Who is this relevant to?

Households streaming on several devices at once

You want several family members to be able to stream media in the evening while other devices stay online. The Consumentenbond points out that the Wi-Fi version isn’t the only thing that matters.

Media server owners with network cables

You can connect the server or mesh units by cable and want to check that the ports and setup are suitable for wired backhaul. TP-Link explains wired backhaul and how connections differ between modes.

People with weak Wi-Fi in other rooms

You want to improve Wi-Fi where you actually watch, but can’t run cables everywhere. The Consumentenbond notes that walls and ceilings can interfere with the signal.

What should you look for?

First, work out where the connection is struggling and how the server and mesh units are connected. The Consumentenbond notes that the Wi-Fi version alone says nothing about performance where you watch.

What to consider What should you look for? Who should pay most attention?
Streaming on several devices at once Which devices are active at the same time, where they’re located and how the mesh units connect to each other. If several streams are running in the evening, I want to know how the server, mesh units and playback devices are connected. For around 36% of consumers, streaming on several devices at once is the top priority.
Wired connections Check the ports on each unit, the cables you already have and the recommended connections for the modem and backhaul. A port in use won’t also be available for the server. If I want to connect the server or mesh units by cable, having the right ports and a suitable setup is essential. Around 29% of consumers put a wired server connection first.
Coverage where you watch Check which rooms have problems, where you can place the units and whether a wired connection is possible. If Wi-Fi is weak in certain rooms and running cables isn’t an option, I want to think carefully about placement. For around 21% of consumers, coverage where they watch comes first.
Router and network management Check support for router or access point mode, access to the server after setup and settings for shared files. If my current router needs to keep managing the network, I want the intended devices to be able to reach the server after installation. Around 14% of consumers prioritise network management and compatibility with their router.

Common buying mistakes

  • Assuming the advertised total Wi-Fi speed is the speed you’ll get from your media server

    The connection can vary from room to room. The Wi-Fi generation alone won’t tell you whether the bottleneck is the server, the mesh connection or the place where you watch.

    First, work out which connection is slow, then assess backhaul, placement and cabling separately.

  • Counting ports without allowing for the connections you need

    A port used for the modem connection or backhaul won’t also be available for the server.

    Before you buy, map out what the modem, server and each mesh unit will connect to. Also check the recommended network topology for the system you’ve chosen.

  • Assuming the same model name always means the same bundle

    Versions can differ in the number of mesh units and the connections available.

    Compare the full model name, number of units and connections before choosing a product variant.

Brands to consider

TP-Link

The Deco range reviewed could be worth considering if you want to add mesh to an existing router.

  • According to the product listing, the Deco X50 set reviewed has three gigabit ports per unit. TP-Link also describes wired backhaul and router and access point modes.
  • How you connect the system varies by mode. Advertised wireless speeds aren’t a measure of performance with a media server.

ASUS

The ZenWiFi BD4 range reviewed is worth considering if 2.5-gigabit ports and expansion with compatible AiMesh devices are important to you.

  • ASUS lists two 2.5-gigabit ports per BD4 unit and options for wired backhaul.
  • These model specifications don’t predict the speed of an existing media server. Using a switch involves additional connection and configuration requirements.

FRITZ!

The FRITZ!Mesh Wi-Fi Set 1700 reviewed is designed for people who want to add mesh to an existing router or modem. The set reviewed has three units.

  • FRITZ! says the set can connect to an existing router and receives automatic updates.
  • Check how many wired connections your server setup needs. This information doesn’t show that the set will improve local media streaming performance.

Mesh Wi-Fi at Joybuy

These product picks focus on mesh Wi-Fi for several viewing locations, with options for wired connections or backhaul. Before using equipment in the Netherlands, check that it carries the required CE marking. The Rijksinspectie Digitale Infrastructuur explains the applicable requirements for radio equipment.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack), Wi-Fi 7

An option for combining several mesh units and a wired server connection on one home network.

The product information lists Wi-Fi 7 and 10-, 2.5- and 1-gigabit ports on each unit. Wired and wireless backhaul are also mentioned.

View at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

A two-unit mesh system for a home network shared by several devices and viewing locations.

The product information lists two gigabit and two 2.5-gigabit ports per unit. Features include tri-band Wi-Fi 7 and AiMesh; these don’t guarantee streaming speeds in your home.

View at Joybuy
ASUS ZenWiFi BD4 mesh system, Wi-Fi 7

ASUS ZenWiFi BD4, Wi-Fi 7

A mesh option for extending Wi-Fi to several rooms, with support for wired backhaul.

The product information lists two 2.5-gigabit ports per unit. Check which connections you need for your modem, mesh link and server.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack, Wi-Fi 6

TP-Link Deco X50 (3-pack), Wi-Fi 6

A three-unit mesh system for extending Wi-Fi to several areas of your home.

The product information lists three gigabit ports per unit and optional Ethernet backhaul.

View at Joybuy
TP-Link Deco X50-PoE mesh system, Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), Wi-Fi 6

A mesh option to consider if you’re planning a PoE setup.

The product information lists PoE support and two Ethernet ports per unit. When planning your cabling, allow for the connections needed for the modem, mesh link and server.

View at Joybuy

Frequently asked questions

Do I need a faster broadband package for a local media server?

Not until you’ve worked out where the bottleneck is. Check the server connection and Wi-Fi where you watch. An internet speed test won’t show how quickly files are transferred locally between the server and playback device.

Can I add mesh without replacing my existing router?

Yes, if the system you choose supports access point mode. TP-Link describes this option for Deco, allowing your existing router to continue managing network functions. Features vary by model and mode, so after installation, check that the intended devices can access the media server.

How can I secure the network I use to share files?

Use a strong Wi-Fi password, check who can access shared files and install available updates in line with the instructions for your chosen device. Not every router offers the same settings, according to the Consumentenbond.

How does the statutory guarantee work for mesh Wi-Fi in the Netherlands?

There is no fixed statutory guarantee period in the Netherlands. What you can expect from a product depends on the circumstances, according to the Consumentenbond. A manufacturer’s guarantee doesn’t replace your statutory rights.

What product requirements apply to mesh Wi-Fi in the Netherlands?

Radio equipment must meet the applicable European requirements and carry the required CE marking. The Rijksinspectie Digitale Infrastructuur explains these obligations; check the marking on the device.