Workshop attendee with cabling
You work across more than one floor and can connect mesh nodes using Ethernet. You want to make the connection between nodes less dependent on the wireless signal travelling through the floor.
The right mesh connection depends mainly on how the nodes on different floors communicate with one another. With Ethernet backhaul, you connect them using a network cable; without a cable, placement and the wireless connection determine what’s possible, while powerline is an alternative you can try at home. If you want to keep your existing router, also check the mesh features available and the connection mode.
You work across more than one floor and can connect mesh nodes using Ethernet. You want to make the connection between nodes less dependent on the wireless signal travelling through the floor.
You need coverage on another floor but can’t run a network cable. Node placement and whether wireless backhaul or powerline is practical are important considerations.
You want to keep your current connection and extend coverage only where needed. The mesh features you want and the router or access point mode will help determine which solution is right for you.
First, map out where you’ll be taking part in the workshop, then see how the mesh nodes can connect to one another. That way, you can compare solutions based on the connection you need, rather than just an advertised Wi-Fi speed.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Reliable participation | Test the connection on every floor where you’ll be taking part in the workshop, and check your internet connection and the link between the mesh nodes. | If I mainly need a reliable connection for speaking, listening and screen sharing, I prioritise reliability; around 36% of consumers have the same main requirement. |
| Connection without a network cable | Check where the nodes can be placed and test the wireless connection or powerline on the floors where you need it. | If I can’t run an Ethernet cable between floors, I want to know whether the nodes can reach one another reliably over Wi-Fi or through the electrical wiring; around 29% of consumers prioritise connecting floors without a network cable. |
| Coverage at every workshop location | Make a note of the places you’ll work from on each floor and compare the number of nodes. Check the results where you’ll be taking part in the workshop. | If I want to take part in the workshop from different places in my home, the network needs to reach them; around 21% of consumers prioritise coverage in multiple workshop locations. |
| Keeping your existing router | Check your router model, the mesh features you want and whether installation in access point mode is suitable. | If my current router works well, I want to keep it and extend coverage only where needed; around 14% of consumers prioritise keeping their existing setup. |
A product specification can’t predict how well the connection will work through the floors of your home or where you’ll be taking part in the workshop.
Map out where you’ll be working and test the connection on each floor before choosing based on speed or coverage area.
The extra node also needs to connect to the rest of the mesh network. Placing it somewhere without a usable connection won’t automatically solve the problem.
Check the connection between the mesh nodes and, if needed, try a different location or backhaul route, such as Ethernet or powerline.
A repeater and a full mesh system may offer different installation options and mesh features. For example, FRITZ! describes Mesh integration with a FRITZ!Box; the features described won’t automatically apply to every router combination.
Make a note of your current router model and check which features and connection modes work with the system you’re considering.
If the features you want aren’t compatible with your current router, you may need an additional router or extra mesh nodes.
The Deco range includes mesh solutions with Ethernet backhaul, as well as a model that combines Wi-Fi and powerline.
The FRITZ!Repeater 3000 AX is a tri-band extender for anyone using or considering a FRITZ!Box.
ZenWiFi XD5 is a dual-band Wi-Fi 6 mesh range designed for homes with multiple floors, among other uses.
Orbi 770 is a tri-band Wi-Fi 7 mesh option for anyone considering a more advanced home network setup.
The Joybuy products below are mesh systems designed to connect multiple floors. They differ in the number of nodes, Wi-Fi generation and wired connection options.
No image available
This three-node mesh system is an option for connecting several workshop locations in your home; test the coverage on the floors where you’ll be taking part in the workshop.
Dual-band, 2.4 GHz and 5 GHz, Wi-Fi 5 (802.11ac) and two Ethernet ports per unit.
No image available
This set is suited to anyone looking to connect multiple floors and have the option of using Ethernet backhaul if cabling is available.
Three units, dual-band, 2.4 GHz and 5 GHz, Wi-Fi 6 (802.11ax) and three gigabit Ethernet ports per unit.
No image available
A two-node mesh system with PoE support to consider if you want to set up your system using Ethernet cabling and PoE.
Dual-band, 2.4 GHz and 5 GHz, Wi-Fi 6 (802.11ax) and two Ethernet ports per unit. Check which PoE equipment your setup requires.
No image available
This three-unit set is an option if you want to connect several workshop locations and are considering a tri-band model; the band configuration alone doesn’t guarantee a better connection on a particular floor.
Tri-band, 2.4 GHz, 5 GHz and 6 GHz, Wi-Fi 6E (802.11ax) and three Ethernet ports per unit.
No image available
This three-unit set is designed for multiple mesh locations; PoE support may be useful if you want to install the system using wired connections.
Dual-band, 2.4 GHz and 5 GHz, Wi-Fi 6 (802.11ax), PoE support and two Ethernet ports per unit. Check which PoE equipment your setup requires.
No. A high advertised speed doesn’t prove that the connection will work well where you’re taking part in the workshop or between floors. Test the connection there and check your internet connection too. Zoom sets out separate recommended bandwidths for different webinar roles; those figures don’t automatically apply to a workshop on another platform.
Yes, with a system and configuration that support this. TP-Link describes an access point mode for Deco, with its own connection options for wired satellites. Check which features you’ll retain with your router combination and what connection requirements your provider sets.
Place the nodes where they can reach the workshop locations while maintaining a usable connection to the mesh network themselves. Once installed, test the connection you need for the workshop on every floor; adding a node where the signal is already dropping out won’t necessarily solve the problem.
Online product purchases generally come with a statutory 14-day cooling-off period after delivery, although exceptions may apply; ACM ConsuWijzer explains how this cooling-off period works. Statutory warranty is separate from any retailer or manufacturer’s warranty. The right to change your mind about a purchase and your rights if a product is faulty are two different things.
ACM ConsuWijzer explains your right to use your own router, subject to the applicable safety and connection requirements. Wi-Fi equipment placed on the market in the Netherlands must meet European radio equipment requirements and carry the correct CE marking, as explained by the Dutch Authority for Digital Infrastructure. Also check that your chosen router is compatible with your provider’s connection.