Who is this advice for?

Downloading at the end of the corridor

You mainly want a usable connection at a workstation further away. Test the connection there and at the router, then check where a node can still get a strong enough signal.

Running a cable

You can run an Ethernet cable to a point further along and want to keep the connection between Wi-Fi nodes reliable, even if the corridor weakens the wireless signal.

Keeping your existing modem

You want to keep using your current connection and first check whether repositioning the router will be enough before buying extra equipment.

What should you look for when choosing?

First, find out where the slowdown occurs. Then consider whether you can reposition the router or run a cable, and only then decide how many Wi-Fi nodes you need.

What to consider What should you check? Who is this important for?
Coverage at the end of the corridor Compare a wired speed test at the router with the connection where you download. Also check whether you can place a node somewhere with a usable signal. If I download course materials at the far end of the corridor, I want a usable connection there. Around 36% of consumers say coverage is their top priority when buying.
Connection between Wi-Fi nodes Check whether you can run a cable and whether the exact system supports Ethernet backhaul. If not, test the wireless connection at the intended node location. I want to avoid the connection between nodes slowing down my downloads. Around 29% of consumers prioritise a reliable connection between nodes.
Cost and compatibility Try repositioning the router first. Then check how many units are included and whether the set is compatible with your existing modem or router. I want to keep my existing connection and buy only what the test shows I need. Around 21% of consumers prioritise low additional costs and compatibility with their existing network.
Download speed when several devices are in use Test your wired internet speed and check whether your laptop and network ports can handle the speed you’re aiming for. For large or frequent downloads, I want to know whether my internet connection and laptop can handle the required throughput. Around 14% of consumers prioritise download speed.

Common buying mistakes

  • Confusing a Wi-Fi problem with a slow internet connection

    Mesh won’t automatically improve the speed supplied by your internet connection at the router.

    First, test the connection at the router using an Ethernet cable, then compare the result with a test at the distant workstation.

  • Placing an extra node at the very edge of the dead zone

    A wireless node needs a usable connection to the previous node. Walls, the layout of the corridor and other obstacles can all affect coverage.

    Test a midway location where the signal is still usable, or find out whether you can run an Ethernet cable further along.

    If a wireless midway location isn’t enough, you may still need to run a cable or add another node.

  • Assuming different pack sizes or similarly named models are identical

    A 2-pack, 3-pack and another model variant may offer different configurations and connections.

    Check the full model name, the number of units and the ports on the version you plan to buy.

    If your chosen set doesn’t include enough nodes for your planned setup, you may need an extra unit.

Brands to compare

TP-Link

The Deco X50 range is worth considering if you’re looking for an expandable dual-band Wi-Fi 6 system and may want to use Ethernet backhaul.

  • TP-Link lists three gigabit ports per Deco X50 unit and optional Ethernet backhaul.
  • The stated coverage is a manufacturer claim, not a prediction of performance in a corridor with obstacles. Also check the pack size and hardware version.

FRITZ!

The FRITZ!Mesh Set 1700 may suit you if you want to keep using an existing router or fibre modem and extend your network with FRITZ! nodes.

  • FRITZ! describes how to connect the system to an existing router or fibre modem, and offers sets with different numbers of nodes.
  • Check the exact set and whether a wireless or wired connection is possible at the intended location. Stated coverage won’t predict the results in your corridor.

ASUS

ZenWiFi BD4 is worth considering if you want to compare AiMesh expansion or fast wired connections as well as coverage.

  • ASUS lists two 2.5-gigabit ports per BD4 unit and a 3-pack variant.
  • The BD4 is dual-band. A higher advertised Wi-Fi speed doesn’t necessarily mean faster downloads in a distant location, especially if your internet connection is slower.

NETGEAR

Orbi 770 is a tri-band Wi-Fi 7 alternative for anyone with other network capacity requirements as well as coverage needs.

