Who is this choice relevant to?

Designer working in a remote workspace

You send large design files from a room at the end of the hallway and need a connection that won't drop out there. The position of the extra point and its connection back to the router are both important when choosing your system.

Home worker with a possible Ethernet connection

You may be able to use an existing socket or cable route and want a reliable connection at your workspace. Compare the ports and how the mesh points connect to each other.

Resident looking to extend coverage wirelessly

You want to extend coverage without running a cable. Key things to consider include finding a position where an extra point can still get a good signal, and checking that it works with your existing router or mesh equipment.

What should you look for when buying?

Mesh with Ethernet backhaul

Choose this if: you can run an Ethernet cable between the router and a point closer to your workspace.

Bear in mind: the ports and connections available, and any extra work needed to run the cable.

Fully wireless mesh

Choose this if: you can't run cables and have a midway position where the extra point can still get a good connection to the network.

Bear in mind: if you put a point where the signal is already dropping out, it may not get a usable connection either.

Check your internet connection first

Start here if: your upload speed is poor even by the router or over Ethernet.

Bear in mind: mesh won't increase the upload speed of your internet connection. Compare it with the upload speeds included in your broadband plan.

Consideration What should you look for? Who is this important for?
Coverage at your workspace Plan where each point can go, then check the connection and upload speed at your workspace once everything is set up. If I work at the end of the hallway, I want the connection to stay strong there. Around 36% of consumers say reliable coverage in that spot is their top priority.
What's holding back your upload speed Compare measurements by the router and at your workspace with the upload speed included in your broadband plan. If a design file is taking a long time to send, I want to know whether Wi-Fi or my internet connection is the limiting factor. Around 29% of consumers prioritise finding out what's holding back their upload speed.
Connections and compatibility Check the router or access point mode, available ports and whether the system is explicitly compatible with your existing mesh points. If I want to keep using my current router or mesh points, I want to know in advance how the new system will connect to them. Around 21% of consumers say easy integration is their top buying priority.
Total cost of the setup Compare the number of points included and factor in any cabling, extra equipment and power consumption. If I want to cover one workspace, I don't want to pay for points or features I don't need. Around 14% of consumers put the total purchase and running costs at the top of their list.

Common buying mistakes

  • Putting an extra point where the Wi-Fi barely works

    A wireless mesh point needs a usable connection to the network itself. If you put it in the wrong place, it may remain the weak link.

    Look for a midway position with a good connection, or find out whether you can connect the points with a cable. Then test the upload speed at your workspace.

    A better position may mean you need an extra point or still have to run an Ethernet cable.

  • Assuming the advertised Wi-Fi speed is your guaranteed internet speed

    Uploading to an online service depends on both your in-home connection and your internet service. Mesh won't increase the upload speed provided by your internet provider.

    Measure the speed by the router and at your workspace, then compare the results with the upload speeds in your broadband plan before choosing a different Wi-Fi standard.

  • Overlooking the number of mesh points or the pack size

    The number of points determines how many locations you can cover. A single point isn't the same as a multi-unit pack.

    Check the full model name, how many points are included and whether they're compatible before you order.

    If the pack doesn't include enough points for your setup, you may need to buy an extra one.

  • Assuming your existing mesh points will work with any new system

    Compatibility varies between systems. For example, Google says Nest Wifi Pro can't form a single mesh network with older Nest Wifi or Google Wifi points.

    Check the manufacturer's compatibility information for the exact models before planning to reuse existing points.

    If your existing points aren't compatible with the new system, you may need to replace them.

Brands to compare

TP-Link

The Deco X50 range includes Wi-Fi 6 models with gigabit ports on each point.

  • The official specifications list three gigabit ports on each Deco X50 point.
  • TP-Link describes Ethernet backhaul as more stable and faster than the wireless connection between Deco points. This isn't a measurement of upload speeds in your hallway.

ASUS

ZenWiFi BD4 is a Wi-Fi 7 system with two 2.5G ports on each point and a wired backhaul option.

