Who is mesh Wi-Fi in a loft right for?

For viewers with a dead zone

Your screen is behind a floor, wall or other obstacle, and the Wi-Fi is weak right where you need it. You want to work out where extra points could improve the connection at your viewing spot.

For viewers with network cables

You can connect mesh points in the loft by cable and want to know whether Ethernet backhaul is suitable for watching a long recording. TP-Link describes Ethernet backhaul as a way to transfer data between Deco units over a cable.

For viewers who want a simple set-up

You already use a modem from your provider and want to check in advance how a mesh system connects to it, which mode you need, and how many points and ports will suit your set-up.

Which factors matter most?

Check your existing network first

Best if: a wired speed test is also disappointing, or moving the modem could improve the signal by the screen.

Trade-off: you may not need a new system, but you can’t always move the modem freely.

Mesh with Ethernet backhaul

Best if: there is, or you can install, a suitable cable route between the modem and the mesh points.

Trade-off: the cable replaces the wireless connection between the connected points, but you’ll need to consider installation, ports and any switches.

Fully wireless mesh

Best if: running cables isn’t practical and you can place the points where they have a strong connection to one another.

Trade-off: you avoid running cables, but a point placed where the signal is weak will also have a weak connection.

One wired access point

Best if: only the viewing spot needs extra coverage and there’s already a suitable network cable there.

Trade-off: you may not need multiple mesh points. Check how network management and network names work if you also use an access point elsewhere.

Consideration What should you check? Who is this important for?
Coverage at the viewing spot Map out the positions of the modem, intermediate point and screen. Test the connection by the screen and look out for obstacles. If I watch from behind a wall, I want to know whether the points can reach one another along that route and where they’ll work best. Around 36% of consumers prioritise coverage at the viewing spot.
Connection between the points Check that the exact model supports Ethernet backhaul and that the cable route and available ports are suitable. When watching a long recording, I don’t want the connection between the mesh points themselves to be the weak link. Around 29% of consumers prioritise stable backhaul.
Modem and installation Check the model’s modes, the connections on your provider’s modem and the cabling needed for your chosen set-up. I want to know how the system connects to my provider’s modem and which settings I’ll need. Around 21% of consumers prioritise a suitable, straightforward installation.
Total running costs Allow for all the points and cables you’ll need, plus any PoE components, and compare energy consumption too. I want to include the components I need and their running costs, not just the price of the system. Around 14% of consumers prioritise total running costs.

Which purchasing mistakes can you avoid?

  • Focusing only on the stated range or maximum Wi-Fi speed

    Obstacles and placement affect the connection at your viewing spot. A stated coverage area isn’t a measurement of your loft.

    First decide where the modem, points and screen will go, then test the connection at your final viewing spot.

  • Putting a wireless point in the dead zone

    The intermediate point also needs a usable connection to the previous point. The Consumentenbond recommends keeping obstacles between Wi-Fi points to a minimum.

    Place the point where it still gets a good signal from the previous one, or check whether wired backhaul is possible.

  • Assuming every PoE switch can power every mesh point

    For the Deco X50-PoE, TP-Link lists support for IEEE 802.3at and 802.3bt, but not 802.3af. This requirement applies to this model and doesn’t automatically apply to other mesh systems.

    Before buying, check the PoE standard and the available power budget of your power supply.

    A compatible injector or switch and network cables may also be needed for your set-up.

Which brands are worth considering?

TP-Link

The Deco range includes the X50 and the separate X50-PoE, offering different cabling and mounting options.

  • TP-Link lists three gigabit ports on each Deco X50 unit. The X50-PoE supports PoE and can be mounted on a wall or ceiling.
  • For PoE power on the X50-PoE, TP-Link specifies IEEE 802.3at or 802.3bt; 802.3af is not supported. The stated speeds and coverage areas aren’t measurements of your loft.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh range for anyone considering, among other things, a wired connection between points.

  • ASUS describes Ethernet backhaul for use with suitable wall sockets and offers a choice of network naming options.
  • To benefit from the 160 MHz bandwidth mentioned by ASUS, you’ll need compatible devices. The manufacturer warns that 160 MHz on 5 GHz isn’t available in every region.

NETGEAR

The Orbi 870 Series is a Wi-Fi 7 option for households looking to make use of multi-gig connections or many devices at once.

  • NETGEAR lists an option for 2.5-gigabit wired backhaul with the RBE873B system.
  • That connection option alone doesn’t prove it will improve the experience of watching a single theatre recording. Your other network equipment and connection need to be suitable too.

Joybuy products for mesh Wi-Fi in a loft

This selection includes mesh systems for a loft, with a focus on wired backhaul where available and connecting to an existing modem.

TP-Link Deco BE68 2-pack mesh system

TP-Link Deco BE68 2-pack

A mesh system for anyone who wants the option of wired or wireless backhaul.

The description lists three different Ethernet ports per unit.

View at Joybuy
ASUS ZenWiFi BT8 tri-band Wi-Fi 7 mesh system, 2-pack

ASUS ZenWiFi BT8 2-pack

A mesh system for anyone looking to install two units and use the ASUS Router app for set-up.

Tri-band Wi-Fi 7 (802.11be).

View at Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

A mesh system for anyone considering wired backhaul and set-up through the ASUS Router app.

Dual-band Wi-Fi 7 (802.11be).

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600

A mesh router for anyone looking to use the HUAWEI SmartLife app for set-up and management.

Dual-band Wi-Fi 7; the description lists one network name for the mesh network.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000

A mesh router for anyone looking to use the Huawei AI Life app for set-up and management.

Dual-band Wi-Fi 6; the description lists a single network name.

View at Joybuy

Frequently asked questions

How can I tell whether mesh will stop a theatre recording from buffering?

First, compare a wired speed test with the connection at your viewing spot. If the wired test is also disappointing, look into your provider’s connection: mesh won’t increase your internet speed. Netflix recommends at least 5 Mbps for 1080p and 15 Mbps for 4K; your theatre platform may have different requirements.

Where should I place a wireless mesh point?

Don’t automatically put it in the dead zone by the television: the point also needs a good connection to the previous one. The Consumentenbond recommends keeping obstacles between the points to a minimum. Once installed, test the connection at your viewing spot.

Do I need Ethernet backhaul for mesh in a loft?

Not always. Wired backhaul is an option if there’s a suitable cable route, or you can install one. TP-Link explains that Deco units then exchange data over Ethernet. Check which modes and ports your model supports.

Can any PoE switch power a Deco X50-PoE?

No. TP-Link specifies IEEE 802.3at or 802.3bt for the Deco X50-PoE, not 802.3af. TP-Link also says a DC adapter is included as an alternative power supply. Check the standard and power budget of the supply you plan to use for your set-up.

What should I look for in the CE marking on mesh Wi-Fi?

Check the marking and applicable conformity information for the exact model you’re considering. The Dutch Authority for Digital Infrastructure outlines the requirements for radio equipment sold in the EU. Information about a similar model doesn’t automatically confirm that the model on offer complies.