Watching films with weak Wi-Fi by the TV
You want to check whether the connection where you watch is stable enough for the picture quality you want before buying extra equipment.
First, check the connection by your TV: mesh won’t fix a slow internet connection, and where you place the nodes affects Wi-Fi coverage. Choose wireless mesh if the nodes can maintain a connection with one another; consider Ethernet backhaul if you have cabling, or compatible powerline mesh if walls are disrupting the wireless connection. Don’t automatically start with three nodes: the number you need depends on your home and the connection where you watch.
You want to check whether the connection where you watch is stable enough for the picture quality you want before buying extra equipment.
You have little suitable space for an intermediate node, or you’ve noticed that walls disrupt the connection between mesh nodes. In that case, where you place them and how they connect are important considerations.
You can connect a mesh node by cable near your viewing area and want to know which kit and router mode will work for you.
Choose this if: you have a suitable spot between the router and your viewing area, but no network cable between the nodes.
Bear in mind: walls, placement and other environmental factors can affect the connection between nodes.
Choose this if: there’s a suitable network cable, or one can be installed, to a spot near your viewing area.
Bear in mind: the cable route, available ports and connection to your existing router.
Choose this if: running a cable is difficult and obstacles disrupt the wireless connection; for example, compare a kit with PX50 nodes.
Bear in mind: choosing compatible models and checking that your home’s electrical wiring is suitable.
Choose this if: you want to compare wireless kits where the connection between the router and satellites is an important factor.
Bear in mind: an extra Wi-Fi band won’t overcome a poor location or obstacles.
| What to consider | What should you check? | Who should pay particular attention to this? |
|---|---|---|
| Connection where you watch | Work out where the nodes could go, then test the connection by the TV after installation. | If I want to know whether a film will play smoothly where I watch, I check the connection there rather than relying only on a quoted range; around 36% of consumers prioritise coverage where they watch. |
| Connection between the nodes | Check whether the kit supports Ethernet or powerline backhaul, and whether that setup will work in your home. | If walls or the hallway could disrupt the connection between nodes, I want to know which setup is possible in my home; around 29% of consumers prioritise the connection between nodes. |
| Speed for the picture quality you want | Test the connection by the TV and compare the speed with the recommendation from your streaming service. | If I want to stream at a particular picture quality, I first check whether the connection is suitable at my playback device; around 21% of consumers focus mainly on picture quality and playback speed. |
| Number of nodes and power consumption | Choose the right number of nodes and check the energy use and features of the exact model. | If I don’t want to install and power more devices than necessary, I compare the number of nodes and their usage; around 14% of consumers pay most attention to this. |
The speed of the connection used by your stream is different from a Wi-Fi specification or coverage claim. Actual coverage can vary due to factors such as walls and where you place the nodes.
Test the connection at your playback device and try the mesh nodes in their final positions. Netflix recommends at least 5 Mbps for 1080p and 15 Mbps for 4K on its service.
An extra node won’t necessarily help if it can’t get a usable connection to the rest of the system. More nodes also mean more devices to position and power.
First, work out where the nodes can go. If wireless placement doesn’t work, compare a compatible wired or powerline connection.
Powerline doesn’t work with every other Deco powerline variant. Model versions may also differ, as can the power supply or cabling required.
Before buying, check the full model name, hardware version, power supply and connection options. TP-Link says that the PX50’s powerline backhaul isn’t compatible with that of the Deco PX10, P7 or P9.
Deco models offer different ways to connect or position mesh nodes.
ZenWiFi XD5 is a Wi-Fi 6 mesh option to compare if Ethernet backhaul or choosing your network names matters to you.
Mesh Wi-Fi Set 4200 is a tri-band option to compare if you want to connect a kit to an existing router.
Orbi RBK763S is a tri-band option to compare if the wireless connection between the router and satellites is an important factor.
These options are for anyone comparing mesh nodes for a viewing area reached via a hallway. Check the CE mark and accompanying conformity information for the exact model; the Dutch Authority for Digital Infrastructure outlines the applicable requirements for radio equipment.
Image unavailable
Worth considering if you’re looking for a mesh kit with two nodes for a home with a tricky route to your viewing area.
2-pack.
Image unavailable
A two-node tri-band kit to compare if you’re looking at several options for a wireless mesh connection.
Tri-band: 2.4, 5 and 6 GHz; Wi-Fi 7 (802.11be).
Image unavailable
Worth comparing if you’re looking for a two-node mesh kit and can use a wired connection between the nodes.
AX1800; Wi-Fi 6; 2-pack.
Image unavailable
Worth considering if you want to compare Ethernet backhaul and three nodes suit the areas you want to cover.
Dual-band: 2.4 and 5 GHz; Wi-Fi 6 (802.11ax); optional Ethernet backhaul.
Image unavailable
A two-node tri-band kit to compare with other mesh options if you want to weigh up the possible connections between nodes.
Tri-band: 2.4, 5 and 6 GHz; Wi-Fi 7 (802.11be).
First, check the speed and connection by the TV and compare them with your streaming service’s requirements. Netflix recommends at least 5 Mbps for 1080p and 15 Mbps for 4K on its service; those recommendations don’t mean mesh will fix a slow internet connection.
Not necessarily. Choose a spot where the node can maintain a connection to both the router and your viewing area, then test it there. If that doesn’t work, compare a supported wired connection or powerline backhaul that’s compatible with your chosen kit.
You can with Deco in access point mode, as described by TP-Link. If you want your existing router to manage the network, check the connection instructions for the mode you’ve chosen to avoid creating a network loop.
Check the energy use of the number of nodes you need, and find out which management or security features are included with the exact model and which may cost extra. The Consumers’ Association includes energy use in its tests.
According to the Dutch Authority for Digital Infrastructure, Wi-Fi use on licence-exempt frequencies does not require notification or registration. This doesn’t guarantee a disruption-free connection; when buying, also check the CE mark and conformity information for the exact radio equipment model.