Who might benefit from mesh Wi-Fi in the loft?

Designer working in the loft

You upload from a workspace under the roof and want to find out whether a weak Wi-Fi signal is the limiting factor.

Resident with an Ethernet cable upstairs

You can connect nodes between floors by cable and want a connection to the loft, with Wi-Fi in several rooms.

Resident keeping their provider’s router

You want to extend your coverage without unintentionally changing how your existing home network works.

What should you look for when choosing?

Mesh with wired backhaul

Choose this when: you can run an Ethernet cable between the mesh nodes you want to use, and you also need Wi-Fi in other rooms.

Bear in mind: the cable route and the system’s connection requirements; a cable won’t increase your internet plan’s upload limit.

Fully wireless mesh

Choose this when: running a cable to the loft isn’t practical and you can place an intermediate node somewhere it can still receive a usable signal.

Bear in mind: floors, walls and placement can affect the connection between nodes; more nodes don’t guarantee faster uploads.

One wired access point or measure first

Choose this when: you mainly need Wi-Fi in the loft and already have Ethernet there, or you want to find out where the connection is struggling first.

Bear in mind: a single access point doesn’t automatically offer the same central management and roaming features as a mesh system.

Concern What to look for Who is this most relevant to?
Coverage in the loft Map out the router, workspace and possible intermediate positions, then choose the number of nodes. If I upload design files from the loft, I want to know whether the workspace gets Wi-Fi and whether a wireless intermediate node can still connect. Around 36% of consumers say loft coverage is their main concern when buying.
Connection between floors Compare a cable with wireless backhaul, and check whether the exact system supports Ethernet backhaul. When uploading large files, I want to make sure the connection between the loft and the router isn’t the weak link. Around 29% of consumers prioritise this connection when choosing.
Working alongside your provider’s router Check the operating mode you want and which network features remain available in that mode. If you want to keep using your provider’s router, you’ll want to avoid the new system setting up your network differently than intended. Around 21% of consumers say compatibility with their existing router is their main concern when buying.
Equipment and aftercare Compare how many nodes you need, and check the energy use and warranty information for the specific system. If I only need coverage in the loft, I don’t want to buy a larger system than my situation calls for. Around 14% of consumers say equipment, running costs and aftercare are their main concerns when buying.

Buying pitfalls to avoid

  • Confusing maximum Wi-Fi speed with your upload speed

    An upload uses your Wi-Fi connection, router and internet connection. If your wired upload speed is already limited at the router, a different Wi-Fi system won’t solve the problem.

    Measure your upload speed over a cable at the router first, then in the loft, before choosing a higher Wi-Fi specification. KPN explains how to measure internet, Wi-Fi and upload speeds.

  • Putting a wireless node where the signal has almost disappeared

    A wireless mesh node needs to be able to connect to the network itself; walls and floors affect coverage.

    Try an intermediate position or look into wired backhaul before choosing a system based solely on the number of nodes. TP-Link describes Ethernet backhaul as a connection between Deco nodes using an Ethernet cable.

  • Choosing access point mode without checking the features

    According to TP-Link, certain router features, including parental controls and port forwarding, aren’t available in Deco’s access point mode.

    Decide which router should manage your home network and check that the features you use are available in the mode you choose.

  • Confusing the manufacturer’s warranty with your statutory rights

    In the Netherlands, statutory warranty under ACM ConsuWijzer is separate from any manufacturer’s warranty.

    Keep your proof of purchase and contact the seller if a product develops a fault sooner than you could reasonably expect.

Brands and models to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system worth comparing if you’re looking for two or three nodes and, potentially, Ethernet backhaul.

  • TP-Link lists three gigabit ports and Ethernet backhaul support for the Deco X50.
  • Some Deco router features aren’t available in access point mode. The stated coverage area isn’t a measurement of the signal in your loft.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 option worth comparing if you want to assess the ports and router or access point mode on the exact system.

  • ASUS specifies two 2.5G WAN/LAN ports, access point mode and wired backhaul support for the BD4.
  • The BD4 uses 2.4 and 5GHz bands, not a separate 6GHz band. The Wi-Fi and port specifications alone don’t prove that your internet upload speed will be higher.

FRITZ!

The FRITZ!Mesh Set 1700 is worth considering if you want to use mesh nodes with an existing FRITZ!Box or a router from another brand.

  • FRITZ! describes different configurations depending on the main router.
  • When used behind a router from another brand, one node in the set takes over the Mesh Master role for a separate home network. Check that this suits the setup you want.

Mesh Wi-Fi products at Joybuy

This selection includes mesh systems for several rooms or floors, with both wired and wireless connections between nodes. Check the CE marking and accompanying product information for the specific model; the model name alone doesn’t confirm this for every individual product.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68, 2-pack

The product description lists two mesh nodes and support for wired backhaul, making it worth comparing if you want a wired connection between floors.

Tri-band Wi-Fi 7; Ethernet ports listed per node: 10, 2.5 and 1 Gbps.

View at Joybuy
ASUS ZenWiFi BT8, 2-pack

ASUS ZenWiFi BT8, 2-pack

The product information describes a mesh system with two nodes for Wi-Fi in several parts of your home.

Tri-band Wi-Fi 7 with 2.4, 5 and 6GHz bands.

View at Joybuy
ASUS ZenWiFi BD4, dual-band, 2 units

ASUS ZenWiFi BD4, dual-band, 2 units

The product description mentions wired backhaul, an option worth comparing if you want to connect your mesh nodes via Ethernet.

ASUS specifies two 2.5G WAN/LAN ports and access point mode for the BD4. The port speed alone won’t increase the speed of your internet plan.

View at Joybuy
TP-Link AX1800 Whole Home Mesh Wi-Fi 6, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6, 2-pack

The product description lists two mesh nodes for Wi-Fi in different parts of your home.

Wi-Fi 6; the product description lists OFDMA and MU-MIMO.

View at Joybuy
TP-Link Deco M4, dual-band, 3-pack

TP-Link Deco M4, dual-band, 3-pack

The product description lists three mesh nodes that work together. Compare this number with the rooms and intermediate positions in your home.

Dual-band Wi-Fi 5.

View at Joybuy

Frequently asked questions

How can you tell whether mesh could improve uploads from the loft?

First, compare a wired upload speed test at the router with one at your loft workspace. If the connection at the router is already the limiting factor, better Wi-Fi won’t solve that internet speed limitation. If the connection is mainly weak in the loft, look at node placement and backhaul.

Does every mesh node need to be right next to the router?

No, but a wireless node does need to be somewhere it can still get a good connection to the network. If wired backhaul is supported, the nodes can connect via Ethernet; follow the connection requirements for the mode you’ve chosen.

Can you use a mesh system alongside your provider’s router?

It depends on the system and the network features you want. TP-Link describes a Deco access point mode that works behind an existing router, but some Deco router features aren’t available in this mode. FRITZ! describes the Mesh Set as using its own Mesh Master behind a router from another brand.

What should you check after buying, in terms of maintenance and costs?

Check the energy use, update information and warranty details for the specific system. In the Netherlands, according to ACM ConsuWijzer, if a product breaks sooner than you could reasonably expect under normal use, you have statutory rights against the seller. A manufacturer’s warranty doesn’t replace those rights.

Do you need a licence to use Wi-Fi at home in the Netherlands?

According to the Dutch Radiocommunications Agency, you don’t need a licence to use Wi-Fi at home if you use the designated frequencies and comply with the conditions of use. When buying, also check the CE marking and accompanying product information for the specific model.