Who is this choice relevant to?

Household with weak loft Wi-Fi

Wants to stream media in a converted loft and needs to check whether the signal between floors is usable or whether a cable is needed.

Household with a cable to the loft

Can connect a loft access point by cable and wants to keep the media server and any wired playback devices accessible.

Household with an existing ISP router

Wants to extend Wi-Fi without unintentionally changing the network setup that the media server and playback devices rely on.

What should you look for when choosing?

Mesh with wired backhaul

When: If there’s a usable ethernet cable to the loft, or you can run one.

Trade-off: The connection between mesh points runs over the cable, but installation requires cabling and sometimes a switch. TP-Link says its wired Deco connection is more stable and faster than Wi-Fi; this is not a measurement taken in your home.

Fully wireless mesh

When: If running a cable isn’t practical and an intermediate point can still make a usable connection to the main network.

Trade-off: You don’t need to run a cable between the points, but walls, ceilings and positioning can affect the signal. Adding a point somewhere without a usable connection won’t solve the problem on its own.

Wired access point

When: If your existing network works well elsewhere and you mainly need extra Wi-Fi in the loft.

Trade-off: One access point could be an alternative to a complete mesh system, but check that it suits your preferred network setup and the way you manage your current system.

If you’re considering mesh to access a media server in a converted loft, key things to consider include the connection in the loft, access to wired devices and compatibility with your existing router.

What to consider What should you check? Who is this more relevant to?
Connection to the loft Check where you can place the points and whether the connection to the main network is usable where the media player will be. A stated coverage area is no guarantee for your home. If the media player in the loft needs to access the server, I want to know whether the signal between floors is usable. Around 36% of consumers prioritise the connection to the loft.
Server and wired devices Count the ports on each unit after mapping out the uplink and any backhaul. Also check whether the network mode will work with your server and playback devices. I want to access the server from a wired TV or computer and know how many connections will remain free. Around 29% of consumers prioritise access to the media server and wired devices.
Existing router Check whether the system can work behind your current router and which router or access point mode you’ll need. I want to keep my existing network and avoid putting the server and players on networks where they can’t reach one another. Around 21% of consumers prioritise compatibility with their existing router.
Setup required Map out the number of points you’ll need, the cable route and any switch before choosing a system. I don’t want to set up more equipment than my loft and existing network need. Around 14% of consumers prioritise choosing a setup that’s the right size overall.

Common pitfalls

  • Assuming the stated coverage guarantees a signal in the loft

    Walls, ceilings and the positioning of mesh points affect the actual range. Consumentenbond notes that not every system it tested delivers good coverage.

    Assess the connection between floors and test it where you plan to put the media player.

    If the connection isn’t good enough there, you may still need an extra point or a cable.

  • Counting every ethernet port as available for playback devices

    You may need a port for the uplink or wired backhaul. The number of connections on each point varies by model.

    Plan the cable route, then count how many ports will be free on the loft point.

    If you don’t have enough ports left, you may need a switch or a different unit with more connections.

  • Assuming all Wi-Fi points work together as one mesh

    Compatibility varies by system and generation. Google says that Nest Wifi Pro cannot be used in one mesh with older Nest Wifi or Google Wifi points.

    Before buying, check that the exact generation and network mode will work with your existing equipment.

Brands to compare

TP-Link

The Deco X50 is worth considering if you want to compare wired backhaul and the number of connections on each unit.

  • According to TP-Link, the Deco X50 has three gigabit ports per unit and supports optional ethernet backhaul.
  • Wiring options vary depending on the router or access point mode. The stated wireless speed and coverage aren’t measurements taken in your loft.

FRITZ!

The FRITZ!Mesh Set 1600 is worth considering if you want to set up multiple points and assess how they’ll connect to an existing router.

  • FRITZ! describes how to install the system behind an existing router and provides a LAN connection on each repeater.
  • Consumentenbond lists one ethernet port per point for the set it tested. Check whether you’ll have enough connections left after planning your cabling.
  • The manufacturer’s warranty quoted by FRITZ! is separate from the statutory guarantee in the Netherlands.

ASUS

ZenWiFi BD4 and AiMesh are worth considering if you want to compare ports and network modes for a wired mesh setup.

  • ASUS specifies two auto-detecting 2.5GbE WAN/LAN ports per unit for the BD4, as well as an access point mode.
  • ASUS provides separate instructions for backhaul through a switch. The port specification doesn’t prove that you’ll be able to access your media server faster at home.

Google

Nest Wifi Pro is worth considering if you’re looking at an expandable mesh setup with optional cabling between compatible points.

  • Google confirms that Nest Wifi Pro supports ethernet backhaul.
  • According to Google, Nest Wifi Pro can’t be combined in one mesh with older Nest Wifi or Google Wifi points. The stated coverage isn’t a measurement taken in your loft.

Mesh products at Joybuy

This selection of Joybuy products includes mesh systems for households looking to extend Wi-Fi between their existing network and a converted loft.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 (2-pack)

An option to compare if you’re considering a mesh system with two points and want to factor wired backhaul into your choice. Check the connections and network mode you’ll need in advance.

View at Joybuy
TP-Link Deco E4 3-pack

TP-Link Deco E4 (3-pack)

A set of three mesh points to consider if you want to position points in several places around your home.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco M4 3-pack

TP-Link Deco M4 (3-pack)

A set of three mesh points to compare if you want to add a mesh point in several areas of your home.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 5 (802.11ac).

View at Joybuy
TP-Link Deco X50 3-pack

TP-Link Deco X50 (3-pack)

A set of three mesh points to consider if you want to assess a connection to the loft with optional ethernet backhaul. Check the cable route and network mode.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).

View at Joybuy
Linksys Velop Pro 7 mesh system

Linksys Velop Pro 7

A mesh option to compare if you want to connect wired devices to mesh points. Check which version and connections suit your setup.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz. Wi-Fi 7 (802.11be).

View at Joybuy

Frequently asked questions

Do I need a frequency licence for home mesh Wi-Fi?

According to the Dutch Authority for Digital Infrastructure, ordinary Wi-Fi use in the Netherlands on the designated licence-exempt frequencies does not require a licence, notification or registration. Licence-exempt doesn’t mean free from interference: the frequency bands are shared and conditions of use apply.

How do I connect Deco points by cable if I keep my existing router?

It depends on the network mode you choose. According to TP-Link, in the standard router mode you connect a satellite to the LAN side of the main Deco; in access point mode, TP-Link also says you can connect it through your existing main router. After installation, check in the app that the backhaul is actually running over ethernet.

What should I check if the TV in the loft can’t find the media server?

First check whether the TV and server can reach each other on the intended local network. Synology provides network checks for a DLNA player that can’t be found; according to Synology, Synology Assistant can’t automatically find devices on a different subnet. The solution depends on your server, playback app and network settings.

Are the manufacturer’s warranty and statutory guarantee in the Netherlands the same thing?

No. According to ACM ConsuWijzer, statutory guarantee is separate from a manufacturer’s or seller’s warranty. The statutory guarantee period isn’t automatically two years; it depends on what you can reasonably expect from the product. The retailer is your point of contact.

What marking should Wi-Fi equipment sold in the Netherlands carry?

The Dutch Authority for Digital Infrastructure states that radio equipment sold in Europe must meet the applicable requirements and carry a CE marking. Check the marking on the device being offered: a product name or web listing on its own doesn’t confirm that a specific item carries the marking.