For viewers behind walls or a floor
If your viewing spot is outside the modem’s strong signal, pay particular attention to the connection between an additional mesh node and the modem.
Start by testing the connection where you watch, then work out how the mesh nodes can connect to one another. If you have an Ethernet cable, Ethernet backhaul is an option. Without a cable, wireless mesh performance depends on placement, while powerline is only an alternative if it works through your electrical wiring in the places you need it. The Consumers’ Association recommends keeping obstacles between wirelessly connected nodes to a minimum. TP-Link and ASUS describe Ethernet backhaul for the Deco X50 and ZenWiFi XD5 respectively.
If your viewing spot is outside the modem’s strong signal, pay particular attention to the connection between an additional mesh node and the modem.
If you can connect your viewing spot or a mesh node by cable, compare systems that support Ethernet backhaul and check how many ports are available.
If you want to keep your current modem, check how the system you choose connects to it and which operating mode suits your network.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Connection between mesh nodes | Check whether Ethernet backhaul is possible. If using powerline, test the connection at the intended sockets. | If you want a reliable connection from the modem to your viewing spot, start by checking the route between the nodes. Around 36% of consumers put this connection first. |
| Coverage where you watch | Test the connection where you watch and compare systems with the same number of mesh nodes. | If you mainly watch in the loft or behind a floor, you’ll want to know whether the signal reaches that exact spot. Around 29% of consumers prioritise coverage where they watch. |
| Connection to your existing network | Check which connections and operating modes are supported by your modem and router. | If you want to keep your provider’s modem, you’ll want to make sure the mesh system can work with your existing network. Around 21% of consumers put keeping their current network first. |
| Overall cost and maintenance | Compare systems with the same number of units and check which software features are included. | If you don’t need extra features or a higher Wi-Fi standard for streaming, you’ll want to pay only for what your setup requires. Around 14% of consumers put cost and maintenance first. |
A mesh node also needs a usable connection to the modem or another node to pass the connection on.
Try placing the node somewhere with fewer obstacles, where it can still connect to the first node. If the connection between them remains weak, check whether Ethernet backhaul is possible.
You may need to reposition the node, add another one or install a cable after all.
A manufacturer’s coverage figures for a particular system don’t prove that your viewing spot in your loft will get a sufficient signal.
Compare systems with the same number of units and test the connection where you watch.
With the Deco PX10, the connection between units also runs through your electrical wiring. General product specifications don’t tell you how well it will work in the places you plan to use it.
Test the connection using the intended sockets, and keep wireless mesh or an Ethernet cable in mind as alternatives.
If the connection doesn’t work as needed there, you may need to reposition the units or install cabling.
TP-Link distinguishes between a free basic plan and a paid Pro plan for HomeShield.
Before buying, check which of the features you want are included in the basic plan and which require Pro.
According to TP-Link, the Deco X50 offers Wi-Fi 6 and supports Ethernet backhaul. The Deco PX10 combines Wi-Fi with powerline for the connection between units.
ASUS states that the ZenWiFi XD5 supports Ethernet backhaul when Ethernet ports are available.
FRITZ! states that the Mesh Set 1700 can be connected to an existing router or modem.
These Joybuy product picks are for anyone looking to use mesh Wi-Fi to extend coverage at home. For the specific version sold in the Netherlands, check the CE marking and accompanying product documentation. The Dutch Authority for Digital Infrastructure outlines the general requirements for radio equipment.
No image available
Could suit you if you want to place mesh nodes in several different locations.
The set includes three units with dual-band Wi-Fi 5 (2.4 GHz and 5 GHz).
Each unit has two Ethernet ports.
No image available
Could suit you if you want to use several mesh nodes to extend coverage in different locations.
The set lists dual-band Wi-Fi 6 (2.4 GHz and 5 GHz). TP-Link states that the Deco X50 supports Ethernet backhaul; check the connection options for your setup.
No image available
Could suit you if you’re looking for a mesh router for a network that can include several units.
The product name lists dual-band Wi-Fi 7.
No image available
Could suit you if you’re looking for a mesh router for a home network with a single network name.
The product name lists dual-band Wi-Fi 6, while the product description mentions mesh and roaming.
No image available
Could suit you if you want to add several mesh nodes to extend coverage.
The set includes two nodes and lists tri-band Wi-Fi 7 (2.4 GHz, 5 GHz and 6 GHz).
Test the connection on your playback device where you watch, then compare it with a test closer to the modem. Netflix explains how to check the network on a TV or connected playback device. The result for Netflix won’t necessarily apply to every documentary streaming service. If your internet speed is still disappointing, you can contact your provider.
Don’t place it only where the signal is weakest: the node also needs to connect to the modem or another mesh node. The Consumers’ Association recommends keeping obstacles between wirelessly connected nodes to a minimum.
No, you don’t automatically need Wi-Fi 7 to stream documentaries. The Consumers’ Association considers Wi-Fi 6 a good-value choice for most people. You should also assess the connection between mesh nodes and the coverage where you watch.
Check the CE marking and conformity documentation for the specific version you want to buy. The Dutch Authority for Digital Infrastructure outlines the general requirements for radio equipment and says that, from 1 August 2025, cybersecurity requirements apply to radio equipment placed on the EU market.
If the product doesn’t meet what you could reasonably expect under normal use, the seller is responsible for providing an appropriate solution. According to ACM ConsuWijzer, this could mean a free repair, replacement or refund. In the Netherlands, the legal guarantee period isn’t simply a fixed two years.