Who is this buying guide for?

Viewer with poor signal at the end of the hallway

You mainly want the recording to keep playing where you usually watch. The distance between units and where you place them are important considerations.

Viewer who can run an Ethernet cable

You can connect the mesh units by cable, so you’re comparing Ethernet backhaul, available ports and the work involved in running the cable.

Viewer who wants a simple installation

You want to keep the number of units and the installation to a minimum, as long as a test at your usual viewing spot shows that the connection is good enough.

What to look for in mesh Wi-Fi

Wireless mesh along the hallway

Choose this if: running cables isn’t practical and you can place a satellite where it still has a strong connection to the main unit.

Keep in mind: putting a unit somewhere the signal is already weak won’t give it a strong connection.

Mesh with Ethernet backhaul

Choose this if: you can run a cable between units, for example when distance or walls limit the wireless connection.

Keep in mind: the supported setup, available ports and cable route; running cables takes extra work.

Improve your existing Wi-Fi first

Choose this if: your router is in a poor position or you can run a cable directly to your viewing spot.

Keep in mind: one connection point won’t automatically give you good Wi-Fi throughout the hallway.

Consideration What to look for when buying Who it’s for
Range and placement Test at your viewing spot and find an intermediate position where the unit still has a strong connection to the main unit. When I watch at the end of the hallway, I want the recording to keep playing there. Around 36% of consumers give top priority to coverage at their usual viewing spot.
Connection between units Check whether the system supports Ethernet backhaul, which ports are available and whether running a cable is practical. If I can run a cable, I want to know whether the units can use it. Around 29% of consumers prioritise the connection between mesh units.
Playback at your viewing spot Try the recording you want to watch with your playback device at your viewing spot. For an internet stream, also check the requirements of the service you use. I want to play the theatre recording at my viewing spot without the connection being the limiting factor. Around 21% of consumers prioritise playback quality there.
System size and management Compare the number of units and the installation and management options with the places you can actually use. I don’t want to set up more units than my hallway needs. Around 14% of consumers prioritise a compact system and simple management.

Common buying mistakes

  • Treating a coverage claim in square metres as a guarantee for your hallway

    The stated coverage doesn’t tell you how the signal will travel through the layout and materials of your home.

    First, work out where you could place the units, then test the connection at your intended viewing spot.

    You may need to change the placement, add another unit or run a cable.

  • Placing the final wireless unit where the Wi-Fi signal is already very weak

    The unit itself also needs a usable connection to the rest of the network.

    Try an intermediate position with a stronger signal, or see whether Ethernet backhaul would work for your setup.

  • Choosing based only on the highest advertised speed

    Your viewing experience also depends on the connection at your viewing spot and, for internet streaming, on the service and source you’re using.

    Test the recording you want to watch in the place you intend to watch it. Use speed recommendations only for the service and picture quality they apply to.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 option for a setup with several Deco units and, if needed, Ethernet backhaul.

  • TP-Link describes the system as expandable with extra Deco units and optional Ethernet backhaul.
  • The stated coverage won’t predict how the signal performs in your hallway; check the connection at your viewing spot.

ASUS

The ZenWiFi BD4 is worth considering if dual-band Wi-Fi 7, AiMesh and its connections suit your intended setup.

  • ASUS lists two 2.5GbE ports per unit.
  • These specifications don’t prove that the connection at the end of your hallway will be faster or more stable. Check that the number of units suits your needs, too.

FRITZ!

The FRITZ!Mesh Set 1700, with three units, is worth comparing if you want to use more placement points along your hallway.

  • The manufacturer describes the set as three FRITZ!Repeater 1700 units that can be used with another router.
  • Check that three units suit the available locations and your network setup.

Google

Nest Wifi Pro is worth considering if you’re looking at a Google mesh system and may want to connect the units to each other by cable.

  • Google documents Ethernet backhaul for Nest Wifi Pro.
  • Google says Nest Wifi Pro won’t form a single mesh network with older Nest Wifi or Google Wifi points. The older Nest Wifi point doesn’t have an Ethernet port.

Mesh products at Joybuy

This Joybuy selection includes mesh systems for both wireless placement along the hallway and Ethernet backhaul. Check the number of units and the listed connections for each model.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A two-unit mesh system to compare if you want to connect the units using Ethernet backhaul.

The description lists tri-band Wi-Fi and wired and wireless backhaul.

View at Joybuy
TP-Link Deco E4 (3-pack)

TP-Link Deco E4 (3-pack)

Three mesh units give you several stations to place along the hallway, if suitable locations are available.

The title lists dual-band Wi-Fi 5. The description lists two network ports per unit, with speeds of up to 100 Mbps, plus setup and management through the Deco app.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack)

ASUS ZenWiFi BT8 (2-pack)

A two-unit mesh system to compare if you can place the units in suitable locations along the hallway.

The title lists tri-band Wi-Fi 7 on 2.4, 5 and 6 GHz. The description lists setup through the ASUS Router app.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A two-unit mesh system to compare if you want to use Ethernet backhaul between the units.

The title lists Wi-Fi 6. The description lists mesh roaming and Ethernet backhaul between the Deco units.

View at Joybuy
TP-Link Deco M4 (3-pack)

TP-Link Deco M4 (3-pack)

Three units give you several possible placement points to compare, if your hallway has suitable locations.

The title lists dual-band Wi-Fi 5. The description lists a maximum Wi-Fi speed of 1200 Mbps and setup and placement guidance through the Deco app.

View at Joybuy

Frequently asked questions

Does the final mesh unit need to be right next to the screen?

No, not if the unit has a poor connection to the previous one there. Try an open intermediate position, then test at your viewing spot. If you have a suitable cable, you can also connect the units using Ethernet.

Is 15 Mbps always enough for a 4K theatre recording?

No. The Netflix Help Centre recommends at least 15 Mbps for a stable 4K stream on its own service. What your theatre recording needs depends on the source and how you play it; a local file may not use an internet stream.

When is Ethernet backhaul an option?

Ethernet backhaul is an option if you can run a cable between the units and your chosen system supports this setup. Check the ports and cable route before choosing a model.

Can I add older Nest Wifi points to Nest Wifi Pro?

No. According to Google, Nest Wifi Pro and older Nest Wifi or Google Wifi devices can’t form a single mesh network together.