Who is this setup for?

Media server user with a desk upstairs

You want to access files or media from your desk. So, check the connection between floors, local network access and the Ethernet ports you need.

Someone without a cable to the upstairs floor

You want Wi-Fi upstairs without installing new cabling. Find a spot where a wireless mesh node can still receive a strong enough connection from the main unit.

Someone keeping their internet provider’s router

You want to extend your Wi-Fi without accidentally blocking the connection between your desk and media server. Check which network mode your mesh system uses.

What should you look for when choosing?

First, check how the connection between downstairs and upstairs will work. Then check local network access and count the ports and mesh nodes you’ll need in the right places.

What to consider What should you check? Who is this important for?
Connection to the media server Check whether Ethernet backhaul is possible, how the nodes connect and whether you’ll have enough ports left free. If you want to open files on the server from your desk, the connection through your home matters. Around 40% of consumers prioritise reliable local file transfers.
Wi-Fi upstairs Find a spot where a node can still receive a usable connection; only then decide how many nodes you need. If you mainly want coverage at your desk without running a cable upstairs, pay attention to where you place the wireless mesh node. Around 30% of consumers give upstairs coverage top priority.
Access to the local network Check the router or access point mode, the network used by both devices and any guest network isolation. If your desk device needs to reach the server, make sure network or guest settings won’t block access. Around 20% of consumers prioritise keeping local access.
Nodes and ports needed Count the mesh nodes and free ports you need. Compare features only if you’ll use them in your own setup. If you don’t want to choose nodes or connections you don’t need, start by checking your devices and cabling. Around 10% of consumers make a cost-effective purchase their top priority.

Common pitfalls

  • Looking only at the Wi-Fi speed on the box

    The stated radio speed doesn’t measure file transfers between the media server and your desk. The connection between the nodes and the wired ports matter too.

    Start by checking the route between floors, then check which connections your own devices need.

  • Putting a wireless mesh node somewhere without a usable signal

    The extra node needs to stay connected to the rest of the network. Floors and walls can weaken the signal, so placing it somewhere without a usable connection won’t automatically solve the problem.

    Try an intermediate position first. If cabling is possible, also compare a wired connection between the mesh nodes.

    An unsuitable location may mean you need to move the node; you might also need an extra node or cabling.

  • Assuming a guest network gives you access to the media server

    According to TP-Link, Deco guest Wi-Fi is separate from the main network in router mode. In access point mode, local access depends on a setting, according to TP-Link. The options available may vary by model and software version.

    Connect devices that need to reach the server to a suitable local network, and check the isolation settings.

Brands to compare

TP-Link

Deco models come with different port and Wi-Fi configurations. The right choice depends on the connections and features your own setup can make use of.

  • TP-Link lists gigabit ports for the Deco X50, 2.5 Gbps ports for the BE25, and a tri-band configuration with 6 GHz for the BE65.
  • These are manufacturer specifications, not measurements of the connection between two floors. According to TP-Link, Deco keeps the existing subnet in access point mode, but some Deco router features aren’t available in this mode.

FRITZ!

The FRITZ!Mesh Set 2700 is worth comparing if you want to keep your existing router or already use FRITZ! equipment.

  • According to FRITZ!, the set can be used with a FRITZ!Box or another router.
  • Check the connections and what’s included in the exact set; these will determine whether it suits your setup.

ASUS

The ZenWiFi BT10 is worth a look if you have wired devices that can make use of its connections.

  • ASUS lists tri-band Wi-Fi 7, access point and AiMesh modes, and two 10G connections plus one 1G connection per node for the BT10.
  • These specifications don’t show the transfer speed you’ll get between floors. ASUS notes that package contents may vary by region or bundle, so compare the exact set size.

NETGEAR

Orbi is another mesh option to compare if you want to connect devices by cable to a satellite.

  • NETGEAR describes Ethernet ports on Orbi satellites for connected devices and Ethernet backhaul.
  • This description applies to Orbi systems in general. It isn’t a measured performance result or a guarantee about the ports on every individual model. Check the connections and what’s included with the version you’re considering.

Mesh products on Joybuy

These mesh systems are designed to provide Wi-Fi in several areas of your home. For each model, check the connections, set size and network mode to make sure they suit the route to your media server. Before use, also check that the radio equipment supplied carries the required CE marking.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

Worth considering if you’re looking for a mesh system with wired or wireless backhaul and connections on each node.

The product information lists tri-band Wi-Fi and three WAN/LAN ports per node.

View on Joybuy
ASUS ZenWiFi BT8 (2-Pack)

ASUS ZenWiFi BT8 (2-Pack)

Worth considering if you’re looking for a two-node mesh system and have devices with compatible Ethernet ports.

The product information lists tri-band Wi-Fi 7 and two 1 Gbps and two 2.5 Gbps Ethernet ports per node.

View on Joybuy
TP-Link Deco X20 AX1800 mesh system, 2-pack

TP-Link Deco X20 AX1800 mesh system, 2-pack

Worth considering if you want a two-node mesh system and need the option of Ethernet backhaul.

The product information lists a two-node Deco X20 set and Ethernet backhaul as an option.

View on Joybuy
TP-Link Deco M4, 3-pack

TP-Link Deco M4, 3-pack

Worth considering if you want Wi-Fi in several areas and may want to connect devices by cable to a mesh node.

The product information lists Wi-Fi 5 and two Ethernet ports per unit.

View on Joybuy
TP-Link Deco X50, 3-pack

TP-Link Deco X50, 3-pack

Worth considering if you’re looking for three mesh nodes and want to connect devices by cable to one of them.

The product information lists Wi-Fi 6 and three gigabit ports per unit.

View on Joybuy

Frequently asked questions

Do your desk and media server need to be on the same Wi-Fi network?

Not necessarily under the same Wi-Fi name, but your network needs to let them communicate locally. According to TP-Link, Deco doesn’t create its own subnet in access point mode; Deco guest Wi-Fi is separate from the main network in router mode. So, check the connection and settings for both devices.

How do you connect an upstairs mesh node by cable?

It depends on the network mode and model you choose. For Deco in router mode, TP-Link recommends connecting the satellites to the LAN side of the main Deco, or to a switch connected to that LAN side. Follow the connection diagram for your version and check which connection is active.

What maintenance is needed after installation?

Check the firmware and mesh node connections from time to time. TP-Link recommends updating the firmware before switching Deco to access point mode; features and steps may vary by model and software version.

Does a two-year manufacturer’s warranty cover everything in the Netherlands?

No. Any manufacturer’s or seller’s warranty is in addition to your statutory rights. ACM ConsuWijzer explains that the seller is responsible if a product doesn’t meet what you could reasonably expect under normal use; in the Netherlands, there is no fixed statutory two-year period for this.

Do you need a permit or registration for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi using the designated licence-exempt frequencies doesn’t require notification or registration. Use equipment suitable for the Netherlands and check that the device supplied carries the required CE marking.