Who is mesh Wi-Fi suitable for?

Viewers on multiple floors

You want good coverage on the floor where you watch, and need to work out how many nodes you need and where to place them.

Viewers with Ethernet cables

You can connect the floors using cables and are looking for nodes that support Ethernet backhaul, possibly with a port for your viewing device.

Viewers without Ethernet cables

You have to rely on a wireless connection between the nodes and want to check that it remains strong enough through the floors.

What should you look for when choosing?

Mesh with Ethernet backhaul

Choose this option: if you can run an Ethernet cable between floors and don’t want the connection between nodes to depend on Wi-Fi passing through floors.

Bear in mind: using or installing cables takes some work; check that the exact model supports Ethernet backhaul.

Fully wireless mesh

Choose this option: if there’s no usable Ethernet cable and you can position the nodes so they have a strong connection to each other.

Bear in mind: floors and other obstacles can weaken the connection between nodes; the Consumers’ Association recommends checking this connection with the nodes in their intended positions.

Move your router or use an access point

Consider this: if reception is particularly poor where your router is currently located, or if there’s already a cable running to your viewing area.

Bear in mind: an access point doesn’t automatically offer the same unified management as a mesh system; also check whether you can move your provider’s router.

What to consider What should you check? Who is this important for?
Coverage and placement Choose the number of nodes to suit your home, and check reception where you watch and the connection between the nodes. If I watch upstairs, I want to know whether the signal reaches that floor and whether the node itself stays well connected. Around 33% of consumers prioritise coverage on the floor where they watch.
Connection between nodes Check whether the exact model supports Ethernet backhaul; for a wireless connection, choose a position where the nodes have a strong signal between them. If I can cable the floors, I don’t want the connection between nodes to depend on Wi-Fi passing through floors. Around 33% of consumers give this connection top priority.
Cause of interruptions Test the connection next to the router and where you watch; distinguish between streaming over the internet and playing recordings stored locally. If my theatre recording keeps buffering, I first want to know whether the cause is the internet, Wi-Fi or the playback device. Around 17% of consumers want to identify the cause first.
Compatibility and use Check the router mode and connections required, along with any additional equipment; also check that the version on offer carries the CE mark. If I want to keep using my existing router and equipment, I want to know whether the system is compatible and what extra components I’ll need. Around 17% of consumers prioritise compatibility and the total cost of use.

Floors, walls and the position of the nodes all affect the Wi-Fi signal. The Consumers’ Association recommends placing mesh nodes where they can connect well to each other and, ideally, no more than two rooms apart. The Dutch Authority for Digital Infrastructure says that Wi-Fi equipment sold in Europe must carry a CE mark.

If you stream via Netflix, Netflix recommends a stable download speed of 5 Mbps for 1080p and 15 Mbps for 4K. These aren’t general requirements for locally stored recordings or other streaming services.

Common buying mistakes

  • Assuming the stated range guarantees coverage in your home

    Reception across multiple floors also depends on floors, other obstacles and where you position the nodes. Adding another node won’t automatically help if it has a weak connection itself.

    Plan possible positions on each floor and check the connection for every node during setup.

  • Buying a newer Wi-Fi generation to fix an internet problem

    A mesh system won’t fix an unreliable internet connection outside your home network. And if a recording is stored locally, recommended internet speeds for streaming aren’t the right measure anyway.

    Test the connection next to the router and where you watch before choosing your equipment. The Consumers’ Association discusses Wi-Fi 6 as an option for many users, but a Wi-Fi generation alone won’t identify the cause of a fault.

  • Confusing different product versions

    Similar model names don’t mean that two versions have the same connections or installation requirements. For example, the Deco X50-PoE is a different version from the standard Deco X50.

    Before buying, compare the full model name, number of nodes, connections and power supply for the version on offer.

Brands to compare

TP-Link

The Deco X50 is a dual-band mesh system with Wi-Fi 6, available in versions with one, two or three nodes.