  • NETGEAR lists an improved tri-band backhaul and 2.5-gigabit connections for the RBE772-2-pack.
  • The performance and coverage figures are manufacturer claims for that version and don’t predict how the system will perform in your corridor. Compare the extra features with your own needs.

Joybuy products

These models are mesh sets with two or three units. Check the connections for each version and make sure the number of nodes suits the locations available in your corridor.

TP-Link Deco X20 AX1800 mesh Wi-Fi system, 2-pack

TP-Link Deco X20 AX1800 (2-pack)

A good fit if you want to use two mesh units and can run a wired connection between them.

Wi-Fi 6; up to 1800 Mbps according to the product description; two units; Ethernet backhaul.

View at Joybuy
TP-Link Deco X50 dual-band Wi-Fi 6, 3-pack

TP-Link Deco X50 (3-pack)

A good fit if you want to position three mesh units and want to consider Ethernet backhaul when choosing.

Dual-band Wi-Fi 6; three units; three gigabit ports per unit; optional Ethernet backhaul.

Actual coverage depends on the environment and placement; stated coverage won’t predict the range in your corridor.

View at Joybuy
TP-Link Deco X50-PoE dual-band Wi-Fi 6, 2-pack

TP-Link Deco X50-PoE (2-pack)

A good fit if you want to position two mesh units and PoE support is relevant to your chosen setup.

Dual-band Wi-Fi 6; two units; PoE support; two Ethernet ports per unit.

Actual coverage depends on the environment and placement; the product listing won’t predict the range in your corridor.

View at Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E mesh set

TP-Link Deco XE75 (3-pack)

A good fit if you want to compare three mesh units and additional wireless networking options with your own equipment and internet connection.

Tri-band Wi-Fi 6E; 2.4, 5 and 6 GHz bands; three units.

Actual coverage depends on the environment and placement; a stated coverage area won’t predict the range in your corridor.

View at Joybuy
TP-Link Deco X50 dual-band Wi-Fi 6, 2-pack

TP-Link Deco X50 (2-pack)

A good fit if you’re looking for two mesh units and want to check whether a wired connection between them is possible.

Dual-band Wi-Fi 6; two units; three gigabit ports per unit; optional Ethernet backhaul.

Actual coverage depends on the environment and placement; the manufacturer’s stated coverage won’t predict the range in your corridor.

View at Joybuy

Frequently asked questions

How can you tell whether mesh will help with downloads at the end of the corridor?

Compare a wired speed test at the router with one at your workstation. If the internet connection is slow at the router too, investigate that first. If the main issue is weaker coverage further away, try repositioning the router and, if needed, adding a Wi-Fi node. The Consumers’ Association (Consumentenbond) recommends using a wired connection for a speed test.

Where should you place a wireless node?

Place it somewhere it can still get a usable connection to the previous node, rather than right at the end of an area with no coverage. Walls, metal and interference can all affect the connection, so test the intended location before finalising your setup.

Can mesh work with your existing broadband provider’s modem?

It depends on the system and the connection. TP-Link describes router and access point modes for Deco. FRITZ! says the Mesh Set 1700 can connect to an existing router or fibre modem. Check the instructions for the exact model and your existing equipment.

What if the set doesn’t work well at home, and what about returns?

Test the connection and placement promptly. According to ACM ConsuWijzer, online consumer purchases generally come with a statutory 14-day cooling-off period after delivery. Check the applicable exceptions and the seller’s information.

Can you connect your own router in the Netherlands, and what should you know about CE marking?

ACM ConsuWijzer confirms that you can choose your own router, subject to the applicable requirements and connection conditions. The Dutch Digital Infrastructure Inspectorate (Rijksinspectie Digitale Infrastructuur) explains that radio equipment placed on the EU market must meet the applicable requirements and carry the correct CE marking. Check the information for the exact product variant. This does not mean you have permission to connect equipment to a managed school or building network.