Who is this relevant to?

Teams working across several floors

If you’re working together on a weekend project across several floors, where you place the mesh points and how they connect are important considerations. The Consumentenbond identifies multi-storey buildings as a situation where you may want to weigh up how many points you need.

Users in a building without network cables

If you can’t run Ethernet between floors, you’ll need to check whether wireless mesh works in your planned locations or whether powerline is an option. TP-Link describes the PX50 as a system that combines Wi-Fi with G.hn powerline.

Organisers with lots of temporary devices

If participants will be connecting laptops and phones, it’s worth checking the number of Ethernet ports and the guest access available on each model. For example, ASUS lists guest network support for the ZenWiFi XT9.

What should you look for when choosing?

Start with the connection between the mesh points, then check the number of points, the connections and how you’ll manage temporary participants.

What to consider What should you check? Who is this important for?
Connection between floors Check whether network cables are available between the points and whether the system supports Ethernet backhaul. TP-Link describes Ethernet backhaul for Deco as more stable and faster than Wi-Fi between the units. If I’m working on different floors during the project, I want the mesh points to connect reliably with each other; around 36% of consumers put this first.
Coverage without cables Map out the work areas and possible locations for the points. Test the wireless connection there; if you’re considering powerline, also check whether it works with the building’s electrical wiring. When there’s no network cable between floors, I want to know which connection will work in the building; around 29% of consumers focus mainly on this.
Simultaneous use Count the active devices and the wired connections you need. TP-Link lists three gigabit ports per unit for the Deco X50. If several participants will be using laptops and phones at the same time, I want to know whether the connections and Wi-Fi standard suit their devices; around 21% of consumers put simultaneous use first.
Guest access and management Check whether the exact model has a guest network and suitable access settings, and decide who will manage updates and access after the project. ASUS lists guest network support for the ZenWiFi XT9. When temporary participants need access, I want to be able to manage it afterwards; around 14% of consumers consider guest access their top priority.

Common pitfalls

  • Assuming an advertised coverage area or radio speed guarantees coverage on every floor

    The connection also depends on where you place the points and how they connect to one another. An advertised speed doesn’t automatically tell you how well the system will work in your work areas.

    Check the connection at the actual project locations and, if necessary, compare a different position, Ethernet or powerline.

  • Putting a mesh point in a problem area without checking its connection back to the network

    A strong signal from an individual point won’t help enough if that point itself has a weak connection to the other mesh points.

    First, assess the connection between the points. Use suitable existing Ethernet cables or test a different position.

  • Treating different versions of a model as identical

    For the X50-PoE, TP-Link’s Dutch product page describes version V2, while the Joybuy listing doesn’t confirm the hardware version. The Joybuy description for the PX50 also gives conflicting numbers of Ethernet ports.

    Before buying, compare the full model name, hardware version, package contents and ports with the manufacturer’s information. For wireless equipment placed on the European market, also check the applicable product requirements and the CE marking on the specific product. The Rijksinspectie Digitale Infrastructuur states that stricter requirements apply to products placed on the European market from 1 August 2025.

Brands to consider

TP-Link

Deco models offer different ways to connect mesh points to one another.

  • TP-Link describes Ethernet backhaul for the X50, PoE installation for the X50-PoE, and Wi-Fi plus G.hn powerline for the PX50.
  • These are TP-Link’s specifications and descriptions of intended use, not independent speed tests. Check the version: TP-Link’s Dutch X50-PoE product page describes version V2.

ASUS

The ZenWiFi XT9 is a tri-band Wi-Fi 6 model to consider if you’re looking at wireless mesh and guest access.

  • ASUS lists three bands, a 2.5G WAN port and guest network support for the XT9.
  • ASUS says that 160 MHz availability on 5 GHz may vary by region. These specifications don’t prove what coverage you’ll get in your building.

NETGEAR

The Orbi 770 series is a tri-band Wi-Fi 7 system to consider when weighing up a wireless or 2.5G wired connection between points.

  • NETGEAR lists a 2.5G wired backhaul option.
  • The maximum system figures given are manufacturer specifications, not measured performance for your group project. First, decide whether you need the extra features.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering if you’re expanding an existing FRITZ! setup.

  • FRITZ! describes connecting to a FRITZ!Box via LAN and lists two gigabit LAN ports.
  • This is a repeater, not a complete multi-point set on its own. The mesh features described for use together are specific to the FRITZ! setup.

Joybuy products

These mesh systems are designed for work areas across several floors, with options for wired or wireless connections between points and different numbers of units.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh system with wired and wireless backhaul options may suit you if you want to match the connection between points to the cabling available.

  • Tri-band Wi-Fi 7.
  • Three Ethernet ports per device.
Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7

This ZenWiFi mesh option may suit you if you want to compare wired backhaul and guest access.

  • Dual-band: 2.4 GHz and 5 GHz.
  • Wi-Fi 7 (802.11be).
  • The product description lists a guest network and a wired backhaul option.
Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A three-point set is worth considering when project work areas are spread across several floors. Check the connection at the actual locations.

  • Dual-band Wi-Fi 6 (802.11ax).
  • Three gigabit Ethernet ports per unit.
Joybuy
TP-Link Deco X50-PoE mesh system, 2-pack

TP-Link Deco X50-PoE (2-pack)

This set may suit you if you want to factor PoE support into your choice of placement. Check that your setup is compatible first.

  • Dual-band Wi-Fi 6 (802.11ax).
  • PoE support.
  • Two Ethernet ports per unit and guest access, according to the product description.
Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack)

A three-point set with tri-band Wi-Fi is worth comparing for project work areas on different floors.

  • Tri-band Wi-Fi 6E.
  • The product description lists guest access and Ethernet ports per unit.
Joybuy

Frequently asked questions

How many mesh points should I consider for several floors?

The Consumentenbond suggests starting with two points for two floors and three for three floors. Then test the connection in the project areas themselves: building materials, placement and the connection between points all affect how the setup will work in your building.

How do I connect Deco points by cable if I’m keeping my provider’s router?

First, check whether Deco is in router or access point mode. TP-Link says that, in router mode, you should connect a wired satellite to the LAN side of the main Deco or to a switch connected to it. In access point mode, TP-Link also describes connecting via the main modem or router. Then check the connection in the Deco app.

What maintenance will the network need after the weekend?

Keep the router software up to date and set up automatic updates if that option is available. VeiligInternetten recommends router updates; also check whether temporary guest access is still needed and who will manage it afterwards.

What should I consider when it comes to energy use and the legal guarantee?

Factor energy use into your comparison; the Consumentenbond includes it in its assessment of Wi-Fi boosters. If a consumer product is faulty, the Dutch government says the retailer is responsible for the legal guarantee, even after any manufacturer’s guarantee has expired.

Do I need a licence for Wi-Fi in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, Wi-Fi on licence-exempt frequencies does not require notification or registration, provided the conditions of use are met. Wireless equipment placed on the European market must meet the applicable product requirements; check the CE marking on the specific product, among other things.