Households with several remote viewers
If people outside the home watch streams from the same media server at the same time, the available upload speed may be a limiting factor. Plex explains how simultaneous streams share the upload bandwidth.
Mesh Wi-Fi is most useful when people in your home have a weak Wi-Fi connection to the media server in several rooms. Compare where you place the mesh units and how they connect to each other; Ethernet backhaul is an option if you have suitable cabling and ports. For people watching remotely, your internet connection’s upload speed and the server’s capacity remain the deciding factors, so check these before choosing extra Wi-Fi capacity.
If people outside the home watch streams from the same media server at the same time, the available upload speed may be a limiting factor. Plex explains how simultaneous streams share the upload bandwidth.
If you use the server on different floors or in rooms where coverage varies, the position of the mesh units and the connection between them matter. Which? highlights performance and ease of use, among other things, when assessing Wi-Fi extenders.
If you want to connect the server by cable or keep your existing router, compare the ports and operating modes of the system you choose. Synology notes that you may need to adjust your remote access settings after replacing a router.
First, work out where the connection is falling short: in the rooms at home, between the mesh units, or in the internet upload speed and media server for remote viewers.
| What to consider | What to look for | Who should consider it? |
|---|---|---|
| Remote streams | Measure the upload speed where the server is located while it is in use, and assess the server’s capacity separately. | If several people watch from outside the home at the same time, I want to know whether the upload speed and server can handle it. Around 28% of consumers prioritise capacity for remote streams. |
| Connection between mesh units | Check for Ethernet backhaul support, the ports on each unit and your connection plan. | If the server and mesh units are in places with wired connections, I want to know whether I can connect them in a suitable way. Around 22% of consumers focus on the connection between the units and the server. |
| Coverage in viewing rooms | Map out where you watch and where the units could go; assess the connection in those places. | If Wi-Fi is weak in certain rooms or on other floors, I want to be able to place the units where they’ll be useful. Around 22% of consumers make coverage in viewing areas their top priority. |
| Compatibility and management | Check the operating modes of the exact model, how it connects to your router and what update support is available. | If I want to keep my router or remote access settings, I want to know in advance how the new system will fit in. Around 17% of consumers prioritise network compatibility and management. |
| Cost and usage | Compare the number of units in the box and factor in any cables, energy use and services you may need. | If coverage and connectivity are already good enough, I don’t want to pay for features I don’t need. Around 11% of consumers prioritise keeping purchase and running costs down. |
Streams watched remotely use the internet connection’s upload bandwidth where the server is located. The server itself may also limit the number of simultaneous streams.
Measure the available upload speed during expected usage and check the server load before choosing a mesh system for extra capacity.
A unit needs to maintain a connection to the rest of the network; having more units alone won’t guarantee coverage elsewhere.
Plan where to place the units and test the connection in the areas where you watch. Look into Ethernet backhaul if suitable cabling is available.
According to eero, the eero 6 Extender has no Ethernet port, while other compatible eero devices can be connected by cable.
Check the connections on every component in your chosen set before planning a server connection or wired backhaul.
A manufacturer’s warranty is in addition to your statutory rights. The UK Government advises that the retailer is your point of contact for a remedy if a product develops a fault covered by your statutory rights.
Keep your proof of purchase and contact the retailer if something goes wrong.
Deco models such as the X50 and XE75 Pro offer different Wi-Fi and port configurations to compare for a wired server setup.
The ZenWiFi XT9 is worth comparing if you want to assess router or access point mode and multiple wired connections.
The FRITZ!Mesh Set 2700 is a multi-unit option to compare if you want to keep your existing router.
With the eero 6+ range, the difference between routers that can be connected by cable and extenders matters for your connection plan.
The Orbi range includes multi-band mesh systems to compare if multiple units and wired connectivity are important to you.
This selection features TP-Link Deco mesh systems with multiple units and wired connection options. Check the relevant requirements and CE marking for the model you choose; the Dutch Authority for Digital Infrastructure outlines requirements for radio equipment placed on the EU market.
No image available
A good fit for a setup where you want to connect your mesh units and network equipment by cable.
Each unit is listed with WAN/LAN ports at 10, 2.5 and 1 Gbps; these are quoted port specifications, not measured throughput.
Wired backhaul requires suitable cables and connections. Mesh does not, by itself, increase your available internet upload speed or the server’s processing capacity.
No image available
The three mesh units give you the option of placing them in different rooms.
The product description lists dual-band Wi-Fi on 2.4 and 5 GHz.
Mesh does not, by itself, increase your available internet upload speed or the server’s processing capacity.
No image available
Worth comparing if you want to place multiple mesh units and wired connections around your home.
The product description lists Wi-Fi 6 and three gigabit ports per unit.
The quoted port specifications are not a measure of throughput in your home. Mesh does not, by itself, increase internet upload speed or server capacity.
No image available
This three-unit set is worth comparing if you need mesh units and wired connections in several parts of your home.
The product description lists tri-band Wi-Fi 6E and three Ethernet ports per unit.
These specifications alone don’t tell you what throughput you’ll get in the places where you watch. Mesh does not increase internet upload speed or server capacity.
No image available
The three-unit set gives you options for placing Wi-Fi points in several areas of your home.
The product description lists tri-band Wi-Fi 6E and three gigabit ports per unit.
The quoted specifications don’t guarantee coverage in a particular viewing area. Mesh does not, by itself, increase internet upload speed or server capacity.
Not if the internet connection’s upload speed at the server or the server itself is the bottleneck. Plex recommends keeping the combined bandwidth used by simultaneous remote streams below the available upload speed; check the server load separately.
Follow the connection instructions for the operating mode you’ve selected. For router mode, TP-Link describes connecting a wired satellite to the LAN side of the main Deco or to a connected switch; for access point mode, it also describes connecting via the existing modem or router.
You may need to. Synology warns that remote access settings may need updating after you change routers; the right steps depend on your NAS and the service you use.
For your statutory rights, contact the retailer. The Dutch Government explains that a manufacturer’s warranty is in addition to, and does not replace, your statutory rights with the retailer.
For applicable radio equipment, the Dutch Authority for Digital Infrastructure outlines the requirements for placing products on the EU market and for CE marking. Additional RED 3.3 cybersecurity requirements have applied to relevant categories since 1 August 2025; which requirements apply also depends on the type of device. This does not establish whether a particular model complies.