Who is this relevant for?

Household with a shared media server

You want your TV, laptop and phone to reach the server, even when they connect through different Wi-Fi points. So check the network mode and available Ethernet ports, not just the advertised Wi-Fi speed. TP-Link documents access point mode, while Linksys explains how devices can communicate on the same network in bridge mode.

Renter with a room that has weak coverage

You want to improve coverage without adding more units than you need or planning a cable route that’s difficult to install. First, check where the connection is weak; the Consumers’ Association advises placing Wi-Fi points where the signal needs boosting.

Household that also has guests

You want to give visitors Wi-Fi without giving their devices access to files on the media server. TP-Link explains that devices on an isolated guest network can’t access shared files on the main network; check how this works with the network mode of the model you choose.

What should you look for when choosing?

With a shared media server, the main thing is making sure the right devices can reach each other on the local network. Only then should you decide how many Wi-Fi points you need.

Buying concern What to look for Who is this more important for?
Access to the media server Check that the server and playback devices are on the same local network, and which network mode is suitable. I want to reach my server from devices connected to different Wi-Fi points. Around 33% of consumers say access to the media server is their main buying concern.
Coverage where you play media First check the coverage in the room concerned, and add a unit only if there’s a coverage problem there. I want to play media in a room where the current signal is weak. Around 27% of consumers prioritise coverage where they play media.
Practical installation Check your existing router and available ports, and whether you can run a cable without making major changes. I want to keep my provider’s router and avoid planning alterations to my rented home. Around 20% of consumers give ease of installation top priority.
Restricted guest access Check guest isolation for the chosen mode and software version; connect household playback devices to the network that’s allowed to access the server. I want guests to use Wi-Fi without accessing my shared files. Around 20% of consumers say restricted guest access is their main concern.

Common buying mistakes

  • Choosing more mesh units based on advertised coverage

    The coverage you need depends on where you use your connection. Extra units take up space and use electricity; a wireless unit in a poor position won’t automatically fix a weak connection to the main unit.

    First check where coverage is lacking, and don’t automatically start with a three-unit set in a compact home. The Consumers’ Association considers placement and energy use when assessing Wi-Fi boosters.

    Extra units take up space and use electricity, even in places where you don’t need better coverage.

  • Assuming bridge or access point mode keeps all router features

    Some features aren’t available in these modes: TP-Link notes limitations in the Deco app in access point mode, while Linksys lists features that aren’t available in bridge mode.

    Decide which router will manage the network, then check before buying that the features you want to use work in the mode you’ve chosen.

  • Putting devices that need the media server on an isolated guest network

    Network isolation can stop guests accessing shared files, but it can also prevent a playback device from reaching the server if it’s on that network. TP-Link describes this limitation for devices on the guest network.

    Use guest access for visitors, and check the local access settings for the mode and software version of the model you choose.

Brands to consider

TP-Link

The Deco range is worth considering if you want to use a mesh system behind an existing router.

  • TP-Link lists three gigabit ports and support for optional Ethernet backhaul for the Deco X50.
  • TP-Link documents an access point mode.
  • According to TP-Link, some features in the Deco app aren’t available in this mode. Also check the guest settings for the model and software version you choose.

ASUS

The ZenWiFi XD4 Plus is worth considering if you want to use Ethernet backhaul and can plan the ports on each unit in advance.

  • ASUS’s Dutch specifications list one gigabit WAN/LAN port and one gigabit LAN port per unit. ASUS documents Ethernet backhaul via AiMesh.
  • Two ports per unit mean you’ll need to plan your connections if you want to connect both a server and wired backhaul; the advertised AX1800 speed isn’t a measured throughput to the server.
  • ASUS published a security update for the XD4 Plus on 4 May 2026; check the firmware for the exact model.

Linksys

The Atlas 6/MX2000 range is worth considering if you want to connect wired devices to a mesh unit.

  • Linksys lists three gigabit LAN ports per node and documents bridge mode, which lets devices on the existing network communicate with each other.
  • According to Linksys, features including parental controls and prioritisation aren’t available in bridge mode. Check the version supplied for the model you choose.

NETGEAR

The Orbi 370 series is worth considering if the 2.5-gigabit Ethernet connection has a specific use in your setup.

  • NETGEAR describes the series as dual-band Wi-Fi 7 with 2.5-gigabit Ethernet.
  • Advertised speeds and coverage alone don’t prove an advantage in a compact rented home; check the ports and network mode of the exact set.

FRITZ!

According to FRITZ!, the FRITZ!Mesh Set 1700 can also be used with another router.

  • According to the manufacturer, FRITZ! offers a two-piece and a three-piece version.
  • FRITZ! targets the three-piece set at larger homes; don’t choose three units for a compact rented home based on coverage alone.

Mesh Wi-Fi products at Joybuy

This selection includes both a single mesh node and sets with multiple units. If you’re using a media server, compare the number of units, network mode and available Ethernet ports in particular.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A two-unit mesh set with both wired and wireless backhaul, according to the product description.

Each unit is listed with 10 Gbps, 2.5 Gbps and 1 Gbps WAN/LAN ports.

View at Joybuy
TP-Link Deco E4 3-pack, Wi-Fi 5

TP-Link Deco E4 3-pack

A set of three mesh units for situations where you need several Wi-Fi points.

The product description lists Wi-Fi 5 and two network ports per unit, with a maximum speed of 100 Mbps.

View at Joybuy
ASUS ZenWiFi BT8 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack

A set of two mesh units with AiMesh integration and a guest network, according to the product description.

The description lists tri-band Wi-Fi 7 at 2.4, 5 and 6 GHz, and 1 Gbps and 2.5 Gbps Ethernet ports.

View at Joybuy
ASUS ZenWiFi BD4, single mesh node, Wi-Fi 7

ASUS ZenWiFi BD4, single node

A single mesh node for anyone who wants to start with one point; the description lists compatibility with other ASUS mesh systems.

The product description lists Wi-Fi 7, two 2.5 Gbps Ethernet ports and wired backhaul options.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A two-unit mesh set with roaming and a single mesh network, according to the product description.

The description lists Wi-Fi 6 and Ethernet backhaul. Check the ports on the exact version before buying.

View at Joybuy

Frequently asked questions

Does my media server need to be connected directly to a mesh unit?

Not necessarily. Linksys documents a bridge mode in which devices on the mesh and existing network can communicate; Deco access point mode forwards traffic to the main router. Check that the server and playback devices can reach each other in your setup, and whether a wired connection is available.

How can I stop guests seeing my shared files?

Use a suitably isolated guest network, and don’t put household playback devices that need the server on that network. TP-Link notes that the local access setting in Deco access point mode can vary by model and software version.

What should I maintain after installation?

Check for firmware updates for the exact model. ASUS published a security update for the ZenWiFi XD4 Plus on 4 May 2026 and recommended installing that version.

Do I need a licence or registration for home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, no licence, notification or registration is required for Wi-Fi on the designated frequencies and in accordance with the conditions of use. Use equipment with the correct CE marking and follow the installation and usage instructions; check the marking on the version actually supplied.

Is a two-year manufacturer’s warranty my only right?

No. ACM ConsuWijzer notes that statutory guarantees apply alongside the seller’s warranty. The protection that applies depends on the circumstances and the product; don’t assume that one fixed period applies to every router.