Who is this buying guide for?

Learner at the end of the corridor

Your lesson keeps cutting out at the far end, and you want to know where an extra Wi-Fi node can still get a good connection to the previous one. The Consumers’ Association (Consumentenbond) recommends placing a Wi-Fi booster where the signal is still usable.

Household with an Ethernet cable

You can connect a node by cable further along the corridor and want to avoid relying on Wi-Fi all the way down the corridor for the connection between mesh nodes. TP-Link and eero describe Ethernet backhaul for compatible devices.

User with an existing broadband provider router

You want to keep your current router and are looking for a straightforward way to connect and manage additional Wi-Fi nodes. TP-Link describes access point mode for Deco systems when the existing router continues to manage the network functions.

What should you look for?

Wireless mesh

Suitable if: you can’t run an Ethernet cable and can find a spot along the way where the node still gets a good connection to the previous one.

Bear in mind: the radio signal between nodes will still depend on the distance and obstacles in your home.

Mesh with Ethernet backhaul

Suitable if: there’s a usable Ethernet cable at or near the end of the corridor, and the nodes you choose have suitable Ethernet ports.

Bear in mind: this setup requires cabling; check the port speed of the specific model too.

What to consider What should you check? Who is this important for?
Coverage where you take the lesson Check how many nodes are included in the set, and test where the next node can still maintain a good connection to the previous one. If my lesson only cuts out at the end of the corridor, I want every node along the way to stay connected to the previous one. Around 36% of consumers put reliable coverage where they take the lesson first.
Connection between nodes Check whether there’s an Ethernet cable and whether each node you plan to use has a suitable Ethernet port. For example, an eero 6 Extender doesn’t have an Ethernet port. I want to know whether the nodes need to connect to each other wirelessly or whether I can use a cable. Around 29% of consumers prioritise the connection between nodes.
Connection to your router Check whether your chosen model offers access point mode if you want to keep using your existing router; follow the instructions for that model. If I need to keep using my broadband provider’s router, I want to understand in advance how the mesh system connects to it. Around 21% of consumers focus mainly on connectivity and management.
Number of nodes and features Compare the number of nodes, the ports and any cabling you may need. You won’t necessarily need more nodes or a newer Wi-Fi standard just for one lesson spot. I want to improve the connection where I take the lesson without buying unnecessary extra equipment. Around 14% of consumers focus mainly on the cost and use of features they don’t need.

Things to consider when buying

  • Placing a wireless node where the Wi-Fi signal has already dropped out

    The new node still needs a good connection to the previous one. If you place it somewhere with barely any signal, it won’t fix that connection by itself.

    Look for a midway spot with as few obstacles as possible, then test the connection at the end of the corridor. Consider wired backhaul if there’s an Ethernet cable available there.

    If the first placement doesn’t work, you may need an extra node or to install cabling after all.

  • Assuming the Wi-Fi speed on the box is the speed you’ll get for your lesson

    A maximum radio speed isn’t a measure of the throughput at the end of your corridor. The actual connection will also depend on your home and the devices you use.

    Test the connection where you take the lesson, and check the Ethernet ports too if you’re using a wired connection.

  • Assuming every mesh node has an Ethernet port

    Ports can vary between models. An eero 6 Extender doesn’t have an Ethernet port, whereas the eero 6+ router model has two.

    Before buying, check the full model name and the number of ports on each included node.

Featured brands

TP-Link

The Deco range includes Wi-Fi 6 and Wi-Fi 5 models, among others. Features vary by model.

  • According to TP-Link, the Deco X50 has three gigabit ports per node and supports optional Ethernet backhaul.
  • TP-Link quotes maximum coverage of 604 m² for three X50 nodes. This is a manufacturer’s claim, not a guarantee of coverage in a long corridor with obstacles.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system with Ethernet backhaul options and network name settings.

  • ASUS says Ethernet backhaul is possible with the XD5 when there’s cabling in the walls.
  • To benefit from Wi-Fi 6 speeds, you’ll need a compatible device; coverage figures aren’t measurements taken in your home.

eero

The eero 6+ range includes a router model and a separate extender; the ports vary by model.

  • eero supports wired backhaul between compatible devices.
  • According to eero, the eero 6 Extender doesn’t have an Ethernet port, whereas the eero 6+ router model has two. So don’t assume that features of the router also apply to the extender.

Mesh systems on Joybuy

This selection includes mesh systems with two or three nodes, including models that support wired backhaul.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-pack

A two-node mesh system for those considering a setup with two nodes.

The product information lists tri-band Wi-Fi 7, MLO, and wired and wireless backhaul.

Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-pack

A two-node mesh system for those looking for two nodes and tri-band Wi-Fi.

The product name lists Wi-Fi 7 and the 2.4, 5 and 6 GHz bands.

Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-pack

A two-node mesh system to consider if you’re looking for a setup with wired backhaul.

The product information lists Wi-Fi 6, Ethernet backhaul and setup via the Deco app.

Joybuy
TP-Link Deco M4 mesh system, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 3-pack

A three-node set for those considering several midway points.

The product information lists dual-band Wi-Fi 5 on 2.4 and 5 GHz, with management via the Deco app.

Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

A three-node set for those looking to place several mesh nodes.

According to TP-Link, the X50 has three gigabit ports per node and supports optional Ethernet backhaul.

Joybuy

Frequently asked questions

Should I put the extra Wi-Fi node right at the end of the corridor?

Not if it can barely reach the previous node there. Place a wireless node further back along the route, with as few obstacles as possible, then test the connection where you take the lesson.

Can I keep my existing router?

Yes, with a compatible mesh model that has access point mode. TP-Link describes this mode for Deco when the existing router needs to continue managing network functions; follow the instructions for the model you choose.

Will the stated Wi-Fi speed and coverage work in my corridor?

There’s no guarantee. TP-Link points out that actual throughput and coverage can vary depending on factors such as building materials, obstacles and the limitations of connected devices. So test the connection where you take the lesson.

What should I look for in the CE mark and home Wi-Fi?

Check that the exact mesh model carries the correct CE mark. According to the Dutch Radiocommunications Agency (Rijksinspectie Digitale Infrastructuur), home Wi-Fi is licence-exempt when you use the designated frequencies and follow the conditions of use.

What happens if a mesh node develops a fault later on?

In the Netherlands, you have a legal guarantee, but there’s no single fixed statutory guarantee period. The seller is your point of contact if a product is faulty; a manufacturer’s guarantee doesn’t replace your statutory rights. What you can expect depends, among other things, on the product and the fault.