First, measure the upload speed at your modem using a network cable, then compare it with the speed in your loft. Mesh can improve weak Wi-Fi coverage, but it won’t increase the upload speed of your internet connection. The Dutch Consumers’ Association recommends testing the speed over a wired connection. If Wi-Fi is still usable at an intermediate point, wireless mesh could be a good option. If you can run a cable upstairs, compare mesh with Ethernet backhaul against a wired access point or device, and check the ports and connections on your modem.
Who is this choice relevant to?
Photo uploader with weak Wi-Fi in the loft
If the connection seems fine at the modem, but photo albums take a long time to upload from your converted loft, first check your Wi-Fi coverage and where you could place an additional access point. The Dutch Consumers’ Association recommends positioning mesh points so they maintain a usable connection with each other.
Homeowner with a cable to the loft
If you can use or install a network cable, compare a wired connection with mesh using Ethernet backhaul. NETGEAR explains how a cable, sometimes via a switch, can connect mesh points to the router.
Uploader unsure about their internet speed
If you want to find out whether your internet upload speed is the limiting factor, start by testing the connection over a cable at the modem. The Dutch Consumers’ Association recommends connecting a computer to the modem with a network cable for a speed test.
What should you look for when buying?
Wireless mesh
A good fit if: the upload speed at the modem is sufficient, but Wi-Fi is weak in the loft and there is still a usable connection at an intermediate point.
Bear in mind: walls, floors and the position of both points. The Dutch Consumers’ Association recommends choosing a spot with as few obstacles as possible.
Mesh with Ethernet backhaul
A good fit if: you can run a network cable upstairs and want Wi-Fi in several locations.
Bear in mind: the work involved and any networking equipment needed for the cable route. Check that your chosen system supports Ethernet backhaul and which ports will remain free afterwards.
Wired access point or device
A good fit if: you mainly upload from one fixed location and already have, or can install, a network cable there.
Bear in mind: the cable route and, for an access point, how it connects to your existing network. You may need a different set-up for broader Wi-Fi coverage.
Sort out your existing connection first
A good fit if: a wired test at the modem already gives disappointing results, or adjusting your existing Wi-Fi set-up could solve the problem.
Bear in mind: moving or adjusting equipment won’t guarantee better upload speeds unless you test the connection.
| What to consider |
What should you check? |
Who is this important for? |
| Wi-Fi in the loft |
Test where you upload and at an intermediate point. The Dutch Consumers’ Association recommends positioning mesh points so they can reach each other reliably. |
If I upload photos upstairs, I want to know whether a point in between will still maintain a connection. Around 33% of consumers prioritise usable Wi-Fi in the loft. |
| Connection between floors |
Check whether you can run a cable, whether the system supports Ethernet backhaul and how many ports will remain free once it is connected. NETGEAR explains Ethernet backhaul via a network cable. |
If the connection between floors is my main concern, I want to know whether cabling is practical or a wireless set-up will be enough. Around 27% of consumers prioritise this connection. |
| Internet upload speed |
Compare the upload speed from a wired test at the modem with a test in the loft. The Dutch Consumers’ Association recommends connecting a computer with a network cable for the speed test. |
If I’m not sure whether my internet connection or Wi-Fi is slowing down uploads, I’ll test at the modem first. Around 27% of consumers want to rule out their internet upload speed first. |
| Connection to your network |
Check the router or access point mode, and count the ports needed for mesh points and wired devices. ASUS lists both modes for the ZenWiFi AX (XT8). |
If I want to keep using my existing equipment, I need to know how the new system will connect to it and which ports are required. Around 13% of consumers prioritise compatibility with their existing network. |
Common buying mistakes
-
Assuming faster Wi-Fi means faster cloud uploads
A Wi-Fi specification doesn’t measure your internet connection or the reception in your loft. A mesh system won’t fix a limitation with your internet upload speed itself.
Before comparing products, test the connection over a cable at the modem and then where you upload.
You may still need a cable or an additional point with a different set-up.
-
Comparing only the number of points
Ports used to connect mesh points aren’t available for other devices at the same time.
