Who is this advice for?

Presenting in the loft with an unreliable connection

You share your screen or give presentations during online meetings, and find that interruptions are most common in the loft. Compare the connection there with the one by your router before choosing a mesh system. VodafoneZiggo describes issues with video calls, while the Consumers’ Association highlights the importance of where you place your Wi-Fi points.

A homeowner who can run a cable between floors

You can run a cable to the loft or landing and want to decide whether to use it for a Wi-Fi point, and whether PoE power is suitable. TP-Link and ASUS describe Ethernet backhaul; TP-Link lists specific installation and power requirements for the X50-PoE.

A homeowner keeping their provider’s router

You want better Wi-Fi coverage in the loft without replacing your existing router. Check which features remain available in access point mode; TP-Link describes the limitations for Deco systems.

What should you look for when choosing?

First, compare the connection by your router with the one in the loft. Then check whether you can run a cable and which mesh set-up will work with the router you want to keep.

What to consider What to look for when buying Who is this important for?
Reliable presentations Compare the connection by your router with the one in the loft; an extra Wi-Fi point won’t fix a problem that already occurs by the router. When I present from the loft, I don’t want the picture or audio to cut out. Around 36% of consumers prioritise reliability during presentations.
Connection between floors Check whether Ethernet backhaul is possible. Without a cable, a wireless intermediate point will only work if it still has a usable connection itself. I want to know how the network reaches the loft: via Ethernet, a wireless intermediate point or powerline. Around 29% of consumers prioritise the connection between floors.
Keeping your existing router Check whether your chosen mesh system works in access point mode and which features remain available in that mode. If I want to keep my provider’s router, I want to know in advance which features will change with the set-up I choose. Around 21% of consumers prioritise keeping their existing router.
Total cost and installation Choose the number of points and any cable or PoE power to suit your set-up. Also check the CE marking on the version being offered; the Dutch Authority for Digital Infrastructure describes the applicable requirements for radio equipment on the Dutch market. I only want to buy extra points or power supplies if my home needs them. Around 14% of consumers prioritise the total cost.

Common buying mistakes

  • Assuming the advertised coverage area guarantees coverage in the loft

    TP-Link notes that actual coverage and throughput depend in part on building materials, obstacles and where the equipment is placed. An advertised coverage area won’t automatically predict the connection in your home.

    Test the locations you have in mind, then decide how many mesh points you need.

    If the equipment isn’t in a suitable location, you may still need an extra point or a cable run.

  • Treating the Deco X50 and X50-PoE as the same model

    The X50-PoE has its own installation and power requirements. TP-Link specifies PoE power via 802.3at or 802.3bt; 802.3af is not supported.

    Check the full model name, the number of points and the power supply required for the package.

    You may need a suitable PoE power source to supply power over the network cable.

  • Expecting all mesh router features to work in access point mode

    TP-Link notes that some advanced Deco features aren’t available in access point mode.

    Check in advance which router settings you use and which device will manage them after installation.

  • Assuming powerline is the same as Ethernet backhaul

    According to devolo, actual powerline performance depends, among other things, on interference and the quality of your electrical wiring. Powerline uses your mains wiring, not an Ethernet cable.

    Assess powerline using the sockets you plan to use, and don’t rule out an available network cable without good reason.

    If the connection through the sockets you choose isn’t good enough, you may need to use a different connection route.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh option with optional Ethernet backhaul. The X50-PoE is a separate model designed for installation with a suitable PoE power supply.

  • According to TP-Link, each Deco X50 point has three gigabit ports; Ethernet backhaul is also available in access point mode.
  • The X50-PoE has different connections and power requirements. Not all Deco router features are available in access point mode.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option to compare if you’re considering Ethernet backhaul and customisable Wi-Fi network names.

  • ASUS describes a wired connection between XD5 points.
  • According to ASUS, 160 MHz availability on 5 GHz may vary by country; an advertised maximum speed won’t predict performance in your loft.

