Home worker in the loft without a network cable
You mainly want to be able to use your loft workspace for video calls, and need to find a suitable spot for a wireless node.
If you can run a network cable to the loft, compare wired mesh with an access point: the connection between the nodes will then run through the cable rather than wirelessly between floors. If you can’t run a cable, wireless mesh may be an option, but the position of the intermediate node and its connection to the next node remain key. Then consider how many nodes and Ethernet ports you need, and how the solution will work with your existing router.
You mainly want to be able to use your loft workspace for video calls, and need to find a suitable spot for a wireless node.
You can run cabling between floors and want to compare wired mesh with an additional access point.
You want to connect both the desk on the floor below and the loft workspace, so you’re considering placement, connections and what your current router can do.
Choose this if: you can’t run a cable to the loft and have a spot in between with a usable Wi-Fi signal.
Bear in mind: the connection between the nodes will still depend on their placement and any obstacles.
Choose this if: you can connect the mesh nodes to each other by cable and want one managed mesh network.
Bear in mind: the system must support Ethernet backhaul, and you’ll need a suitable cable route.
Choose this if: there’s already a network cable to the loft and you mainly need an extra Wi-Fi access point there.
Bear in mind: an access point won’t automatically be managed as part of your router’s mesh network; check the features of your router and chosen extension.
First compare the connection between floors, then work out how many nodes and connections you need for both desks.
| What to consider | What should you check? | Who should consider this? |
|---|---|---|
| Stable connection in the loft | Consider where you could place an intermediate node and whether the system provides information about the connection between nodes. | If you don’t have a cable in the loft, you’ll want the intermediate node to receive a usable signal there. Around 40% of consumers prioritise a stable connection in the loft. |
| Cabling between floors | Check that the cable reaches the point you want and that the system supports Ethernet backhaul or the access point mode you need. | If there’s a cable to the loft, you can compare wired mesh with an access point. Around 30% of consumers prioritise a wired connection. |
| Both desks and devices | Count the Ethernet connections you need in each spot and decide how many Wi-Fi nodes you want to use. | If you want to work at both desks and connect devices by cable, the locations and available ports matter. Around 20% of consumers prioritise this need. |
| Installation, management and running costs | Check the operating mode, any paid extra features and how many nodes will stay switched on all the time. | If easy management and running costs matter more to you than extra features, it helps to work out in advance how many nodes you need. Around 10% of consumers start with this consideration. |
Coverage depends partly on your home and where you place the nodes; the Consumentenbond notes that not every mesh system it tested offers good coverage.
Also assess the connection between the nodes and check reception in both workspaces.
If a wireless intermediate node can’t get a usable connection, you may still need to run a cable or add another Wi-Fi node.
A wireless node needs a usable connection of its own, so its position also affects the connection to the loft.
First look for an intermediate spot with a strong enough signal. If that isn’t possible, consider running a cable or using an access point.
Extra nodes stay switched on and can use electricity. Additional features may also come with separate terms.
Compare how many nodes you need and check which features are available without an additional subscription.
Keeping more nodes switched on all the time can mean higher electricity use; paid extra services may also involve recurring costs.
The Deco X50 range is worth considering if you’re comparing a standalone mesh system with Wi-Fi 6 and Ethernet ports on each node.
The ZenWiFi XD5 is an option to explore if you want to compare wired backhaul or a different network mode.
A FRITZ!Repeater is an extension option to consider if you already use a compatible FRITZ!Box.
The Orbi RBK763S is a tri-band system with two satellites to compare if you’re considering a more extensive new setup.
These Joybuy products are mesh systems for extending Wi-Fi to several workspaces. When buying, also check that the CE marking and conformity information apply to the version on offer.
No image available
A mesh system for extending the connection between workspaces; check which backhaul option suits your cabling.
No image available
The product name indicates a mesh system with two nodes; check that Ethernet backhaul support suits your connection.
No image available
A mesh option for several locations; compare the connection you need between nodes and check that the network mode works with your router.
No image available
This version is described as a mesh system with Power over Ethernet; check that the connections and power supply suit your setup.
No image available
A mesh system with two nodes that work together; check whether you want to connect them wirelessly or via an available network cable.
Don’t put the node somewhere the existing signal already drops out: it needs a usable connection of its own. Check reception at the intended spot, then test the connection at both desks.
Yes, if the system you choose supports the appropriate wired mode. ASUS describes Ethernet backhaul for the ZenWiFi XD5; FRITZ! describes connecting the FRITZ!Repeater 3000 AX to a FRITZ!Box via LAN.
Start by considering your existing coverage and where both desks are. The Consumentenbond lists two nodes as an option for two floors and three for three floors; check that the loft gets enough coverage in your own home before choosing a larger pack.
No. According to the Dutch Authority for Digital Infrastructure, Wi-Fi is an example of frequency use that is exempt from permits, notification and registration requirements. The equipment must still meet the applicable product requirements, including CE marking; check that this information applies to the version on offer.
For many online consumer purchases, there is usually a 14-day cooling-off period, according to the Dutch Government. It depends on the purchase; your statutory rights if a product doesn’t conform to the contract are separate from the cooling-off period.