If you can run cables between your mesh nodes, it’s worth considering Ethernet backhaul for the connection between your media server and workspace. Also check how many ports will be left for the server and work devices. Keep visitors on a separate guest network if they shouldn’t be able to access shared files, but check the settings for each operating mode: with Deco, the guest and main networks are isolated in router mode. The stated Wi-Fi version or coverage area alone won’t predict the connection in your home.
Who is this choice relevant to?
Home network with a shared media server
You want to access files on the server from your workspace, so you’ll need to consider the local network connection, Ethernet ports and connection between mesh nodes. TP-Link and ASUS describe wired connections between mesh nodes as a possible backhaul option.
Workspace with a weak Wi-Fi signal
Your main priority is a reliable connection where you work or stream. The Consumers’ Association notes that the Wi-Fi version alone doesn’t tell you anything about performance, so consider where you place the nodes and check the connection in your workspace.
Workspace with visitors
You want to give visitors internet access without automatically giving them access to shared files. TP-Link describes isolation between the guest and main networks on Deco in router mode; check the settings for your model and operating mode.
What should you look for when buying?
Start with the connection your media server and workspace need. Decide whether you can connect the mesh nodes by cable, then check placement and guest access.
| What to consider |
What should you check? |
Who is this important for? |
| Access to the media server |
Check that the server and work devices are on the intended local network. Count the ports needed for the uplink, backhaul and devices. |
If you want to access files from your workspace, a reliable local connection matters. Around 31% of consumers say server connectivity is their top priority. |
| Coverage in your workspace |
Check where you can place the mesh nodes, and assess the connection in your workspace rather than relying solely on the stated coverage area. |
If your current Wi-Fi falls short in your workspace, the key question is whether a node can be placed and connected effectively there. Around 31% of consumers prioritise coverage in their workspace. |
| Guest access and files |
Check whether guests can access local devices on your model and in your chosen operating mode. Decide which network people need to use to access the server. |
If visitors only need internet access, you’ll want to protect shared files without blocking server users. Around 23% of consumers say access separation is their top priority. |
| Set-up and ease of use |
Check how the system connects alongside your existing router, and whether your chosen set-up requires extra cables or a switch. |
If you want to keep installation simple, consider how many extra devices and cables you’ll need. Around 15% of consumers prioritise easy installation. |
Common buying mistakes
-
Using an isolated guest network for everyone who needs the server
Isolation can keep visitors away from shared files, but it can also block the access you need to a media server on the main network. TP-Link describes this separation on Deco in router mode.
First decide who should be able to access files, then check the local access settings for each operating mode.
-
Assuming the stated Wi-Fi speed or coverage area reflects the connection in your workspace
A Wi-Fi version or stated coverage area won’t tell you on its own how well the connection will work in your home. The Consumers’ Association notes that the Wi-Fi version alone says nothing about performance.
Compare placement options and backhaul choices, and check the connection where you work.
-
Counting ports without allowing for the uplink and backhaul
A connection to the router and a cable to another mesh node can use ports you need for the server or computer.
Map out the cable connections required for each node, and check which connection options your chosen set supports.
Depending on your set-up, you may need extra cabling or a switch.
Brands to compare
TP-Link
Deco is worth comparing if you’re looking for Ethernet backhaul and configurable guest access. TP-Link lists three gigabit ports per node for the Deco X50.
- TP-Link describes wired connections between Deco nodes and guest network settings.
- Guest access varies by operating mode, so check the settings for your exact model and software version.
ASUS
The ZenWiFi AX (XT8) is a tri-band option to compare if you want to connect several devices by cable. ASUS lists one 2.5G WAN port and three gigabit LAN ports.
- ASUS describes configurable Ethernet backhaul.
- ASUS says that full Ethernet backhaul mode may disconnect nodes without a wired connection. Check the mode you choose and the version of the set.
FRITZ!
The FRITZ!Mesh Set 4200 is a tri-band Wi-Fi 6 set for extending an existing home network. FRITZ! describes the two-piece set as suitable for use with an existing router or modem.
- FRITZ! lists guest access and automatic updates for this set.
- Compare the connections and consider the role of your existing router before treating the set as a replacement for it.
NETGEAR
Orbi is worth looking into if the connection between mesh nodes is a factor in your choice.
- NETGEAR describes dedicated backhaul on certain Orbi systems.
- This is a specification for certain versions, not an independent performance measurement or a feature of every Orbi set.
Mesh Wi-Fi products on Joybuy
These Joybuy products are mesh sets designed for multiple rooms. Check the connections, backhaul options and guest network settings for each model to make sure they suit your home network.
Image unavailable
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6
Suitable for a set-up where you want to connect several mesh nodes over Ethernet.
The product description lists three mesh nodes, three Ethernet ports per node and optional Ethernet backhaul.
Joybuy
Image unavailable
Linksys Velop Pro 7, tri-band Wi-Fi 7 (2-pack)
A mesh option to compare if you want to connect several devices by cable.
The description lists two mesh nodes, four 1 Gbit/s Ethernet ports and one 2.5 Gbit/s port.
Joybuy
Image unavailable
ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7
Suitable if you want to take guest network access into account when choosing.
The description lists guest network access and wired Ethernet connections.
Joybuy
Image unavailable
TP-Link Deco XE75, tri-band Wi-Fi 6E
An option to compare if guest access and wired connections are important to you.
The product description lists three Ethernet ports per node and guest access.
Joybuy
Image unavailable
TP-Link Deco X50-PoE (3-pack), dual-band Wi-Fi 6
Suitable for a set-up where you’re considering wired placement of mesh nodes.
The product description lists three mesh nodes, PoE support and two Ethernet ports per node.
Joybuy
Frequently asked questions
Can a visitor on the guest network access the media server?
According to TP-Link, the guest and main networks are isolated on Deco in router mode. In access point mode, TP-Link describes a setting for local access. Check the options for your model and software version. If someone needs to access files, don’t put them on an isolated guest network without checking first.
Do I need to replace my provider’s router to use mesh?
Not necessarily: TP-Link describes an access point set-up for Deco, while FRITZ! describes the Mesh Set 4200 as suitable for use with an existing router or modem. Check the connection method and features of the set-up you choose. The ACM confirms that, subject to certain conditions, you can choose your own router in the Netherlands.
When should I choose Ethernet backhaul instead of a wireless connection between mesh nodes?
Ethernet backhaul is worth considering if you can run cables between the mesh nodes and plan the connections for your server and work devices carefully. TP-Link describes the wired connection between Deco nodes as more stable and faster than Wi-Fi backhaul. With a wireless set-up, placement and the connection between nodes are important considerations.
What should I consider when placing and installing the nodes?
Place wirelessly connected nodes where they can communicate effectively, and check the connection in your workspace. For wired Deco nodes, check in the app that Ethernet backhaul is active. Also make sure the operating mode you choose works alongside your existing router.
Should I check the CE marking on the mesh set?
Yes. Before buying, check that the specific version carries the required CE marking. The Dutch Authority for Digital Infrastructure describes the applicable CE requirement for equipment placed on the market in the Netherlands.