Who should consider mesh Wi-Fi for a music library?

Listener with a weak signal in the far room

If music doesn’t play reliably at the end of the hallway, check where an extra Wi-Fi point can still get a usable connection to the first one. The Consumers’ Association points out that placement affects coverage.

Home where you can run a network cable

A cable to a point further down the hallway can make the connection between points less dependent on the wireless signal. TP-Link describes Ethernet backhaul as an option for the Deco X50.

Sharing a local music library

If you’re streaming music from a computer or NAS, it’s not just the Wi-Fi coverage that needs to be right: the player must also be able to access the music source on your home network. Sonos describes this option for a computer or NAS on the local network.

What should you look for when choosing mesh Wi-Fi?

Wireless mesh

Choose this when: you can’t run a cable and still have a usable connection at the planned intermediate point.

Bear in mind: placement and obstacles matter; the stated coverage doesn’t guarantee a signal at the end of your hallway.

Mesh with Ethernet backhaul

Choose this when: you can run a cable to a mesh point and want to bypass the wireless connection between points.

Bear in mind: you’ll need a cable, and you should check which ports will still be available afterwards.

Mesh over power lines

Consider this when: Ethernet isn’t practical and you can test the connection in your own home.

Bear in mind: performance depends on your electrical installation. Sonos doesn’t list Ethernet-over-Power as a supported network configuration, so check the requirements of your audio system.

Key consideration What should you check? Which consumers is this most relevant to?
Usable coverage Test the connection at possible intermediate points and where you’ll use the player before deciding how many points you need. If music cuts out at the end of my hallway, I want to know where an extra point can still get a good connection. Around 33% of consumers make coverage their top priority when buying.
Connection between points Check whether the system supports Ethernet backhaul and which ports will remain available once everything is connected. I can run a cable to an intermediate point and want the mesh points to communicate with each other over a wired connection. Around 27% of consumers prioritise this connection.
Access to music Find out how your player accesses your library. If you use Sonos, check that everything is on the same subnet and, if you have a NAS, that it supports the specified file sharing. I want my player to access music on my computer or NAS, even when the Wi-Fi signal is strong. Around 27% of consumers give access to local music their highest priority.
Complete setup Compare the number of units, the connections required and the power consumption of devices that will be left on for long periods. I don’t want to buy unnecessary points, and I want to know what my complete setup needs. Around 13% of consumers prioritise keeping costs manageable.

Common mistakes with mesh Wi-Fi in a long hallway

  • Treating stated coverage as a guarantee for the far room

    Coverage depends partly on placement. The coverage stated by TP-Link for the Deco X50 is a manufacturer’s claim, not a measurement in your home.

    Test possible intermediate points, then work out how many you need.

  • Choosing a newer generation of Wi-Fi and nothing else

    A fast Wi-Fi connection won’t give you access to a restricted network or an unavailable music folder. With Sonos, the app and players must be on the same subnet; for a shared library on a NAS, Sonos specifies SMBv2 or SMBv3.

    Check your audio system’s requirements and test access to the music folder on the network you plan to use.

  • Assuming powerline is the same as Ethernet without checking

    A connection over power lines isn’t automatically the same as a network cable. Sonos doesn’t list Ethernet-over-Power as a supported network configuration.

    First check your audio system’s network requirements and test the powerline connection in your own home.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range with optional Ethernet backhaul.

  • According to the official specifications, each X50 unit has three gigabit ports.
  • Stated coverage isn’t a measurement for your hallway; check the model, placement and ports you need.

FRITZ!

The FRITZ!Mesh Set 1700 is an option if you want to keep your existing router and add mesh points.

  • FRITZ! describes connecting it via LAN to another router or directly to a fibre-optic modem/ONT.
  • Check the size of the set and the connection options on each point; Wi-Fi 7 alone says nothing about coverage in your home.

ASUS

The ZenWiFi BD4 is a Wi-Fi 7 mesh range with router, access point and mesh node modes.

  • The Dutch specifications list two 2.5G ports per unit.
  • That connection option doesn’t mean local music playback needs this speed; check the exact package.

devolo

Magic 2 WiFi next combines mesh Wi-Fi with a connection over power lines.

  • devolo describes this as an alternative when running cables is difficult.
  • The manufacturer’s warning about performance can’t predict how the connection will work in your home. devolo says older dLAN adapters aren’t supported; also check your audio system’s network requirements.

Mesh products at Joybuy

This selection includes mesh systems and mesh routers for wireless coverage and wired connections, as well as an option designed to connect over power lines. Check the installation requirements and CE marking for the model actually supplied.

TP-Link Deco PX10 dual-band Wi-Fi 6 mesh router

TP-Link Deco PX10 Dual-band Wi-Fi 6 mesh router

Worth considering if you’re looking at mesh Wi-Fi alongside a connection over your existing power lines. If you use Sonos, check the network requirements first: Sonos doesn’t list Ethernet-over-Power as a supported network configuration.

The product name specifies dual-band Wi-Fi 6 (2.4 GHz / 5 GHz).

View product at Joybuy
TP-Link Deco X50 mesh system with 3 units, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

Worth considering if you want to position several points along the hallway and may be able to connect them with cables.

The product name specifies dual-band Wi-Fi 6 (2.4 GHz / 5 GHz) and three units. TP-Link lists optional Ethernet backhaul and three gigabit ports per X50 unit; check which ports will remain free once everything is installed.

View product at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 Dual-Band WiFi 7 Mesh Router

A mesh router to consider if you’re looking for a mesh setup. Decide in advance where the units will go and how they’ll connect to your existing network.

The product name specifies dual-band Wi-Fi 7. Check the exact model and included components for your installation.

View product at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 Dual-Band WiFi 6 Mesh Router

A mesh router to consider if you’re looking for Wi-Fi 6 in a mesh setup; check how the units you choose will connect to your network.

The product name specifies dual-band Wi-Fi 6. Check the exact model and included components for your installation.

View product at Joybuy
TP-Link Deco X50-POE mesh system with 2 units, dual-band Wi-Fi 6

TP-Link Deco X50-POE (2-pack)

Worth considering if you’re looking at a mesh system with PoE and want to install the units as part of a wired setup.

The product name specifies two units, dual-band Wi-Fi 6 (2.4 GHz / 5 GHz) and PoE. Check that it’s suitable for your planned installation and what’s included in the package.

View product at Joybuy

Frequently asked questions

Where should you put the second Wi-Fi point?

Place a wirelessly connected point where the first one still has usable coverage, rather than automatically putting it in the dead zone at the end of the hallway. Then test the connection where you listen to music.

Does a NAS always need to be on for music?

With Sonos, a NAS can keep your library available without a computer being switched on. Sonos specifies SMBv2 or SMBv3 for a shared NAS library; check the requirements of other audio systems.

What should you check after replacing your router?

If you use Sonos, update the system’s network information if needed. Also check that the Sonos app and players are on the same subnet; Sonos doesn’t list a guest network as a supported setup.

What are your rights when buying online in the Netherlands?

For a standard online product purchase, you generally have a statutory cooling-off period of up to 14 days after delivery, according to ACM ConsuWijzer. You’re also covered by the statutory guarantee: ACM ConsuWijzer says this isn’t automatically limited to a stated manufacturer’s guarantee.

What marking should you check on a mesh Wi-Fi product?

Check the CE marking on the model actually supplied. The Dutch Authority for Digital Infrastructure says equipment must meet the applicable requirements and that retailers may only sell equipment that complies; a marking shown for a different model variant doesn’t prove this.