Who can benefit from mesh Wi-Fi in a narrow hallway?

Viewers with a weak signal beyond the hallway

If your stream mainly buffers in the room beyond the hallway, look for a spot where the extra Wi-Fi node can get a good signal from both the router and your TV. TP-Link recommends checking the connection between Deco nodes as you position them.

Viewers who can run an Ethernet cable

A cable between the Wi-Fi nodes may be useful if you don't want the connection to rely on the wireless signal in the hallway. Check whether you can run a cable or use existing Ethernet ports; TP-Link and ASUS describe wired backhaul for their respective systems.

Owners of an existing mesh system

If your current network is otherwise working well, first check whether you can add a compatible node rather than replacing the router and the whole system. FRITZ! describes the FRITZ!Repeater 3000 AX as an extension for a compatible FRITZ! network.

Which buying choices matter?

First, check how the signal travels between the nodes. Then decide where you can safely place the extra node, and finally check that it’s compatible with your existing network.

Consideration What should you check? Who is this important for?
Coverage beyond the hallway Check whether you can place the extra node in an open spot, out of the way, and, for wireless backhaul, check the connection quality to the main node. If my stream buffers in the room beyond the hallway, I want to find a spot where the extra node can still maintain a good connection to the router. Around 40% of consumers prioritise reliable coverage above all else.
Stable streaming Check whether the exact model supports Ethernet backhaul and test the connection on your streaming device. Netflix recommends 5 Mbps for FHD and 15 Mbps for 4K UHD for a stable stream. When I want to watch without buffering, I focus on the connection between the Wi-Fi nodes and the speed at my TV or streaming device. Around 31% of consumers put streaming stability first.
Keeping the walkway clear Check the dimensions, power supply and mounting options for the exact model; according to TP-Link, the Deco X50-PoE can be placed on a table or mounted on a wall or ceiling. With a narrow hallway, I want to choose a spot that keeps the walkway clear, without assuming in advance that mounting is possible in my home. Around 15% of consumers prioritise practical placement above all else.
Keeping your existing router Make a note of your router’s make and model, then check that the node you’re considering supports the required mesh connection or network mode. If my current network still meets my needs, I want to know whether a compatible extra node will be enough before I replace everything. Around 14% of consumers prioritise keeping their existing equipment.

Common buying mistakes

  • Putting the satellite node where the signal is weakest

    With wireless backhaul, the satellite node also needs a good connection to the main node. So a spot at the far end of the hallway may not be suitable.

    Check the connection between the nodes as you position them and, if necessary, try moving the node closer to the main one.

    You may find that you need an extra node or an Ethernet cable after all.

  • Assuming the advertised range or Wi-Fi speed is the speed you’ll get on your TV

    Your home’s layout, walls and node placement all affect coverage. The advertised coverage or wireless speed won’t automatically tell you what speed you’ll get on your streaming device.

    Test the connection where you watch and don’t compare product claims with a measurement taken in your own home.

  • Mistaking a standalone repeater for a complete mesh system

    The FRITZ!Repeater 3000 AX is an extension, not a complete system with a main router. The mesh features available to you depend on your existing network.

    Check your router’s model and work out whether you need an extension or a complete system.

  • Assuming a feature on a different version is available on the model you’ve chosen

    Specifications can vary between versions. The official ASUS specification for the ZenWiFi XD5 lists AiProtection Classic.

    Check the official specifications for the exact model to confirm any features that will influence your choice, and ask for clarification if the product information conflicts with them.

Brands to compare

TP-Link

Deco X50 offers Wi-Fi 6 mesh systems with wireless or Ethernet backhaul. The separate X50-PoE version may be suitable if you want wall or ceiling mounting and have an appropriate PoE setup.

  • TP-Link lists Ethernet backhaul for Deco X50 and table, wall and ceiling placement for X50-PoE.
  • The manufacturer’s range and speed figures aren’t measurements taken in your home. X50 and X50-PoE are different versions.

