Who is mesh Wi-Fi in a long corridor for?

For viewers with weak Wi-Fi coverage

If the stream buffers mainly at the far end of the corridor, the position of an extra Wi-Fi point and its connection to the first point are important considerations. The Consumentenbond advises placing a Wi-Fi booster closer to the centre of your home if the signal is weak at the far end.

For viewers who can run an ethernet cable

If you can run a cable to a point further away, you can also compare mesh systems with ethernet backhaul. This connects the points via cable rather than relying solely on a wireless connection.

For viewers with an existing router from their internet provider

If you want to keep your current router, check how the mesh system connects to it and which mesh features work with that combination.

What should you look for in mesh Wi-Fi for a livestream?

First, check whether the internet connection is already buffering at the router. If the connection is good there but not at the far end of the corridor, assess the position of the mesh points and the connection between them.

The table assumes you’re streaming a concert at the end of a long corridor. Which check to prioritise depends on the space available, your cabling and the equipment you want to keep.

Concern What to look for when buying Who is this important for?
Coverage at the far end of the corridor Test at your viewing spot and find an intermediate position where the points can still connect to each other. If coverage is weak at the far end of your home, the Consumentenbond advises placing a point closer to the centre. If I’m watching a concert at the far end of the corridor, I want to know whether an intermediate point will still get a good connection there. Around 36% of consumers in this situation prioritise coverage and placement.
Connection between mesh points Check whether ethernet backhaul is supported by the specific model and whether you can run a cable. Without a cable, the position of the wireless points is key. If you can run a cable to a point further away, you’ll want to know whether the system supports that connection. Without a cable, a reliable wireless link is important. Around 29% of consumers prioritise the connection between the points.
Connection to existing equipment Decide which router you’re keeping and check that it works with the mesh setup, and that the point at your viewing spot has the LAN connections you need. If I want to keep my current router or a wired viewing device, I need a suitable connection and a compatible setup. Around 21% of consumers prioritise this.
Overall cost and upkeep Compare the number of points you need and the energy consumption of the models that suit your setup. If you want to weigh up features and running costs, consider how many points you need and how much energy they use. Around 14% of consumers prioritise overall cost and upkeep.

Common buying mistakes

  • Assuming a high stated coverage range guarantees coverage throughout the corridor

    A manufacturer’s stated range isn’t a measurement of performance in your home. Placement and obstacles can affect the connection between points.

    Before you buy, check where the points could go and test the stream at your actual viewing spot.

  • Choosing a dual-band system without checking the connection between the points

    Ethernet backhaul is only useful if the model supports it and you can run a cable. With a wireless setup, the position of the points still matters.

    Compare the wired option with the positions you can use for a wireless setup. Assess a tri-band system based on its full specification.

  • Confusing an extender with a router or a point with an ethernet port

    According to the manufacturer, the eero 6+ router has two 1 GbE ports. The separate extender has no ethernet ports and can’t be connected directly to a modem.

    Check what each part of the package is—a router or an extender—and which ports it has.

Brands to compare

TP-Link

The Deco X50 is a dual-band Wi-Fi 6 mesh system for anyone looking to place multiple Wi-Fi points around their home.

  • TP-Link lists three gigabit ports on each Deco X50 and optional ethernet backhaul.
  • Stated coverage areas and radio speeds don’t show how stable a stream will be at the end of your corridor.

ASUS

The ZenWiFi XD5 is a dual-band mesh option that can use ethernet backhaul if you have network cables available.

  • ASUS lists support for ethernet backhaul, and older Wi-Fi devices can connect.
  • You’ll need a compatible device to use specific Wi-Fi 6 features. Also check how the system connects to your existing router.

FRITZ!

The FRITZ!Repeater 3000 AX is particularly relevant if you’re extending a compatible existing FRITZ! mesh setup.

  • FRITZ! lists three frequency bands and two gigabit LAN ports.
  • FRITZ! says it can be used with other routers, but check separately which mesh features are available in that setup.

Netgear

The Orbi RBK763S is a tri-band system with a router and two satellites, using a wireless connection between the points.

  • Netgear lists a dedicated connection between the router and satellites, along with gigabit ports.
  • Claims about coverage and uninterrupted streaming aren’t based on independent testing in your home.

eero

The eero 6+ is worth considering if you want to expand an existing eero network.

  • According to eero, the router has two 1 GbE ports.
  • According to the manufacturer, the separate extender has no ethernet ports and requires an existing eero network.

Mesh Wi-Fi products at Joybuy

These Joybuy products are mesh systems with two or three points for Wi-Fi around your home. Check that the backhaul, ports and compatibility of the specific model suit your setup.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-pack

A 2-pack for setting up two mesh points and comparing wired and wireless connections between them.

The product description mentions Wi-Fi 7, tri-band, MLO, and wired and wireless backhaul.

View at Joybuy
TP-Link Deco E4 mesh system, 3-pack

TP-Link Deco E4 3-pack

A 3-pack for anyone looking to place multiple Wi-Fi points. Check in advance that the connections suit your wired equipment.

Dual-band, Wi-Fi 5 (802.11ac); the ethernet ports described support speeds of up to 100 Mbps.

View at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack

ASUS ZenWiFi BT8 2-pack

A 2-pack to consider for a two-point mesh setup if you’re looking for a tri-band system.

The product name lists Wi-Fi 7 and tri-band on 2.4, 5 and 6 GHz; the product description mentions AiMesh compatibility.

View at Joybuy
TP-Link Deco X20 mesh system, 2-pack

TP-Link Deco X20 2-pack

A 2-pack for anyone looking to place two mesh points and have the option of wired backhaul.

The product description mentions Wi-Fi 6 and optional ethernet backhaul.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 3-pack

A 3-pack for anyone looking to place multiple mesh points. Check in advance that you have suitable locations and power sockets.

Wi-Fi 6; TP-Link lists three gigabit ports per unit and optional ethernet backhaul.

View at Joybuy

Frequently asked questions

Should you test your internet connection before buying mesh Wi-Fi?

Yes, if you don’t yet know where the buffering is coming from. Compare a wired test near the connection point with the connection at your viewing spot. ACM ConsuWijzer recommends using a network cable at the connection point to limit the effect of Wi-Fi on the test.

Where should you put an extra Wi-Fi point in a long corridor?

Don’t automatically put it where the signal is weakest. If the signal is weak at the far end of your home, the Consumentenbond recommends placing a point closer to the centre. Then test the stream where you plan to watch.

What download speed does a concert stream need?

It depends on the streaming service and picture quality. Netflix recommends a stable connection of at least 5 Mbps for 1080p and 15 Mbps for 4K for its own films, series and live events. These figures aren’t general requirements for every concert platform and don’t guarantee uninterrupted Wi-Fi.

What should you look for in the CE marking?

Check that the version on offer has the correct CE marking; the model name alone isn’t proof. The Rijksinspectie Digitale Infrastructuur states that equipment sold in Europe must meet the applicable product requirements and display the CE marking on the equipment.

Which running costs and maintenance factors should you compare?

Compare how many points you need and the energy consumption of the model you choose. The Consumentenbond assesses energy consumption and ease of use separately. Your choice depends on the setup and features you’ll actually use.