Who is mesh Wi-Fi for across multiple floors?

Viewers without cables between floors

You want to improve coverage without running a network cable between mesh nodes. In that case, their placement and the quality of the connection between them are important considerations. The Consumers’ Association recommends keeping obstacles between Wi-Fi nodes to a minimum.

Viewers with network cables

You can connect nodes on different floors by cable and are looking for a system with suitable ports and connection options. TP-Link Netherlands describes Ethernet backhaul for Deco systems.

Viewers who want to keep their provider’s router

You want to extend your existing network and check which connection mode works with your router. TP-Link describes access point mode for Deco when the existing router continues to manage the network functions.

What should you look for when choosing?

First, check whether you can connect your mesh nodes using a network cable. Without a cable, where you place the nodes becomes even more important. Then compare the set size and Wi-Fi features you need with your own setup.

What to consider What to look for Who it matters most to
Coverage on the floor where you watch Test the connection on the device you watch on and work out where an extra node can still get a usable connection to the network. I want good coverage on the floor where I watch, even if the connection is strong next to the router. Around 36% of consumers prioritise coverage where they watch.
Wireless connection between nodes Check that the nodes are positioned with as few obstacles between them as possible. For tri-band models, see whether you can configure a dedicated backhaul band. Without a cable between floors, I want the mesh nodes to maintain a good connection with each other. Around 29% of consumers prioritise the wireless connection between nodes.
Existing network cables Check the cable route and the number of Ethernet ports you need, and follow the connection instructions for the router or access point mode on the exact model. If cables are already in place, I want to know whether I can use them to connect the mesh nodes and make good use of the available ports. Around 21% of consumers prioritise wired connections.
Cost and your current router Compare the set size you need and check that the system can connect to your existing router in the way you want. I only want to replace or extend my provider’s router if necessary, and I don’t want more equipment than my setup requires. Around 14% of consumers prioritise cost and compatibility with their current router.

Common buying mistakes

  • Confusing advertised Wi-Fi speed with streaming speed

    A Wi-Fi standard or stated speed doesn’t, on its own, tell you how good the connection will be on another floor. Your internet speed and the reception where you watch also play a part.

    Test the connection on the device you watch on, and compare the placement of the mesh nodes and the connection between them—not just the speed on the box.

  • Placing a wireless mesh node in a dead zone

    A wireless node needs a usable connection to the rest of the network itself. If you put it somewhere the signal has almost disappeared, it won’t automatically restore the connection further away.

    Start by placing it somewhere with fewer obstacles between the nodes, then check the connection using the system’s app or signal indicator. The Consumers’ Association recommends keeping them no more than two rooms apart.

  • Choosing extra nodes or Wi-Fi 7 without checking what you need

    A newer Wi-Fi standard or more nodes won’t automatically improve things for a single documentary stream. Extra devices left on all the time can increase electricity use.

    Compare the set size you need and the energy information for the specific model before expanding your setup. The Consumers’ Association notes that Wi-Fi 7 doesn’t automatically offer the average user more than Wi-Fi 6.

    Keeping more equipment switched on can increase electricity use; the impact depends on the set you choose and how you use it.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 mesh system, available in the Netherlands in two- and three-node versions.

  • TP-Link Netherlands lists three gigabit ports and optional Ethernet backhaul for the Deco X50.
  • The stated coverage isn’t a measurement of performance in your home. Check that the cable route and connection mode suit your setup.

ASUS

The ZenWiFi AX (XT8) is a tri-band Wi-Fi 6 option to compare if the connection between nodes needs to be wireless.

  • ASUS describes a second 5GHz band that can be configured for backhaul, and also mentions Ethernet backhaul.
  • These are model specifications, not an independent measurement of coverage across the floors of your home.

FRITZ!

The FRITZ!Mesh Set 1700 (3-pack) includes three nodes and, according to FRITZ!, can work with an existing router or modem.

  • FRITZ! lists one gigabit LAN connection per node, automatic updates and a five-year manufacturer’s warranty.
  • Check which connection method suits your setup. A higher Wi-Fi standard won’t automatically make a documentary stream better.

Mesh Wi-Fi at Joybuy

This selection at Joybuy includes mesh systems with different band configurations and Wi-Fi generations, designed to provide Wi-Fi in several areas of your home. Compare them based on the cable routes available, where you can place the nodes and the coverage you need. For radio equipment sold in the Netherlands, check the relevant conformity requirements and CE marking. The RDI says that only products bearing the CE mark may be sold in Europe.

TP-Link Deco E4, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4, 3-pack, dual-band Wi-Fi 5

An option to compare if you’re looking for a mesh set with several nodes to provide coverage around your home.

The product name lists dual-band 2.4GHz and 5GHz, and Wi-Fi 5 (802.11ac). Check that the connection options suit your existing router and any cable routes you plan to use.

View at Joybuy
ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

An option to compare if you’re considering a tri-band mesh system with Wi-Fi 7.

The product name lists 2.4GHz, 5GHz and 6GHz bands, and Wi-Fi 7 (802.11be). Check that the connection and backhaul options suit your setup.

View at Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4, dual-band Wi-Fi 7

An option to compare if you’re looking at dual-band mesh with Wi-Fi 7.

The product name lists 2.4GHz and 5GHz bands, and Wi-Fi 7 (802.11be). Check the options for connecting to your existing network and the type of connection you want between nodes.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

An option to compare if you’re looking for several mesh nodes and want to explore wired backhaul.

The product name lists dual-band 2.4GHz and 5GHz, and Wi-Fi 6 (802.11ax). TP-Link Netherlands describes the Deco X50 as having three gigabit ports and optional Ethernet backhaul. Check your cable route and the connection mode you want.

View at Joybuy
Linksys Velop Pro 7, tri-band Wi-Fi 7

Linksys Velop Pro 7, tri-band Wi-Fi 7

An option to compare if you’re considering tri-band mesh with Wi-Fi 7.

The product name lists 2.4GHz, 5GHz and 6GHz bands, and Wi-Fi 7 (802.11be). Compare the connection options and check compatibility before adding extra mesh nodes.

View at Joybuy

Frequently asked questions

What internet speed do I need to stream a documentary?

It depends on the streaming service and picture quality. For a single stream, Netflix recommends 3 Mbps for HD 720p, 5 Mbps for Full HD 1080p and 15 Mbps for 4K UHD, in each case with a stable connection. These aren’t universal requirements for every service, so test the connection on the device you watch on.

Where should I place a wireless mesh node?

Don’t place the node somewhere the signal has almost disappeared. The Consumers’ Association recommends keeping obstacles between nodes to a minimum and placing them no more than two rooms apart. Then check the placement using your system’s app or signal indicator.

Can mesh work alongside my existing router?

It can, with systems designed to support this. TP-Link describes access point mode for Deco as a common choice when your existing router continues to manage the network functions. Follow the connection instructions for the specific model.

Do I need Wi-Fi 7 to stream a documentary?

Not necessarily. The Consumers’ Association notes that Wi-Fi 7 doesn’t automatically offer the average user more than Wi-Fi 6. First, check the connection where you watch, your internet speed and how the mesh nodes connect to each other.

What should I check about the CE marking?

Before buying, check that the specific device meets the relevant European conformity requirements and has the correct CE marking. The Dutch Authority for Digital Infrastructure says that only products bearing the CE mark may be sold in Europe.