ASUS

ZenWiFi XD5 is a Wi-Fi 6 mesh option if Ethernet backhaul or access point mode is relevant to your network setup.

  • ASUS lists Ethernet backhaul and access point mode for the XD5.
  • The official specification for the XD5 lists AiProtection Classic. Check the exact version if a specific feature will determine your choice.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you want to extend a compatible existing FRITZ! network.

  • According to FRITZ!, this model can connect to a FRITZ!Box via LAN and has two gigabit LAN ports.
  • It isn’t a complete mesh system with a main router. Check your existing router and the network features you need.

NETGEAR

Orbi 770 is a tri-band Wi-Fi 7 mesh option for households with more demanding network needs alongside streaming documentaries.

  • NETGEAR lists features for Orbi 770 including a wired backhaul option and 2.5-gigabit ports.
  • These model specifications don’t prove that the system will perform better in a particular hallway; a higher Wi-Fi class won’t automatically fix poor placement.

Mesh Wi-Fi products at Joybuy

This selection includes mesh systems for connecting your router to your viewing area, with options for wired backhaul, multiple Wi-Fi nodes and PoE installation. Before buying, check the CE marking on the version you’ve chosen and whether the product is intended for the Dutch market.

TP-Link Deco BE68 2-pack mesh system

TP-Link Deco BE68 (2-pack)

An option if you’re looking for a mesh system with two units and wired or wireless backhaul.

The product information lists Wi-Fi 7, tri-band, MLO and multi-gigabit WAN/LAN ports.

Joybuy
TP-Link Deco X20 mesh system, 2-pack

TP-Link Deco X20 (2-pack)

This system may suit you if you want to connect two mesh units and can use Ethernet backhaul.

The product information lists Wi-Fi 6 and Ethernet backhaul.

Joybuy
TP-Link Deco X50 dual-band mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A three-node system for trying out possible locations around your home; you won’t necessarily need three units without first testing your home.

The product information lists dual-band, Wi-Fi 6, optional Ethernet backhaul and three gigabit ports per unit.

Joybuy
TP-Link Deco X50-PoE dual-band mesh system, 3-pack

TP-Link Deco X50-PoE (3-pack)

An option if three mesh nodes and power from a suitable PoE setup work for your chosen locations.

The product information lists dual-band, Wi-Fi 6, PoE support and two Ethernet ports per unit. PoE requires a suitable setup; also check that wall or ceiling mounting will work with your installation.

Joybuy
TP-Link Deco X50 dual-band mesh system, 2-pack

TP-Link Deco X50 (2-pack)

This two-node system may suit you if you can use Ethernet backhaul between the units.

The product information lists Wi-Fi 6, optional Ethernet backhaul and three gigabit ports per unit.

Joybuy

Frequently asked questions

Does the extra mesh node have to go at the end of the hallway?

No, not necessarily: with a wireless connection, the node also needs to maintain a good connection to the main node. Try an open spot near the hallway and check the connection quality; TP-Link describes this check for Deco.

How can you check whether mesh can help with your documentary buffering?

First, test the connection on your streaming device. Netflix recommends at least 5 Mbps for FHD and 15 Mbps for 4K UHD for a stable stream; an extra Wi-Fi node won’t automatically fix a slow internet connection.

Can you keep your existing router?

That depends on the system you choose and its network mode. ASUS lists access point mode for the ZenWiFi XD5, while FRITZ! describes the FRITZ!Repeater 3000 AX as an extension via Wi-Fi or LAN; check your router’s manual and the system you’ve chosen.

Do you need wired backhaul for streaming in a narrow hallway?

Not always: wired backhaul is an option if you have a suitable route for a cable or Ethernet ports. Without a cable, the extra node needs to be in a spot where it can still get a good wireless connection to the main node; check this during setup.

Does mesh Wi-Fi for the Dutch market need a CE marking?

Yes. The Dutch Authority for Digital Infrastructure states that equipment must bear the required CE marking when it meets the applicable European requirements for radio equipment. Check the marking and whether the version is intended for the Dutch market.