Who is this guide for?

Viewers with weak Wi-Fi beyond the hallway

You want to watch a recording somewhere that distance, walls or a turn in the hallway may limit the signal. For wireless pods, Ziggo recommends choosing a spot where the Wi-Fi signal is still strong.

Viewers who can run a cable

You want to place a Wi-Fi node closer to where you watch without relying on Wi-Fi for the connection between nodes. Ziggo explains how to connect pods by cable, while eero describes Ethernet backhaul for compatible models.

People with limited space for placement

You need a spot in or near the narrow hallway where a node, cable and power supply won’t get in the way. TP-Link specifically describes wall and ceiling mounting for the Deco X50-PoE.

What should you consider when choosing?

Start by testing the Wi-Fi where you watch and at possible locations along the hallway. Then choose between a wireless connection, a cable route or adjusting your existing setup.

What to consider What should you check? Who is this important for?
Signal through the hallway Test the Wi-Fi where you watch and at possible intermediate locations. Place a wireless node where the existing signal is still strong. If I want to watch beyond the hallway, I need to know whether the signal reaches both that spot and the route to it. Around 36% of consumers prioritise signal through the hallway.
Playback where you watch Test with the device you plan to use for playback, and find out whether the recording will be streamed online or played locally. If I want to watch without interruptions, I need to assess the connection to my playback device in that spot. Around 29% of consumers give uninterrupted playback top priority.
Placement and cable route Check the available space, sockets and cable route. See whether wall or ceiling mounting and the right power supply are suitable for the model. Because the passage is narrow, I need a solution that fits physically and doesn’t leave awkward cables or devices in the way. Around 21% of consumers prioritise placement and keeping the passage clear.
Cost, management and connection Check how the system is managed and whether your provider has any requirements for equipment. Find out whether you can run a cable to a node. I don’t want to buy more equipment, cabling or management features than my situation calls for. Around 14% of consumers give cost and easy management top priority.

Common pitfalls

  • Putting a wireless node where the Wi-Fi is already weak

    An extra mesh node still needs a usable connection to the rest of the network. A node placed where there’s no strong incoming signal may not solve the coverage problem.

    First, find a spot where the Wi-Fi is still strong, then check whether a cable would let you place the node somewhere more suitable.

    You may find that an extra node or cable route wasn’t needed after all.

  • Assuming the stated coverage guarantees a good signal in your hallway

    Your home’s shape, walls, floors and layout all affect coverage. A maximum coverage figure doesn’t automatically predict the connection where you watch.

    Test possible locations in your home rather than relying only on the stated coverage.

  • Treating the Deco X50 and Deco X50-PoE as the same model

    TP-Link lists PoE and wall or ceiling mounting for the X50-PoE. These features don’t automatically apply to the standard Deco X50.

    Check the full model name, what’s included, hardware version, power supply and mounting options before choosing.

Relevant brands to compare

The features listed apply to the specified product ranges and models. They don’t, on their own, indicate which system will give you the best coverage at home.

TP-Link

The Deco X50 for a typical mesh setup; the Deco X50-PoE if wall or ceiling mounting and PoE are relevant to you.

  • TP-Link lists optional Ethernet backhaul and three Gigabit ports per node for the Deco X50.
  • Wall and ceiling mounting and PoE are listed for the separate X50-PoE model. Don’t confuse the two.

ASUS

The ZenWiFi XD5 lets you compare features including router and access point modes within a mesh system.

  • ASUS lists both modes and two Gigabit ports for the specified XD5 model.
  • These specifications apply to that model and don’t automatically tell you how to configure the system with your modem.

eero

A mesh range to compare if you’re considering both wireless and wired connections between nodes.

  • eero describes Ethernet backhaul for compatible eero models.
  • According to eero, Beacon and eero 6 Extender don’t have Ethernet ports, so this feature isn’t available on every product in the range.

Ziggo

SmartWifi Pods offer a provider-specific option for a compatible Ziggo setup.

  • Ziggo explains how to place pods with or without a cable and manage them through SmartWifi.
  • Ziggo’s placement advice for a wireless pod is an installation recommendation, not a measurement of performance in your home.

KPN

SuperWifi offers a provider-specific option if you already have a compatible KPN setup.

  • KPN explains how to install and manage the system through MijnKPN.
  • According to KPN, rented SuperWifi nodes only work with KPN Internet.

Mesh products at Joybuy

This selection includes mesh systems for using Wi-Fi in several places around your home. For each model, check that the number of units, any wired connection and placement options suit your hallway and modem setup.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

An option to consider if you want to cover several locations and are thinking about a wired connection between mesh nodes.

Set of 2 mesh nodes.

Joybuy
TP-Link Deco E4 mesh system, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5

An option if you want to compare systems with several mesh nodes and potentially connect devices by cable.

3-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 5 (802.11ac).

Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

An option to compare if you want to factor a wired connection between mesh nodes into your decision.

Dual-band (2.4 GHz/5 GHz); Wi-Fi 7 (802.11be).

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System (2-pack)

An option if you want to compare a two-node mesh system with the option of a wired connection.

AX1800; Wi-Fi 6; set of 2.

Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

An option if you want to compare systems with several mesh nodes and connect wired devices too.

3-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax).

Joybuy

Frequently asked questions

Does a wireless mesh node need to be in the room with the TV?

Not necessarily. First, place a wirelessly connected node where the existing signal is still strong, then test the connection where you watch. With a suitable wired connection, you can place a node somewhere with little or no existing Wi-Fi signal.

Will Wi-Fi 7 automatically make a theatre recording play more smoothly?

No. The Wi-Fi version alone doesn’t tell you how a device will perform in a particular home. Consumentenbond’s buying advice says that Wi-Fi 6 is generally a good-value choice for most people. First, test the connection where you watch.

Can I use my own mesh router instead of my provider’s router?

In the Netherlands, you’re free to choose your own router, but the connection depends on your setup and equipment. ACM ConsuWijzer cites security as one reason a provider may refuse to support a customer-owned device. Connecting a mesh system behind your existing modem-router is different from replacing the modem itself.

Do I need a permit or registration to use Wi-Fi at home?

In the Netherlands, the Wi-Fi frequencies described by the Dutch Authority for Digital Infrastructure can be used without a permit, notification or registration. This is separate from the product requirements for radio equipment.

What should I consider when it comes to management and provider-specific equipment?

Before buying, check how you manage the model you’ve chosen and whether your provider has any requirements for using it. For example, KPN says that rented SuperWifi nodes only work with KPN Internet. Keep any router you connect yourself up to date too, as ACM ConsuWijzer recommends.