports and how the system works with your existing modem or router.

What to consider What to look for when buying Who is this important for?
Connection at the screen Test reception where the screen is positioned and at possible locations for a mesh node. Check whether the screen uses Wi-Fi or ethernet. If the screen is in a fixed position, I want to know whether a node can work both there and near the previous node. Around 33% of consumers prioritise the connection at the screen.
Connection between mesh nodes Check whether the specific system supports ethernet backhaul and whether you can run a cable. Otherwise, assess reception at each intended location. If the narrow hallway makes the wireless connection difficult, I want to know whether the nodes can be connected by cable. Around 33% of consumers give the connection between nodes top priority.
Existing modem and ports Check the installation instructions and operating mode. Count the ports for the modem, backhaul and screen separately. If I want to keep my existing modem or router, I want to know how the mesh system will work with it and which port will be available for the screen. Around 25% of consumers prioritise connecting to their existing network.
Total purchase and running costs Compare the number of nodes you need and any cabling required. Also check the energy consumption and warranty terms for the specific system. If I want to keep purchase and running costs down, I don’t want to choose an extra node until I know where it can work effectively. Around 9% of consumers prioritise total costs.

Common buying mistakes

  • Putting a mesh node where reception is worst

    A node needs a usable connection to the network itself. Placing it where the signal is weakest won’t automatically improve the connection at the screen.

    Test clear spots on either side of the hallway and check the connection at the intended location. Consider ethernet backhaul if the wireless connection doesn’t work there.

  • Confusing an ethernet port for the screen with wired backhaul

    You can connect the screen to a mesh node by cable while that node still communicates wirelessly with the rest of the network.

    Map out the connections for each node and count the ports for the modem, backhaul and screen separately.

    If there isn’t a port left over, your chosen setup may require an extra cable or switch.

  • Assuming a different pack size or PoE version is the same product

    Products in the same model range may differ in the number of nodes, connections or power supply.

    Compare the full model name, version and box contents before choosing a system.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system; the Deco X50-PoE is a separate version with different mounting and connection options.

  • TP-Link lists three gigabit ports per unit and optional ethernet backhaul for the standard Deco X50. This can help when planning a connection for the screen.
  • A stated range or combined Wi-Fi speed doesn’t predict how the system will perform in a particular hallway. Don’t treat the X50-PoE as the same version as the X50.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 option to consider if you need features such as 2.5-gigabit ports on each node.

  • ASUS lists wired backhaul and two 2.5-gigabit ports per node for the BD4.
  • These specifications don’t measure coverage in a narrow hallway; assess reception and available connections at the locations you can use.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Set 1700 comprises two or three repeaters that can be used with an existing router.

  • FRITZ! describes connecting the set to an existing router via LAN.
  • If your screen uses ethernet, check which port will remain available after connecting the relevant repeater. The connection described doesn’t tell you how reception will be in your hallway.

KPN

SuperWifi nodes are worth considering if you want to extend an existing KPN home network.

  • KPN describes installation, placement guidance and management through MijnKPN.
  • Check your existing equipment and the specific version; the described features won’t necessarily apply to a node used with another provider.

Joybuy products for mesh Wi-Fi

These products are mesh Wi-Fi systems for a setup where you coordinate the placement of the nodes, the connection between them and the screen connection.

TP-Link Deco BE68 mesh Wi-Fi system, 2-pack

TP-Link Deco BE68 (2-pack)

An option to consider if you want to use ethernet backhaul and a wired connection for the screen.

The description lists three WAN/LAN ports per unit and support for wired backhaul.

View at Joybuy
TP-Link Deco E4 mesh Wi-Fi system, 3-pack

TP-Link Deco E4 (3-pack)

A set of three mesh units to consider if you need several potential placement options.

The system is dual-band and has ethernet ports with a stated maximum speed of 100 Mbps. Bear this in mind if your screen needs a higher ethernet throughput.

View at Joybuy
ASUS ZenWiFi BT8 tri-band mesh Wi-Fi system, 2-pack

ASUS ZenWiFi BT8 (2-pack)

A mesh system to consider if you’re looking for a tri-band version with ethernet ports.

The product name lists Wi-Fi 7 (802.11be) and tri-band Wi-Fi (2.4 GHz/5 GHz/6 GHz). The number of ethernet ports isn’t specified here.

View at Joybuy
ASUS ZenWiFi BD4 dual-band mesh Wi-Fi system

ASUS ZenWiFi BD4 Dual-Band

An option to consider if you want to combine ethernet backhaul with a wired connection for the screen.

The specifications list two 2.5-gigabit ethernet ports and support for wired backhaul.

View at Joybuy
TP-Link Deco M4 dual-band mesh Wi-Fi system, 3-pack

TP-Link Deco M4 (3-pack)

A set of three stations to consider if you want to explore several potential placement options.

The system is dual-band and the description lists two ethernet ports.

View at Joybuy

Frequently asked questions

Does the second mesh node have to go right in the narrow hallway?

No. Choose a clear spot where the node can stay connected to the previous node while also providing coverage for the screen. Test reception there; walls, obstacles and interference affect the actual connection. With a wired connection, wireless reception between the nodes isn’t a requirement.

Can I install mesh alongside my existing router?

You can with TP-Link Deco using the right operating mode. TP-Link describes access point mode for situations where your existing router continues to manage network functions. Follow the connection sequence for your chosen system; connecting Deco incorrectly in router mode can create a network loop.

Do I need Wi-Fi 7 to connect the shared screen?

Not just because of the version number. The Consumers’ Association points out that the Wi-Fi version alone doesn’t determine performance. For this screen, first assess the placement, the connection between nodes and the available ports.

Which running costs and warranty terms should I check?

Compare the number of nodes that will be switched on all the time and the energy consumption of the specific system. In the Netherlands, statutory warranty is separate from any manufacturer’s warranty. According to ACM ConsuWijzer, if a product breaks sooner than you could reasonably expect under normal use, the seller must put it right free of charge.

Do I need a licence for Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi for a home network doesn’t require a licence if you use the designated frequencies and comply with the terms of use. Radio equipment sold in the Netherlands must meet European product requirements, including CE marking. Check the marking on the specific version and set the correct country settings.