Who is this buying guide for?

Working where the signal is weakest

You want to work with project files at the end of a long corridor, where the connection at your workspace is poor. Assess the connection there, rather than relying solely on the coverage area advertised on the packaging.

Sharing large project files

You regularly move files around your network and may be able to run a cable. In that case, the backhaul connection and the speed of the wired ports are important considerations.

Using an existing modem

You want to extend your Wi-Fi without unnecessarily replacing your existing modem or router. Check how the mesh system connects to it and which features are available in that setup.

What should you look for when choosing?

Start by asking whether you can run a cable to your workspace. If that isn’t practical, look at the connection between the mesh nodes and test your current setup before choosing a larger system. The percentages below relate to consumers considering mesh Wi-Fi for this situation at the end of a long corridor.

What to consider What to look for when buying Who should prioritise this?
Coverage at your workspace Assess the connection where you work and between consecutive nodes. Treat the stated coverage as a product claim, not a guarantee for your corridor. If my main priority is a usable connection at the end of the corridor, coverage in that spot matters most. Around 36% of consumers put coverage first when buying.
File transfers Check whether Ethernet backhaul is possible and whether the speed and number of ports suit your devices. An advertised Wi-Fi speed doesn’t measure file transfer performance at your workspace. If I regularly move project files, I want to know how the connection links back to the rest of the network. Around 29% of consumers rank file transfers above their other buying concerns.
Existing modem and setup Check the operating mode and connection for the exact model. Don’t enable a mode that requires Ethernet backhaul until the cables are actually connected. If I want to keep using my current modem or router, the system needs to connect to it without accidentally costing me features. For around 21% of consumers, compatibility with their existing setup is the top priority.
Overall cost and ongoing use Compare the number of nodes in the system and factor in power requirements and any optional services. Check whether a trial service automatically becomes a paid subscription when the trial ends. If I mainly want to weigh up the purchase and ongoing costs, I also consider potential extra nodes and recurring services. Around 14% of consumers name overall cost as their main buying priority.

Common buying mistakes

  • Mistaking advertised Wi-Fi speed or coverage for file transfer performance at the far end

    Product specifications describe stated capacity and coverage. The Consumentenbond assesses Wi-Fi performance in different locations and using different types of files.

    Compare the ports and backhaul on the models you’re considering, and test the connection where you work with your project files.

  • Putting a mesh node in the weakest spot without checking its connection

    An extra node only helps if it can still communicate with the rest of the network. It can’t make up for a missing connection between nodes.

    First, check the connection at potential positions in between. If there’s no suitable spot for a wireless node, see whether Ethernet backhaul is possible.

  • Assuming every version of a model has the same contents and ports

    The Dutch product information for the TP-Link Deco X50-PoE specifically refers to version V2. The contents of available bundles may also vary.

    Compare the full model name, hardware version, number of nodes and ports for the version you want to buy.

    A different version may have different connection options or require a different setup. So check in advance whether your setup will need extra equipment or cabling.

  • Assuming an optional service or manufacturer’s warranty tells you everything about costs and your rights

    An optional service may become a paid subscription after a trial period. A manufacturer’s or retailer’s warranty is also separate from your statutory rights.

    Check the terms of any optional service and find out who the seller is. ACM ConsuWijzer distinguishes statutory guarantees from any manufacturer’s or retailer’s warranty.

    The NETGEAR Orbi 770 page states that Armor Plus is optional and becomes a paid service after the trial period unless you cancel. Signing up isn’t essential to using the mesh system.

Brands to compare

TP-Link

The Deco X50 is an expandable dual-band Wi-Fi 6 router. The Deco X50-PoE is designed for wall or ceiling mounting and wired setups.

  • TP-Link lists Ethernet backhaul and three Gigabit ports for the Deco X50.
  • The stated coverage isn’t a measurement taken at the end of a long corridor. For the Deco X50-PoE, check the hardware version before relying on the port specifications.

FRITZ!

The Mesh Set 1600 and Mesh Set 4200 are options to compare if you want to extend your mesh network or keep your existing router.