Plan the connections you need and check how many points and free ports you’ll require before buying.
A wired set-up may also require a network cable or switch.
Brands to compare
TP-Link
The Deco X50 is described as a dual-band Wi-Fi 6 mesh system, available with one, two or three points. TP-Link says the points can be connected wirelessly or using optional Ethernet backhaul.
- According to TP-Link, the Deco X50 has three gigabit ports per point and supports Ethernet backhaul.
- The stated Wi-Fi speed and coverage don’t guarantee a particular upload speed in your loft. Check which system size is right for your home.
ASUS
The ZenWiFi AX (XT8) is a tri-band Wi-Fi 6 system worth comparing if connections and your preferred network mode are important.
- According to ASUS, the XT8 supports router and access point modes and has a 2.5G WAN port and three gigabit LAN ports.
- ASUS notes that the availability of 160 MHz on 5 GHz can vary by country. Radio specifications don’t guarantee upload performance through a loft floor.
NETGEAR
NETGEAR describes the Orbi 370 series as offering both wireless and wired connections between the router and satellite.
- NETGEAR lists a 2.5 Gig Ethernet port on both the router and satellite for a wired backhaul connection.
- That port specification isn’t an independent comparison or a guarantee that wireless backhaul will work well in your loft.
Joybuy products
These Joybuy products are mesh systems designed to provide Wi-Fi coverage in several locations; some descriptions mention wired backhaul or Powerline. Before buying, check that the specific model has the required CE marking. According to the Dutch Authority for Digital Infrastructure, radio equipment must meet the applicable European requirements to be placed on the market in the EU.
Image unavailable
TP-Link Deco BE68 2-pack
Could suit you if you want mesh coverage in several locations and the option to connect points by cable or wirelessly.
The description lists two points, tri-band Wi-Fi 7 and support for wired and wireless backhaul.
Joybuy
Image unavailable
TP-Link Deco PX10 dual-band Wi-Fi 6
Could suit you if you’re comparing a hybrid mesh set-up for areas that need to be reached over Wi-Fi or another connection between points.
The description lists AV1000 Powerline, three gigabit ports per point, and router and access point modes.
Joybuy
Image unavailable
TP-Link Deco M4 3-pack, dual-band Wi-Fi 5
Could suit you if you want to extend Wi-Fi to several locations with the set of three units that work together.
The product information lists dual-band Wi-Fi 5 and the Deco app to help with set-up.
Joybuy
Image unavailable
TP-Link Deco X50 3-pack, Wi-Fi 6
Could suit you if you want several mesh points and would like to compare the option of a wired connection between them.
The product information lists three points and Wi-Fi 6. TP-Link says the Deco X50 supports optional Ethernet backhaul and has three gigabit ports per point.
Joybuy
Image unavailable
Linksys Velop Pro 7 tri-band Wi-Fi 7
Could suit you if you want to compare a tri-band mesh set-up and have the option to add compatible nodes.
The product information lists Wi-Fi 7, Ethernet ports and the option to expand with compatible nodes.
Joybuy
Frequently asked questions
How can you tell whether mesh will help with uploading photo albums?
Compare a wired speed test at the modem with a test in the loft. If the connection drops off mainly in the loft, look into your Wi-Fi coverage and the connection between points. If the wired upload speed is already disappointing, start with your internet connection.
Where should you place a wireless mesh point for the loft?
Place the point somewhere it can still connect reliably to the network, with as few obstacles as possible between it and the other point. Then test in the loft. A point in an existing dead zone can’t pass on a signal that isn’t there.
What additional equipment and warranty rules should you consider?
Check whether your set-up needs network cables, a switch or extra points. According to the Dutch Government, the Netherlands has no fixed statutory warranty period. If a product doesn’t meet the terms of the agreement, contact the seller.
Can you use mesh Wi-Fi at home in the Netherlands without a licence?
According to the Dutch Authority for Digital Infrastructure, home Wi-Fi usually doesn’t require a licence if you follow the conditions of use. Radio equipment placed on the market in the EU must meet conformity requirements and carry the correct CE marking. Check the specific model and follow the instructions for use.