Who should consider mesh Wi-Fi?

Sharing with multiple viewers outside the home

First, you want to know whether your upload connection and media server can handle several external video streams at once. Mesh Wi-Fi comes into the picture only after that.

Living with a server away from the router

Your video library is in another room or on another floor, and you’re weighing up a cable against a wireless connection between the Wi-Fi nodes.

Using an existing ISP router

You want to keep your current router while taking your home network setup and remote access into account.

What should you look for?

First, work out whether the bottleneck is your internet upload speed or media server, the connection inside your home, or your router configuration. Then compare the mesh features.

What to consider What should you check? Who should consider this?
Watching remotely at the same time Measure the upload speed where the server is located and compare it with the combined stream settings. Also check whether the media server can transcode if needed. If several people watch remotely at the same time, I want to know whether the connection and server can handle it before choosing mesh. Around 36% of consumers prioritise enough capacity for simultaneous streams.
Connection inside the home Map out the server, viewing locations, existing cables and required ports. Check whether Ethernet backhaul is supported on the specific model. If my server is on another floor or far from the router, I want to know how the mesh nodes connect to each other and to the server. Around 29% of consumers prioritise the connection inside the home.
Existing router and remote access Check the router and access point modes of the exact system, and work out which device handles routing and remote access. If I want to keep my ISP router, I want to extend Wi-Fi without making access to my media server more complicated. Around 21% of consumers prioritise router integration and remote access.
Hardware and running costs Check how many nodes and connections you need, which accessories are included, and what requirements your media software has. If I don’t want to buy nodes or features my setup doesn’t need, I first compare the specific requirements of my network and software. Around 14% of consumers prioritise the total purchase and running costs.

Which buying mistakes can you avoid?

  • Assuming the Wi-Fi speed on the box is your available upload speed

    Remote streams use the upload speed where the server is located; transcoding can also put a strain on the media server. A faster mesh system won’t overcome these limitations.

    Check your upload speed and simultaneous stream settings before comparing Wi-Fi specifications.

  • Treating the Deco X50 and Deco X50-PoE as the same model

    The X50-PoE is a separate model. The model name, ports and power supply can all affect the setup you need.

    Compare the full model name, hardware version, connections and box contents for each listing.

  • Assuming an extra node will fix every weak signal

    A mesh node placed where the connection is already weak won’t necessarily connect well to the other nodes. A tri-band label alone doesn’t guarantee a particular speed in your home.

    Test the locations you have in mind and, where possible, compare Ethernet backhaul with a wireless connection between the nodes.

    Depending on your home, you may still need cabling or an extra mesh node.

  • Blaming the router for every remote viewing problem

    Mesh won’t replace your server settings or the access requirements of your media software. With Plex, router configuration, double NAT and remote playback requirements can all play a part.

    Check the settings and requirements of your media software separately from your choice of mesh system. Don’t assume Plex-specific requirements apply to other services.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 system with optional Ethernet backhaul, suited to homes where you can run cables.

  • TP-Link lists router and access point modes for the Deco X50.
  • The claimed combined radio speed isn’t a measured speed for simultaneous remote viewing. Check the hardware version and ports of the system on offer; the X50-PoE is a separate model.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 option to compare if the connection between nodes will be wireless.

  • According to ASUS’s Netherlands specifications, the XT9 has router and access point modes, one 2.5G WAN port and three Gigabit LAN ports.
  • These are the XT9’s connections and features, not proof that it can handle more video streams. ASUS notes that 160 MHz on 5 GHz may not be available in some regions.

NETGEAR

The Orbi 770 RBE772 is a tri-band Wi-Fi 7 system to compare if 2.5G connections matter for the rest of your network.

  • NETGEAR lists 2.5G wired backhaul as a possible option.
  • The stated Wi-Fi and coverage figures are manufacturer claims. They don’t tell you how much internet upload speed is available or what coverage you’ll get in your home.

FRITZ!

The FRITZ!Repeater 3000 AX is an option for extending an existing network, not automatically a replacement for your router setup.

  • FRITZ! lists three Wi-Fi bands, two Gigabit LAN connections and LAN access point mode behind a router from another brand.
  • Check which mesh features your existing router actually supports.

Mesh Wi-Fi options at Joybuy

These Joybuy products are mesh systems for home Wi-Fi. For each model, check that the number of nodes, connections and wired options suit the location of your server and your cabling.

TP-Link Deco BE68 2-pack mesh system

TP-Link Deco BE68 (2-pack)

A mesh system with two nodes to compare if you need several mesh nodes or wired connections.

Tri-band Wi-Fi 7. The product description lists 10, 2.5 and 1 Gbps WAN/LAN ports, plus wired or wireless backhaul.

View at Joybuy
ASUS ZenWiFi BT8 mesh system with two units

ASUS ZenWiFi BT8 (2-pack)

A mesh system with two units to compare if you want to extend your Wi-Fi and AiMesh compatibility with an ASUS router matters to you.

Tri-band Wi-Fi 7 with 2.4, 5 and 6 GHz bands. The product description mentions AiMesh with compatible ASUS routers.

View at Joybuy
TP-Link Deco X50 mesh system with three units

TP-Link Deco X50 (3-pack)

A set of three mesh nodes to compare if you want to connect several areas of your home or connect devices by cable.

Dual-band Wi-Fi 6. The product description lists Ethernet ports on each unit and optional Ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro mesh system with three units

TP-Link Deco XE75 Pro (3-pack)

A set of three mesh nodes to compare if you want to connect several areas of your home and need Ethernet connections.

Tri-band Wi-Fi 6E. The product description lists Ethernet ports on each unit.

View at Joybuy
TP-Link Deco X50-PoE mesh system with three units

TP-Link Deco X50-PoE (3-pack)

A set of three mesh nodes to compare if PoE power and wired connections suit your setup.

Dual-band Wi-Fi 6 with PoE support and two Ethernet ports per unit, according to the product description.

View at Joybuy

Frequently asked questions

Can mesh Wi-Fi support multiple video streams for viewers outside the home?

Mesh can improve your connection inside the home, but it won’t increase your internet upload speed. For simultaneous external streams, Plex recommends keeping the combined stream bitrate below the available upload speed. Also check whether your media server can transcode if needed.

Why can’t I watch from outside the home when my home Wi-Fi is working well?

A good Wi-Fi connection at home doesn’t guarantee that remote access will work. Plex lists router configuration and a double NAT setup among the possible issues; a Plex Relay connection is limited to a maximum of 2 Mbps per stream. These requirements apply to Plex and not automatically to other media servers.

Do I have to pay to watch my own videos remotely with Plex?

For the affected Plex apps, since 29 April 2025, remote playback of personal videos requires either an active Plex Pass for the server admin or a Plex Pass or Remote Watch Pass for the viewing account. According to Plex, the server admin’s Plex Pass also covers other users of that server. Check whether this applies to the app you use; it’s not a general requirement for mesh Wi-Fi or other media software.

Can I share every film in my home library online with other people?

No, not without the necessary rights or permission. The Dutch government states that a private copy of copyright-protected material for personal use must not be distributed or made available to the public. A mesh system doesn’t change the rights to your files.

What device requirements apply to mesh Wi-Fi in the Netherlands?

Radio equipment newly placed on the European market must meet the applicable RED requirements; the manufacturer applies the CE marking once all relevant requirements have been met. According to the Dutch Authority for Digital Infrastructure, applicable cybersecurity requirements have also been part of these requirements since 1 August 2025. Check the specific model you’re considering.