FRITZ!

The FRITZ!Repeater 3000 AX is worth considering to extend an existing FRITZ! mesh network; it’s a repeater, not a standalone router-and-satellite set.

  • FRITZ! lists three radio bands and two gigabit LAN ports for this model.
  • The mesh functionality described assumes a compatible FRITZ!Box as the central device.

devolo

According to devolo, Magic 2 WiFi 6 next combines powerline and mesh Wi-Fi. It may be worth considering if running a cable isn’t practical and wireless coverage between floors is poor.

  • The adapters connect to each other via your mains wiring.
  • Devolo notes that interference and the quality of your electrical wiring affect actual powerline performance.

NETGEAR

According to NETGEAR, the Orbi RBK763S is a tri-band Wi-Fi 6 set with one router and two satellites, designed to be compared as a complete mesh system.

  • The product description lists a combination of router and satellites.
  • Advertised speeds and coverage aren’t measurements taken in your home; check the exact package and where you plan to place it.

Joybuy products for mesh Wi-Fi in the loft

This selection includes mesh sets for loft coverage, with models designed for either a wired or wireless connection between mesh points. Compare the model and possible placement with your home before deciding how many points you need.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68 (2-pack)

A good option to compare if you’re weighing up wired backhaul as well as wireless mesh; check that the connection route you choose suits your home.

The product name specifies a set of two.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack) Wi-Fi 6

An option to compare if you want to use Ethernet backhaul between mesh points; TP-Link describes this as a feature of the Deco X50.

The product name specifies a Wi-Fi 6 set with three points and 2.4 and 5 GHz bands.

View at Joybuy
TP-Link Deco XE75 tri-band Wi-Fi 6E

TP-Link Deco XE75 Tri-band Wi-Fi 6E

Compare this model if you’re looking for a tri-band mesh option; check that the bands and set-up meet your network needs.

The product name specifies tri-band Wi-Fi 6E with 2.4, 5 and 6 GHz bands.

View at Joybuy
TP-Link Deco X50-PoE, 3-pack, Wi-Fi 6

TP-Link Deco X50-PoE (3-pack) Wi-Fi 6

Worth considering if you want to connect a mesh point by cable and mount it in a suitable location.

The product name specifies a Wi-Fi 6 set with three points and 2.4 and 5 GHz bands. TP-Link lists 802.3at or 802.3bt for PoE power; 802.3af is not supported.

View at Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack) Wi-Fi 6

An option to compare if you’re looking for a smaller set that can use Ethernet backhaul; TP-Link describes this as a feature of the Deco X50.

The product name specifies a Wi-Fi 6 set with two points and 2.4 and 5 GHz bands.

View at Joybuy

Frequently asked questions

How do I decide where to put the second mesh point?

Test the connection where you plan to put it and compare it with the connection in the loft and by the router. A wireless point needs a usable connection itself, so don’t automatically put it where the Wi-Fi signal already drops out. Building materials and obstacles mean an advertised coverage area is no guarantee.

Can I keep my provider’s router?

Yes. According to TP-Link, a Deco system can work alongside an existing main router in access point mode. Among other things, that router will continue to assign IP addresses, and some advanced features won’t be available in the Deco app. Check which features you need from the exact model.

What maintenance should I do after installation?

Keep your router and mesh equipment up to date. ACM ConsuWijzer highlights the importance of updates for network security; check how updates are provided and installed for the equipment you choose.

Do I need a permit or registration to use Wi-Fi at home?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used in the Netherlands without a permit, notification or registration, provided you meet the specified conditions. You must still comply with the conditions for using radio frequencies and the requirements for equipment sold on the Dutch market.

Does my statutory guarantee end after two years?

No. A stated two-year manufacturer’s or seller’s guarantee doesn’t automatically mark the end of your statutory rights. ACM ConsuWijzer explains that your statutory guarantee depends on what you could reasonably expect from the product with normal use.