Who is mesh Wi-Fi for a media server suitable for?

Households with weak Wi-Fi upstairs

You want to use your media server on other floors too. Decide where to place the Wi-Fi nodes and whether you can connect them with cables; TP-Link describes Ethernet backhaul as a wired connection between Deco nodes.

Households with lots of simultaneous streams

Several devices access the local server at the same time. So consider both the connection between mesh nodes and the wired connections for the server and other equipment.

Households with an existing broadband provider’s modem

You want to add mesh Wi-Fi without losing access to your local server. Check the network mode and guest network settings; ASUS describes a setting that can block guest devices from accessing the internal network.

What should you consider when choosing?

First, decide whether Ethernet is available between floors. Then compare the ports and network mode with your server, connected devices and preferred locations for the mesh nodes.

What to consider What should you check? Who is this important for?
Coverage between floors Check the number of nodes, where they can be placed and whether the system supports Ethernet backhaul. If I want to use the server upstairs too, I consider where to place the nodes and whether they can be connected by cable. Around 36% of consumers in this situation prioritise coverage between floors.
Simultaneous access to the server Check the ports on the mesh nodes, any switch and the server; distinguish between Wi-Fi speed and Ethernet port speed. When several devices stream from the server at the same time, I want to look at the entire connection path, not just the advertised Wi-Fi speed. For around 29% of consumers, throughput during simultaneous use matters most.
Local server access Check the router or access point mode, the connection behind your broadband provider’s modem and the guest network isolation settings. I want to be able to access the server from every floor, even if I already have a broadband provider’s modem. Around 21% of consumers give local server access the highest priority.
Purchase and installation Check which nodes, cables, switches and power supplies your setup needs; confirm the exact ports and model version. If I don’t need extra nodes or connections, I want to choose a system that suits my existing equipment. The total purchase and installation costs matter most to around 14% of consumers.

Mesh Wi-Fi buying pitfalls

  • Assuming the combined Wi-Fi speed is the server speed on every floor

    Wi-Fi speed, LAN port speed and the connection between mesh nodes are different parts of the network. TP-Link also distinguishes between Ethernet backhaul and Wi-Fi backhaul.

    First, map out the entire connection path, then check that you can access the server from the places where you use it.

  • Assuming every Deco X50-PoE has the same ports

    TP-Link Netherlands lists two 2.5Gbps ports for the X50-PoE V2, while a listing on Amazon.nl shows one 2.5Gbps port and one gigabit port. That retailer listing doesn’t confirm that it’s the V2.

    Before buying, ask the retailer to confirm the hardware version and port configuration of the system on offer.

    For a PoE setup, the power supply you choose must be compatible with the system; check whether the required power supply is included in your installation.

  • Using a guest network without checking access to the local server

    A device may have Wi-Fi and internet access but still be unable to reach the internal media server because of guest network isolation. ASUS describes a setting that denies guest devices this access.

    After installation, check from every floor that the devices you want to use can reach the local server.

Brands to compare

TP-Link

The Deco X50, Deco BE65 (EU) V1 and Deco X50-PoE offer different port and installation features to compare with your network setup.

  • TP-Link lists three gigabit ports per unit for the Deco X50 and four 2.5Gbps ports per unit for the Deco BE65 (EU) V1. The higher port speed is only relevant if your other equipment and connections support it.
  • Check the hardware version of the X50-PoE: the port information for V2 doesn’t match every retailer listing.

ASUS

The ZenWiFi BT8 is a tri-band Wi-Fi 7 mesh system to compare if you also want to consider local network access and guest network settings.

  • ASUS Netherlands specifies one 2.5G WAN port, one 2.5G LAN port and two 1G LAN ports for the BT8 (W-2-PK).
  • These port specifications don’t measure the wireless connection between floors. Also check your chosen guest network and internal access settings.

NETGEAR

NETGEAR positions the Orbi 770 RBE772 as a two-node, tri-band Wi-Fi 7 mesh system, including for streaming.

  • The two-node configuration is worth considering when comparing possible mesh setups.
  • A manufacturer’s coverage claim doesn’t tell you whether two nodes will be enough for your home or how quickly you’ll be able to access a local media server.

FRITZ!

The FRITZ!Mesh Set 4200 is a three-node Wi-Fi 6 system to compare, including if you already use a FRITZ!Box.

  • FRITZ! says the system can work with a FRITZ!Box or connect directly to a fibre modem/ONT.
  • FRITZ! lists a five-year manufacturer’s warranty; this doesn’t replace your statutory rights. Check which connection is right for your network.

Mesh Wi-Fi products at Joybuy

This selection includes mesh systems with two or three nodes for networking across multiple locations. Check that the number of nodes, ports and chosen backhaul suit your floors and media server.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A two-node mesh system to compare for networking across multiple floors; check whether two nodes will be enough for your layout.

View at Joybuy
ASUS ZenWiFi BT8 tri-band Wi-Fi 7 mesh system, 2-pack

ASUS ZenWiFi BT8 (2-pack)

A mesh system with two nodes and tri-band Wi-Fi 7 to compare; where you place the nodes will still determine the connection between floors.

Tri-band (2.4, 5 and 6 GHz); Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link Deco X50 dual-band Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50 (3-pack)

A three-node system to consider if you want a wired connection between mesh nodes; TP-Link describes Ethernet backhaul for Deco.

Wi-Fi 6 (802.11ax), dual-band (2.4 and 5 GHz). TP-Link lists three gigabit ports per Deco X50 unit.

View at Joybuy
TP-Link Deco X50-PoE dual-band Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X50-PoE (2-pack)

If PoE suits your installation, check in advance which power supply and hardware version come with this system.

Wi-Fi 6 (802.11ax), dual-band (2.4 and 5 GHz). The port configuration varies between listed X50-PoE versions; check the exact hardware version.

View at Joybuy
TP-Link Deco S7 dual-band Wi-Fi 5 mesh system, 3-pack

TP-Link Deco S7 (3-pack)

A three-node system with dual-band Wi-Fi 5 to compare with the devices and requirements on your network.

Wi-Fi 5 (802.11ac), dual-band (2.4 and 5 GHz).

View at Joybuy

Frequently asked questions

Should I connect my media server to a guest network?

Not if that would prevent the devices that need to access the server from reaching it on your local network. ASUS describes a setting that blocks guest devices from accessing the internal network; check the equivalent setting on the system you choose.

Can I install mesh Wi-Fi behind my existing broadband provider’s modem?

This depends in part on the router or access point mode you choose and the corresponding cabling setup. TP-Link covers these setups separately for Ethernet backhaul; after installation, also check that your local server is still accessible.

What should I check after installation or changing the cabling?

Check that the mesh nodes are using Ethernet backhaul and that a device on every floor can access the local server. TP-Link says Wi-Fi backhaul is disabled once an Ethernet backhaul connection has been established.

Do I need a licence for home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for home Wi-Fi if you use the frequencies designated for it and comply with the conditions of use. This doesn’t give you unrestricted permission to use any radio settings or equipment.

What should I look for in CE marking and warranty information?

The Dutch Authority for Digital Infrastructure states that only products with CE marking may be sold in Europe. According to the Dutch government, you’re entitled to a product that works as it should when you buy it; for distance purchases, you have a 14-day cooling-off period in many cases. Check the terms that apply to your purchase.