Who is this guide for?

Housemates with weak Wi-Fi on other floors

You want to know whether it’s possible to run a cable between floors and where an extra node can still maintain a connection. Consumentenbond and Ziggo offer practical advice on coverage and placement.

Housemates who are often online at the same time

You’re comparing connections in the places where housemates study, make video calls or stream, without treating theoretical Wi-Fi speeds as guaranteed real-world speeds. Consumentenbond and TP-Link highlight important factors to consider with mesh Wi-Fi.

The person managing the shared network

You need to take the existing router, settings, security and the setup shared by your housemates into account. TP-Link, FRITZ! and Ziggo explain the requirements for different ways to extend your network.

What should you look for when buying?

First, check whether network cables are available between floors, then check the router and equipment you already have at home. Decide how many nodes you need and whether you’ll need extra power only once you know where they’ll go.

Factor to consider What should you check? Who is this important for?
Coverage between floors Check whether cables are available. Without cables, each wireless node needs to maintain a good connection to the network. If I work or study on another floor, I want to know whether the signal reaches it before choosing extra nodes. Around 33% of consumers rank coverage between floors as their top priority.
Being online at the same time Compare supported Wi-Fi standards and connections, and take your own devices and internet connection into account. When housemates are making video calls, streaming or studying at the same time, I look at the connection where we use our devices, not just the advertised maximum speed. Around 27% of consumers prioritise simultaneous use.
Compatibility with your existing network Check the router model, available ports and which features remain available in the connection mode you choose. If there’s already a router or mesh network at home, I want to know whether an extension will work with it before adding a second system. Around 20% of consumers mainly choose based on compatibility with their existing network.
Management, security and power Agree on who will manage the network, and check what PoE equipment you’ll need and whether the specific model has CE marking. For a shared network, I want to know in advance who’ll manage it and what’s needed to install the nodes I choose. Around 20% of consumers prioritise management and the practical requirements of the setup. The Dutch Authority for Digital Infrastructure states that Wi-Fi equipment sold in the Netherlands must have the correct CE marking.

Common pitfalls

  • Assuming the advertised coverage area guarantees reception on every floor

    Walls, floors, other obstacles and the position of your equipment all affect coverage. A manufacturer’s stated coverage area doesn’t, by itself, tell you how Wi-Fi will perform in every room of a particular home.

    Identify the rooms where you have problems and test the connection between nodes before deciding how many you need.

    You may need to change the placement, install cabling or add another node.

  • Placing a wireless node where the source signal is already lost

    A wireless mesh node still needs to connect to the network. If you put it somewhere with no usable signal, it won’t automatically fix the connection to that floor.

    Start somewhere the existing signal is still strong. If the floors can’t connect reliably over Wi-Fi, look into installing cables.

  • Choosing PoE without checking the power requirements

    For the Deco X50-PoE, TP-Link specifies IEEE 802.3at or 802.3bt; IEEE 802.3af is not supported. The power supply you need depends on the specific equipment and model.

    Check the PoE standard, ports and available power budget before choosing your setup.

    You may need a compatible PoE switch or injector, and possibly cabling.

  • Assuming a second mesh brand will automatically work with your existing system

    The FRITZ! mesh integration described requires a compatible FRITZ!Box. A repeater connected to a router from another brand won’t automatically offer the same integration.

    First, note your provider, router model and existing nodes. Then check whether your specific combination is supported.

Brands to consider

TP-Link

The Deco range includes mesh nodes for wireless connections and optional Ethernet backhaul. The Deco X50-PoE is designed for PoE installation.

  • According to TP-Link, the Deco X50 has three gigabit ports per node.
  • For the Deco X50-PoE, TP-Link specifies compatible PoE power. Port configurations may vary by hardware version, so check the exact model.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system that you can compare for wireless placement and Ethernet backhaul.

  • ASUS describes Ethernet backhaul for the XD5 when Ethernet ports are available in the walls, and says it can be managed through the Router app.
  • Advertised speed and coverage are manufacturer specifications, not a guarantee of coverage in a particular home.

FRITZ!