  • FRITZ! says the Mesh Set 1600 can connect to an existing router via LAN. The manufacturer describes the Set 4200 as three FRITZ!Repeater 3000 AX nodes.
  • These product specifications aren’t an independent performance test at a distant workspace. Check that the system and connection suit your router setup.

ASUS

AiMesh is an option if you want to combine compatible ASUS routers and nodes and set the backhaul for each node.

  • ASUS documents an Ethernet backhaul mode and connection priority, subject to the stated firmware requirement.
  • ASUS warns that nodes may lose their uplink if you enable wired-only mode without connecting the required cables. Check that your exact devices are supported.

NETGEAR

The Orbi 770 RBE772 is a two-node tri-band Wi-Fi 7 system worth comparing, with wired speeds of up to 2.5 Gbit/s according to the manufacturer.

  • NETGEAR lists 2.5 Gbit/s wired backhaul as an option.
  • That specification doesn’t guarantee performance in your corridor. Armor Plus is optional and may become a paid service after the trial period unless you cancel.

Mesh products at Joybuy

These Joybuy product selections are mesh systems with multiple nodes for extending Wi-Fi around your home. Check the contents, connections and suitability for your intended placement for each model.

TP-Link Deco M4 mesh system with 3 nodes

TP-Link Deco M4 (3-pack)

This three-unit system is an option if you want to position multiple nodes around your home.

Dual-band Wi-Fi 5 (802.11ac); stated maximum speed of 1200 Mbps. According to the product description, the Deco app helps with setup and placement. The stated speed isn’t a measurement of file transfer performance at your workspace.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh system with 3 nodes

TP-Link Deco X50 (3-pack)

This system is worth considering if you want to position multiple mesh nodes and may be able to run a cable between them.

Wi-Fi 6 (802.11ax). TP-Link lists optional Ethernet backhaul and three Gigabit ports for the Deco X50.

View at Joybuy
TP-Link Deco X50-PoE Wi-Fi 6 mesh system with 2 nodes

TP-Link Deco X50-PoE (2-pack)

This system could suit you if you want to use two mesh nodes and power them over Ethernet in your setup.

Wi-Fi 6 (802.11ax), PoE support and two Ethernet ports per unit according to the product description. Check the exact hardware version and port configuration of the version you’re buying.

View at Joybuy
TP-Link Deco S7 mesh system with 3 nodes

TP-Link Deco S7 (3-pack)

A three-node system is an option if you want to provide mesh connectivity in several areas of your home.

Dual-band Wi-Fi 5 (802.11ac) and three Ethernet ports per unit according to the product description.

View at Joybuy
TP-Link Deco XE75 Pro tri-band Wi-Fi 6E mesh system with 3 nodes

TP-Link Deco XE75 Pro (3-pack)

This three-node system is worth comparing if you’re considering a tri-band setup.

Tri-band Wi-Fi 6E (802.11ax), with 2.4 GHz, 5 GHz and 6 GHz bands according to the product title. These specifications alone don’t predict file transfer performance at your workspace.

View at Joybuy

Frequently asked questions

Will an extra mesh node help right at the end of the corridor?

Only if the node itself gets a usable connection to the rest of the network. Check the connection between nodes, then test at your workspace. If you can run a cable, compare Ethernet backhaul.

Can I keep my existing modem or router?

It depends on the system and setup. FRITZ! says the Mesh Set 1600 can connect to an existing router via LAN. For other models, check the manual and available operating modes.

Do I need a licence or registration to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you can use Wi-Fi at home without a licence if you use the designated frequencies and comply with the conditions of use. No notification or registration is required for this licence-exempt use.

What should I look for in a Wi-Fi device sold in the Netherlands?

The Dutch Authority for Digital Infrastructure says that equipment must carry the CE mark and that only CE-marked products may be sold in Europe. Check the marking and version of the specific product on offer; a product listing alone doesn’t show that this check has been carried out.

Does the statutory guarantee on a mesh system always end after two years?

No. ACM ConsuWijzer distinguishes between statutory guarantees and any manufacturer’s or retailer’s warranty. If a product is faulty despite normal use, the seller is responsible for providing an appropriate remedy free of charge. In the Netherlands, the statutory guarantee doesn’t simply have a fixed two-year term.