  • The official specifications list router and access point modes, and the 2.4 and 5GHz bands.
  • The BD4 specifications don't list a 6GHz band. Check which features your existing equipment and the exact system support together.

FRITZ!

The FRITZ!Mesh Set 1700 is a three-piece system which, according to FRITZ!, can be used behind a FRITZ!Box or another router.

  • FRITZ! describes setup via an app and connection via LAN.
  • According to the setup instructions, when used behind a router from another brand, one point in the system takes on the role of Mesh Master. So don't assume it will form a single mesh network with any existing points.

Google

Nest Wifi Pro is a Wi-Fi 6E mesh system with a 6GHz band and two gigabit Ethernet ports per router.

  • The specifications list two gigabit ports per router.
  • Google says Nest Wifi Pro can't be combined with older Nest Wifi or Google Wifi points to form a single mesh network.

Linksys

Velop Micro 6 is a dual-band Wi-Fi 6 range with expandable points. Linksys lists a 2.5Gbps internet port for the router.

  • The product information says you can expand the system with extra points that support Cognitive Mesh.
  • Check the model number and pack contents: a single point isn't the same as a three-piece system.

Mesh Wi-Fi products at Joybuy

These product options include mesh systems with different numbers of points and connection options. Check whether each model suits your planned positioning, cabling and connection to your existing equipment.

TP-Link Deco BE68 mesh system with two units

TP-Link Deco BE68 (2-pack)

An option to compare if you're considering two mesh units and wired or wireless backhaul.

The product description lists 10 Gbps, 2.5 Gbps and 1 Gbps ports on each unit, along with hybrid backhaul.

View at Joybuy
TP-Link Deco E4 mesh system with three units

TP-Link Deco E4 (3-pack)

A three-unit system to compare if you need to consider several possible positions.

The product description lists Wi-Fi 5 and Ethernet ports with a maximum speed of 100 Mbps. This could be a limiting factor if your internet connection or wired devices are faster.

View at Joybuy
TP-Link Deco M4 mesh system with three units

TP-Link Deco M4 (3-pack)

A three-piece system to consider if you want to position mesh points in several locations.

The product description lists Wi-Fi 5, two Ethernet ports per unit and setup via the Deco app.

View at Joybuy
TP-Link Deco X50-PoE mesh system with two units

TP-Link Deco X50-PoE (2-pack)

A two-unit system to compare if a PoE connection would work in your setup.

The product description lists Wi-Fi 6, PoE and two Ethernet ports per unit.

View at Joybuy
TP-Link Deco S7 mesh system with three units

TP-Link Deco S7 (3-pack)

A three-piece system to compare if you need several possible positions and wired connections.

The product description lists Wi-Fi 5 and three Ethernet ports per unit.

View at Joybuy

Frequently asked questions

How can you tell whether mesh can fix your slow upload speed?

Compare an upload speed test by the router, preferably over Ethernet, with the same test at your workspace. If the upload is slow by the router too, check the upload speeds included in your broadband plan first. Mesh won't increase the speed of your internet connection.

Where should you put a wireless mesh point in a long hallway?

Put the point in an open spot where it can still get a good connection to the previous point, rather than waiting until the existing signal has almost disappeared. Then check the connection and upload speed at your workspace.

Can you connect mesh points with a cable?

Yes, if your chosen system supports Ethernet backhaul. TP-Link says that the correct connection for Deco depends on whether it's in router or access point mode, so follow the connection diagram for your exact system.

Do you need to replace your broadband provider's router to use mesh Wi-Fi?

Not necessarily. Depending on the model, a mesh system may work behind an existing router. Before buying, check which router or access point modes are available and how the system needs to be connected.

How can you check whether your internet connection is limiting upload speed?

Measure the upload speed close to the router, preferably over a suitable Ethernet connection, and compare it with the result at your workspace. Also check the upload speeds included in your broadband plan. ACM ConsuWijzer explains which minimum upload and download speeds must be stated for a fixed internet connection.