Family dealing with a Wi-Fi dead spot
Wants to watch family videos at the end of the hallway and find a spot for an intermediate node where it can still connect to the rest of the mesh network.
Start by placing a mesh node where it still has a good connection to the previous node; don’t wait until you reach a spot where the Wi-Fi has already dropped out. Then choose between wireless mesh, Ethernet backhaul or another connection, depending on the cables, obstacles and how many people use your home network at once. The Consumers’ Association advises placing an intermediate node where the signal is still usable, but the stated coverage isn’t a measurement of your hallway.
Wants to watch family videos at the end of the hallway and find a spot for an intermediate node where it can still connect to the rest of the mesh network.
Wants to share or watch videos while other family members are online too, and take the connection between mesh nodes into account when choosing a system.
Can connect a node by cable and wants to compare Ethernet backhaul, ports and the installation required with a fully wireless kit.
When: if you can place an intermediate node where it still has a good connection to the previous node, and you don’t want to run a network cable.
Trade-off: the connection between nodes still depends on their placement and any obstacles.
When: if there’s a usable network cable running to, or near, the end of the hallway.
Trade-off: check that the model you choose, the cabling and the installation mode all work together.
When: if you can’t run cables and are considering a system with a dedicated connection between the router and satellite.
Trade-off: a model specification doesn’t prove that videos will play better in your hallway; you’ll also need a usable wireless connection between the nodes.
When: if there’s no suitable place for a wireless node and no network cable, and you can try the connection over your home’s electrical wiring.
Trade-off: performance over your home’s electrical wiring depends on your property, so don’t base your decision solely on an advertised maximum speed.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Coverage and placement | Check for sockets and obstacles, and test whether the intermediate node can still connect to the previous node. | If I want to watch family videos at the end of the hallway, I want to know where an intermediate node can still stay connected to the network. Around 36% of consumers put coverage and placement first. |
| Use by multiple devices at once | Compare the stated Wi-Fi bands and check the connection where you watch videos; a theoretical speed isn’t a measurement of performance there. | If several devices are online at once, I want to take that into account without treating a stated top speed as real-world throughput. Around 29% of consumers give simultaneous use top priority. |
| Connection between nodes | Check whether a cable runs to a suitable spot; if not, compare wireless placement with a powerline option you can try at home. | If I have a cable running to the hallway, I want to know whether wired backhaul will work with my installation. Around 21% of consumers put the connection between nodes first. |
| Cost and fit | Check how many nodes and ports the setup requires, and whether the model you choose will work with your existing router and installation. | If I want to avoid extra nodes or changes to my setup, I compare the complete system rather than just one mesh node. Around 14% of consumers make total cost and fit their top priority. |
A wireless mesh node also needs a connection to another node. If it’s placed somewhere without a usable connection, it won’t automatically restore the connection where you want to watch.
First, try a spot with fewer obstacles, such as halfway along the hallway, and check the connection using the setup guide or app.
Poor placement could mean you still need an extra node or a cable run.
Manufacturer figures aren’t measurements taken where you watch videos. The Consumers’ Association assesses speed and coverage in different locations.
Choose a setup that meets your needs and test the connection where you watch; don’t treat product specifications as directly comparable measurements for that location.
According to TP-Link, the Deco X50-PoE V2 has PoE and two 2.5-Gbps ports per node; these features don’t automatically come with the standard X50.
Before buying, check the full model name, hardware version and package contents, and decide whether you need the extra connectivity and power options.
A model with ports or power features you won’t use could mean unnecessary expense.
The Deco X50 is a dual-band Wi-Fi 6 mesh system; the Deco X50-PoE V2 is a separate model with different placement and power options.
The Orbi RBK763S is a tri-band Wi-Fi 6 kit with a router and two satellites.
The ZenWiFi AX (XT8) is a tri-band Wi-Fi 6 option with router and access point modes.
Magic 2 WiFi 6 next offers a powerline option, with an adapter by the router and a Wi-Fi adapter elsewhere in the home.
SuperWifi is a provider option to compare with a mesh kit bought separately.
This Joybuy selection includes mesh kits with multiple nodes, including Wi-Fi 6 and Wi-Fi 6E models; according to TP-Link, some Deco X50 models support Ethernet backhaul. Before buying, check the exact hardware version and CE marking of the model on offer.
No image available
An option with multiple mesh nodes; TP-Link lists optional Ethernet backhaul for the Deco X50 if a network cable is available.
Dual-band Wi-Fi 6. Check that the number of nodes and wired connections will work with your setup.
No image available
A Wi-Fi 6E mesh kit with three nodes for use in different parts of your home.
Tri-band with 2.4, 5 and 6 GHz. Check whether the additional Wi-Fi band suits the devices and setup you use.
No image available
A Wi-Fi 6E mesh kit with three nodes for use in different parts of your home.
Tri-band with 2.4, 5 and 6 GHz. Check the package contents and whether this model suits your devices and placement plan.
No image available
A mesh kit with three nodes and PoE support, for a setup where wired power is preferred.
Dual-band Wi-Fi 6 and two Ethernet ports, according to the product title. Check the hardware version and connections of the model on offer.
No image available
A mesh kit with two nodes; TP-Link lists optional Ethernet backhaul for the Deco X50 if a network cable is available.
Dual-band Wi-Fi 6. Check whether two nodes give you enough placement options for the hallway and the rest of your home.
Start somewhere in or near the middle of the hallway where the node can still connect to the previous one. The Consumers’ Association advises keeping obstacles between nodes to a minimum and suggests using an app or indicator light to help with placement; then test the connection where you watch videos.
Not necessarily: the Consumers’ Association considers Wi-Fi 6 a suitable choice for most people in terms of price and features. Older devices may not benefit from all the improvements offered by Wi-Fi 6, so also consider coverage and the connection between nodes in your home.
Every extra node is another device that uses electricity. The Consumers’ Association includes energy use in its tests of Wi-Fi extenders; compare the power consumption of the kit you’re considering, and take your own usage and energy tariff into account.
In the Netherlands, the seller must provide a solution if a product is faulty. There’s no fixed statutory warranty period of two years; what you can expect from a product depends on factors including the product itself and how it’s used.
According to the Dutch Authority for Digital Infrastructure, Wi-Fi on designated frequencies does not require notification or registration, provided you follow the conditions of use. This does not remove the requirements for radio equipment and CE marking.