First, measure your upload speed using an Ethernet cable near your connection point, then compare it with the Wi-Fi upload speed in your loft. ACM ConsuWijzer recommends a wired test close to the connection point to rule out Wi-Fi as far as possible. If the connection to the loft is the main issue and you can run a cable, consider mesh with Ethernet backhaul; TP-Link describes the wired connection between Deco units as more stable and faster than Wi-Fi backhaul. Mesh won’t increase the upload speed of your internet package itself.
Who is this choice relevant to?
Portfolio creator working in the loft
You send files from a permanent workspace in your converted loft and want to find out whether Wi-Fi or your internet connection is slowing down your uploads. ACM ConsuWijzer recommends checking with a wired connection close to the connection point.
Homeowner without a cable to the loft
You want better Wi-Fi upstairs but need to connect the mesh points wirelessly. Placement and obstacles matter, so the Consumers’ Association recommends positioning Wi-Fi points where they can communicate well with one another.
Home worker with multiple devices
You want Wi-Fi in the loft and connections for wired devices, while connecting the new system to your existing home network. TP-Link describes both connection options and Ethernet backhaul for its Deco systems.
What factors determine your choice?
First, compare your wired upload speed with your Wi-Fi upload speed in the loft. Only then decide between running a cable upstairs, wireless mesh or changing your internet connection.
| What matters |
What should you check? |
Who is this important to? |
| Actual upload speed |
Compare repeated upload speed tests using Ethernet at the connection point with tests in the loft. Also check the upload speeds stated in your internet contract. |
I want to send portfolios from my permanent loft workspace and first find out whether Wi-Fi or my internet connection is causing the delay. Around 36% of consumers put a reliable upload speed at the top of their list of concerns. |
| Coverage without a cable |
Decide where an intermediate point could go and test the connection from there; don’t base your choice solely on a claimed coverage area. |
If running a cable to the loft isn’t feasible, I want to find an intermediate spot where the mesh point still gets a good connection to the rest of the network. Around 29% of consumers are mainly concerned with wireless coverage in the loft. |
| Ports and placement |
Count the ports you need and check the exact model and package configuration, power supply, and connection to your existing modem or router. |
For my permanent workspace, I want to know whether I can connect my equipment by cable and whether the units will fit where I want to put them. Around 21% of consumers mainly prioritise ports and workspace layout. |
| Package and support |
Compare packages of the same size and check the installation requirements and terms of any warranty. |
I want to choose a configuration that suits the number of points I need and know who to contact if the product doesn’t work properly. Around 14% of consumers mainly consider package size, installation and support. |
Common mistakes when choosing
-
Assuming a high Wi-Fi speed means a high upload speed
Your internet connection speed and the wireless connection in your home are different parts of the route an upload takes. A new mesh system won’t fix a limitation with the internet connection itself.
First, test your connection by cable near the connection point and compare the result with the upload speeds stated in your contract.
-
Putting a wireless mesh point where there’s barely any coverage
An additional point still needs to connect to the rest of the network. Obstacles and placement can therefore affect the connection in your loft.
Find an intermediate spot where the mesh points can communicate well with one another, then test the upload speed in the loft.
-
Treating the Deco X50 and Deco X50-PoE as the same model
TP-Link describes different power supply and mounting options for the X50-PoE compared with the standard X50. The PoE model’s specifications don’t automatically apply to the X50.
Before choosing, check the full model name, package size, power supply and ports for the version you’re considering.
Brands worth comparing
TP-Link
The Deco X50 is worth considering if you’re looking for an expandable Wi-Fi 6 setup with Ethernet backhaul.
- TP-Link specifies three gigabit ports on each standard X50 unit and describes a wired connection between Deco points.
- The separate X50-PoE has different power supply and mounting options. This manufacturer information doesn’t predict the upload speed you’ll get in your loft.
ASUS
The ZenWiFi XD5 is a system to compare if Ethernet backhaul matters to you.
- ASUS describes Ethernet backhaul for the XD5.
- The ASUS specifications page consulted is for the US market and warns that the use of 160 MHz may be restricted by region. So don’t assume that every setting listed is available on a model sold in the Netherlands.
NETGEAR
Orbi is worth considering if you want to compare the connection between the router and satellites, including the option of an Ethernet connection.
- NETGEAR describes both wireless and wired backhaul.
- NETGEAR recommends updating the firmware before setting up Ethernet backhaul. Check the ports and features of the exact Orbi model.
Linksys
Velop Pro 6E is an option to compare if compatible 6 GHz devices matter to you, as well as the connection between mesh points.
- Linksys lists both wired and wireless backhaul for this range. According to Linksys, using the 6GHz band requires a Wi-Fi 6E device.
- Manufacturer information about coverage or speed can’t predict the upload speed you’ll get in a particular loft.
Mesh Wi-Fi products at Joybuy
Below are mesh Wi-Fi products for a home network. Check each model’s configuration and connections to make sure they suit your loft workspace.
No image available
TP-Link Deco X50 (3-pack)
Suitable if you want to use mesh points across multiple floors. TP-Link specifies three gigabit ports on each Deco X50 unit and describes Ethernet backhaul for Deco systems.
View at Joybuy
No image available
Huawei eKit OptiX FG736 BE3600 Dual-Band Wi-Fi 7 Mesh Router
A mesh router for setting up a home network with multiple units. The product name specifies dual-band and Wi-Fi 7.
View at Joybuy
No image available
Linksys Velop Pro 7 Tri-Band Wi-Fi 7
Suitable if you want to extend Wi-Fi coverage across multiple mesh points. The product name specifies Tri-Band and Wi-Fi 7.
View at Joybuy
No image available
TP-Link Deco S7 (3-pack) Dual-Band Wi-Fi 5
Suitable if you want to extend Wi-Fi coverage across multiple mesh points and connect wired devices. The product name specifies dual-band and Wi-Fi 5.
View at Joybuy
No image available
TP-Link Deco XE75 Tri-Band Wi-Fi 6E
Suitable if you want to extend Wi-Fi coverage across multiple areas and need wired connections. The product name specifies Tri-Band and Wi-Fi 6E.
View at Joybuy
Frequently asked questions
How can you tell whether mesh could help with your portfolio uploads?
Test your upload speed several times using an Ethernet cable close to the connection point, then compare it with the connection in your loft. If the wired test is still slower than the speed stated in your contract, look into your provider’s connection first. If it’s mainly the Wi-Fi in your loft that’s weak, consider placement and backhaul.
Where should I connect a Deco satellite using a cable?
According to TP-Link, in router mode you should connect the cable from the satellite to the LAN port on the main Deco or to a switch connected to it. In access point mode, TP-Link also describes connecting via the main modem or router. After installation, check in the app that Ethernet backhaul is active.
What if the mesh system you bought online isn’t right for you?
According to ACM ConsuWijzer, when you buy something online as a consumer, you usually have a statutory 14-day cooling-off period from the date of delivery, subject to exceptions and conditions. If a product is faulty, you may also have statutory warranty rights against the seller.
Do you need a licence or registration to use Wi-Fi at home in the Netherlands?
The Dutch Authority for Digital Infrastructure states that Wi-Fi can be used in the Netherlands without a licence and that no notification or registration is required, provided the conditions of use are met. Radio equipment placed on the European market is also subject to product regulations, so don’t assess a particular model solely on the basis of its general name.