The FRITZ!Repeater 3000 AX is primarily an extension option for a home with a compatible FRITZ!Box. You can also connect the model via LAN as an access point.

  • FRITZ! lists three frequency bands and two gigabit LAN connections for this model.
  • Automatic integration into the FRITZ! mesh described depends on your FRITZ!Box setup. A standalone repeater isn’t automatically a complete system for multiple floors.

Ziggo

SmartWifi pods are one possible extension option to look into if your household already uses Ziggo.

  • Ziggo provides information about Wi-Fi boosters and advice on placement or cabling for its services.
  • Offers depend on your subscription. Provider information isn’t a promise that every package includes the same options, and it doesn’t prove that pods will form one system with mesh equipment from other brands.

Mesh products at Joybuy

This selection includes mesh systems for use in multiple locations, including options with a wired connection and a PoE model. For each model, check that its connections, power supply and setup suit your home network.

TP-Link Deco X50 (3-pack) mesh system

TP-Link Deco X50 (3-pack)

A mesh system with three nodes to consider if you want to build a connection in several parts of your home.

Wi-Fi 6; three gigabit ports per node according to TP-Link; optional Ethernet backhaul between Deco units.

View at Joybuy
Linksys Velop Pro 7 mesh system

Linksys Velop Pro 7

An expandable mesh network to consider if you need several nodes and wired connections.

Wi-Fi 7; listed as including two mesh nodes; five Ethernet ports, including one 2.5 Gbps port. Expansion is designed for compatible Linksys Cognitive Mesh devices.

View at Joybuy
ASUS ZenWiFi BT10 mesh system with two nodes

ASUS ZenWiFi BT10 (2-pack)

A mesh system with two nodes to consider if you want to use an ASUS AiMesh setup.

Tri-band Wi-Fi 7; Ethernet ports listed per node at 1 and 10 Gbps. The description mentions expansion with AiMesh nodes and management through the ASUS app.

View at Joybuy
TP-Link Deco X50-PoE mesh system with two nodes

TP-Link Deco X50-PoE (2-pack)

An option to consider if you want to connect and power your mesh nodes via Ethernet.

Wi-Fi 6; the product information lists PoE and WPA3. For the Deco X50-PoE, TP-Link specifies IEEE 802.3at or 802.3bt, not 802.3af. Check that the PoE power supply suits the model you choose.

View at Joybuy
TP-Link Deco XE75 Pro mesh system with three nodes

TP-Link Deco XE75 Pro (3-pack)

A mesh system with three nodes to consider if you want to build a Wi-Fi 6E network.

Tri-band Wi-Fi 6E; the product information lists Ethernet ports per node, WPA3, guest access and QoS.

View at Joybuy

Frequently asked questions

How can you check whether the problem is with Wi-Fi or your internet connection?

Compare a wired test close to the connection point with Wi-Fi tests on the floors where you’re having problems. ACM ConsuWijzer recommends using a wired connection close to the connection point for a reliable test. Mesh won’t fix a problem with the incoming connection.

Can a Deco system work behind an existing router?

Yes. TP-Link describes an access point mode that lets Deco extend your existing network and use Ethernet backhaul. Check which features you need, though: DHCP and some advanced Deco router features don’t work in the same way in this mode.

Does a PoE mesh node need a power socket?

According to TP-Link, the Deco X50-PoE can run via a compatible PoE power supply over an Ethernet cable; a DC adapter is an alternative. TP-Link specifies IEEE 802.3at or 802.3bt, not 802.3af. Check that the switch or injector and the total available power suit the model you choose.

What warranty applies when buying in the Netherlands?

ACM ConsuWijzer distinguishes between a voluntary manufacturer’s or seller’s warranty and statutory warranty rights. If a product doesn’t perform as you could reasonably expect under normal use, the seller must put things right under the applicable terms. There isn’t one fixed statutory warranty period that automatically applies to every device.

What requirements does Wi-Fi equipment need to meet for use in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, the equipment must have the correct CE marking. Check the marking on the specific model supplied and follow the installation and user instructions. A statement on a retailer’s website doesn’t confirm this on its own.