  • TP-Link says the standard Deco X50 has three gigabit ports per node and supports optional Ethernet backhaul.
  • The advertised coverage doesn’t guarantee reception through the floors in your home. The Deco X50-PoE is a different version.

ASUS

The ZenWiFi AX (XT8) is a tri-band mesh system that ASUS positions for homes with multiple floors, among others.

  • ASUS lists a configurable wireless backhaul band and support for Ethernet backhaul.
  • The advertised radio speed and coverage don’t tell you how many nodes your home needs or how well a recording will play there.

NETGEAR

NETGEAR describes the Orbi RBK763S as a tri-band set comprising a router and two satellites.

  • NETGEAR lists a dedicated connection between the router and satellites, as well as seven gigabit ports for the set.
  • The manufacturer includes one year of Armor; check the terms before relying on continued access to security features. Coverage and streaming claims are manufacturer specifications.

FRITZ!

The FRITZ!Repeater 3000 AX is an expansion option if you already have a compatible FRITZ!Box; it isn’t a complete system on its own.

  • FRITZ! lists three radio bands, two gigabit LAN ports and a LAN connection to a FRITZ!Box.
  • The manufacturer says the repeater can also work with other routers; the FRITZ! mesh features described assume a compatible FRITZ! setup.

Mesh Wi-Fi products at Joybuy

This selection includes mesh systems with two or three nodes for Wi-Fi coverage in several areas of your home, including models with Wi-Fi 6 or Wi-Fi 7. Before buying, check that the version suits your network needs and carries the CE mark; the Dutch Authority for Digital Infrastructure says that equipment sold in Europe must meet the relevant requirements and carry a CE mark.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

This two-node mesh system is an option if you want to use Wi-Fi in several areas of your home.

The product name specifies two nodes. Check that the exact model supports the backhaul you need for your setup.

View at Joybuy
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7, white

ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7, white

This two-node mesh system could be a good fit if you’re looking for a ZenWiFi system with two nodes.

The product name specifies tri-band Wi-Fi 7. Check that its features and connections suit your existing network.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

This two-node system is an option if you want to use mesh Wi-Fi in several areas of your home.

The product name specifies Wi-Fi 6 and two nodes. For a wired setup, check that the exact version supports Ethernet backhaul.

View at Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

This three-node system is an option if you want to extend Wi-Fi coverage across multiple floors.

TP-Link says the standard Deco X50 has three gigabit ports per node and supports optional Ethernet backhaul. Check the placement and connection in your home.

View at Joybuy
ASUS ZenWiFi BT10 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT10 2-pack, tri-band Wi-Fi 7

This two-node mesh system is an option if you want Wi-Fi in several areas of your home.

The product name specifies tri-band Wi-Fi 7. Check the connections and backhaul options on the version available before choosing this system.

View at Joybuy

Frequently asked questions

How many mesh nodes do I need for multiple floors?

Use the number of floors as a starting point, not a guarantee of coverage. The Consumers’ Association recommends two nodes for two floors and three for three in its guide; then check reception and the connection between nodes in your home.

Where should I place a wireless mesh node?

Don’t place a node only once the Wi-Fi signal has almost disappeared. Keep obstacles between nodes to a minimum and check the connection indicator; the Consumers’ Association recommends having no more than two rooms between Wi-Fi nodes, where possible.

Can I use my own router in the Netherlands?

Yes. According to ACM ConsuWijzer, you have the right to choose your own router. A provider can refuse a device in certain circumstances, for example if it’s unsafe. If you’re replacing equipment supplied by your provider, ask which settings you need to connect it.

Do I need a permit or registration to use Wi-Fi at home?

No. The Dutch Authority for Digital Infrastructure gives Wi-Fi as an example of frequency use that doesn’t require a permit, notification or registration. This doesn’t mean your connection will always be free from interference.

What are my rights if a set bought online isn’t fit for purpose?

If a product is faulty, the seller must resolve the problem under the applicable conditions, according to ACM ConsuWijzer; these rights are separate from any manufacturer’s warranty. For a standard online purchase, you generally also have a statutory 14-day cooling-off period after delivery, although exceptions may apply.