Who is this choice relevant to?

Viewers with walls or floors in the way

Is your study a long way from the router, and are you having trouble accessing local media? First, find out whether you can run a network cable between the rooms. The Consumers’ Association notes that walls, ceilings and other obstacles can interfere with a Wi-Fi signal.

People managing a shared media server

If you want to keep your existing router and media server, check that the network mode you choose and any device isolation settings allow local sharing. TP-Link notes that isolated devices cannot exchange data with devices on the regular home network.

Households with several playback devices

If you want to connect devices by cable, check the ports available where you’ll use them and whether any ports are already needed to connect the mesh nodes. The advertised Wi-Fi speed alone won’t tell you how many connections are free.

What should you look for when choosing?

First, decide how the mesh nodes will communicate with each other and whether your existing router should continue managing the network. Then check local access and available ports.

Mesh with ethernet backhaul

When to choose it: if you can run a network cable between the router and the study, especially if walls or floors are affecting the wireless connection.

Trade-off: running cables takes work and may require extra equipment. Also check which connections are supported for a mesh node in the mode you’ve chosen.

Fully wireless mesh

When to choose it: if running a cable isn’t possible and you can place an intermediate node somewhere it will still receive a usable signal.

Trade-off: distance and obstacles still affect the wireless connection between nodes. A node placed where there’s no usable incoming signal won’t solve the problem on its own.

Keep your existing router

When to choose it: if you want to keep your current router and network management. An access point may be an option if there’s already a cable running to the study.

Trade-off: check compatibility for each device. An access point won’t automatically be part of the same mesh system; a FRITZ! mesh extender must be compatible with the FRITZ!Box you’re using.

What to consider What should you check? Who is this important for?
Connection to the study Check whether ethernet backhaul is possible. If you choose a wireless connection, test the signal where you plan to place the intermediate node. If I want to play media remotely, I need to know whether the node in the study itself still has a connection. Around 36% of consumers put the connection between rooms first.
Local access to the server Check the router or access point mode and any device isolation settings, then test access from the playback device. If my playback device needs to reach the media server, I want local network traffic to be allowed, not just internet access. Around 29% of consumers prioritise access to a shared server.
Available network connections Count the ports left after connecting the backhaul, and consider whether you might need a switch. If I want to connect a computer or playback device by cable in the study, there needs to be a free port. Around 21% of consumers give wired connections for these devices top priority.
Keeping your router and matching your setup Check which router functions remain available in access point mode and how many mesh nodes your floor plan requires. If I want to keep using my current router, I need an extension that suits my setup, without buying more nodes than necessary. Around 14% of consumers prioritise keeping their existing equipment.

Common mistakes

  • Placing a mesh node where the original signal is already lost

    With a wireless connection, the mesh node itself also needs a usable incoming signal. Distance and obstacles still make a difference.

    Check the signal where you intend to place the node. If the rooms have a poor wireless connection, look into a wired connection.

  • Only checking whether the internet works

    A playback device may have internet access but still be unable to access the media server on your home network. Device isolation can prevent local data traffic.

    Try opening a file on the server from the playback device in the study, and check your network and isolation settings.

  • Counting ports without allowing for the backhaul

    A port used to connect mesh nodes won’t also be available for a computer or another wired device.

    Before choosing a set, make a note of the devices and cables you’ll need to connect to the node in the study.

Brands to compare

TP-Link

Deco systems, including the X50, are worth considering if you want to compare router and access point modes or ethernet backhaul.

  • TP-Link describes ethernet backhaul as a wired connection between Deco units.
  • This feature alone doesn’t tell you how well the connection will work in a home with thick walls. Also check which connections are supported in the mode you’ve chosen.

ASUS

The ZenWiFi BD4 is worth comparing if higher-rated port speeds are one of your selection criteria.

  • ASUS specifies two auto-sensing 2.5G ports and dual-band Wi-Fi 7 for the BD4.
  • These specifications don’t tell you how well the connection to a media server will work in your study.

FRITZ!

FRITZ! mesh extenders are worth considering if you want to keep using a compatible FRITZ!Box.

  • According to FRITZ!, the Repeater 3000 AX can connect to a FRITZ!Box via LAN and has two gigabit LAN ports.
  • Using it with another router doesn’t automatically make it part of that router’s mesh system.

NETGEAR

The Orbi 770 series is worth looking into if you want to compare wired capacity.

  • NETGEAR lists 2.5-gigabit ports and tri-band Wi-Fi 7 for the series.
  • These manufacturer specifications don’t show whether the series will work better in your home or which set will suit your setup.

Joybuy products

This Joybuy selection features TP-Link Deco mesh sets for use across several rooms. Compare the number of units, the listed ports and whether ethernet backhaul suits your network setup for each model.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A mesh set with two units for setting up coverage across several rooms.

The product description lists 10, 2.5 and 1 Gbps WAN/LAN ports per unit, as well as wired and wireless backhaul.

View at Joybuy
TP-Link Deco X50 3-pack with dual-band Wi-Fi 6

TP-Link Deco X50 3-pack, Wi-Fi 6

The three units offer an option for setting up mesh across several rooms.

The product description lists three gigabit ports per unit and optional ethernet backhaul.

View at Joybuy
TP-Link Deco XE75 Pro 3-pack with tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro 3-pack, Wi-Fi 6E

A mesh set with three units for setting up coverage across several rooms.

The title and product description list tri-band on 2.4, 5 and 6 GHz and Wi-Fi 6E.

View at Joybuy
TP-Link Deco XE75 mesh set with tri-band Wi-Fi 6E

TP-Link Deco XE75, Wi-Fi 6E

The product description presents a mesh set with three units for use across several rooms.

Three ethernet ports are listed per unit, and the system is described as tri-band Wi-Fi 6E.

View at Joybuy
TP-Link Deco X50 2-pack with dual-band Wi-Fi 6

TP-Link Deco X50 2-pack, Wi-Fi 6

This set of two mesh units is an option for setting up coverage across several rooms.

The product description lists three gigabit ports per unit and optional ethernet backhaul.

View at Joybuy

Frequently asked questions

Will an extra mesh node in the study be enough?

Not necessarily: with a wireless connection, distance and obstacles can also weaken the signal reaching that node. Test the connection where you plan to place it, or use ethernet backhaul if you can run a network cable there.

How do I connect Deco nodes by cable without replacing my existing router?

TP-Link describes access point mode for setups where the existing router continues to manage the network functions. Follow the connection instructions for that mode, as the permitted way to connect satellite units differs from router mode.

Why can’t a device with internet access see my media server?

One thing to check is whether device isolation is enabled for the playback device. TP-Link notes that isolated devices then cannot exchange data with devices on the regular home network. This is a possible cause, not a diagnosis of your network.

What rights do I have after buying something online in the Netherlands?

According to ACM ConsuWijzer, online product purchases generally come with a cooling-off period of up to 14 days after delivery. You’re also covered by the legal guarantee for as long as the product should meet the expectations you’re entitled to have when using it normally; there isn’t one fixed guarantee period for every product.

What compliance check is relevant for a Wi-Fi router in the Netherlands?

The Dutch Authority for Digital Infrastructure says that the correct CE marking is required for products including Wi-Fi routers. Check the marking and the exact version of the product before reaching a conclusion about that specific model.