Who is this setup for?

Teacher with a teaching space in the loft

Your main concern is whether your video and audio will stay connected in the loft. Compare the route between your router and teaching space, then test the connection where you’ll be teaching.

Household with several people online at once

Other people may be using laptops or phones during your lesson. Focus on the connection and capacity in practice, rather than just the Wi-Fi standard or stated top speed. The Consumentenbond points out that the Wi-Fi standard alone says nothing about performance.

Hosting students

If students bring their own devices, separate guest access may be useful. Check how this feature works on the mesh system you’re considering.

What should you look for?

Mesh with Ethernet backhaul

A good fit when: you can run a suitable network cable to the loft and want to connect the mesh nodes by cable.

Bear in mind: you’ll need to plan the cable route and may need installation work.

Wireless mesh between floors

A good fit when: running a cable isn’t practical and you can place an intermediate node where the existing network still has a strong signal.

Bear in mind: where you place the nodes and the wireless connection between them both affect the signal reaching your teaching space.

What to consider What to look for Who it matters most to
Connection in the loft Check whether Ethernet backhaul is possible, and test the connection during a practice call in your teaching space. If I teach in the loft, I want my video and audio to stay connected there. Around 36% of consumers say a connection in the loft is their top priority.
Several people online at once Compare the Wi-Fi capabilities of your teaching devices with your mesh setup; the Wi-Fi standard alone won’t predict performance. If other people at home are online during my lessons, I want to take the connection with multiple devices into account. Around 29% of consumers prioritise simultaneous use.
Guest access Check whether the version you’re considering offers guest Wi-Fi and how to set it up. If students use their own devices for lessons at my home, I want to be able to manage their access separately. Around 21% of consumers say guest access is their top priority.
Installation and number of nodes Decide where the router will go and where the mesh nodes will have access to power and, if needed, Ethernet; compare the size of the set with the number of floors. If I want to avoid running a cable or adding extra nodes, I weigh up the installation and number of nodes carefully. Around 14% of consumers put installation and costs first.

Buying pitfalls

  • Assuming the stated coverage guarantees a signal in the loft

    Your home’s layout and where you place the nodes both affect whether the teaching space gets a usable connection.

    Plan the mesh nodes from your existing router and test the connection where you teach. Consider Ethernet backhaul if the connection between floors is weak.

  • Choosing a newer Wi-Fi standard without comparing other features

    The Consumentenbond points out that the Wi-Fi standard alone says nothing about the performance of a particular setup.

    Before choosing, compare the coverage, placement and connections with what your teaching devices can support.

  • Assuming sets with different numbers of nodes are the same version

    A different set size may mean your setup doesn’t include as many nodes as you expected.

    Check the full model name and the number of mesh nodes included in the version on offer.

Brands to compare

TP-Link

Deco offers mesh systems such as the Deco X50, which you can compare if you’re considering wireless placement and the option of Ethernet backhaul.

  • TP-Link specifies optional Ethernet backhaul for the Deco X50.
  • A manufacturer’s stated coverage isn’t a guaranteed range in your loft; consider your home’s layout and node placement separately.

FRITZ!

The three-node FRITZ!Mesh Set 1700 is an option to compare if you want to cover several rooms.

  • FRITZ! describes the set as three FRITZ!Repeaters 1700, to be used with a router or existing modem.
  • This doesn’t automatically confirm compatibility with every existing home setup, so check that it will work with your equipment.

ASUS

ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh range to compare if you’re considering wired connections and Ethernet backhaul.

  • ASUS specifies two 2.5G Ethernet ports and wired backhaul for the BD4.
  • The port specification applies to this model; Wi-Fi 7 alone doesn’t prove you’ll get a better connection for lessons in your home.

KPN

SuperWifi nodes are worth comparing if you already have a compatible KPN home network.

  • KPN describes features such as placement assistance and guest Wi-Fi in its management interface.
  • Check the specific generation and how it works with your existing modem; these features aren’t automatically available on every provider’s nodes.

devolo

Magic 2 WiFi next uses your home’s electrical wiring to communicate. It’s another option to explore if there’s no network cable to the loft.

  • devolo lists two additional gigabit LAN ports and the option to expand with Magic adapters.
  • According to devolo, adapters from the older dLAN range aren’t supported. The connection you can achieve depends on your home’s electrical wiring.

Mesh systems at Joybuy

These product options are mesh systems designed to connect multiple rooms. Match the number of nodes and the connection route to your loft layout, and check the CE marking on the exact version before buying.

ASUS ZenWiFi BT8 two-node mesh system, tri-band Wi-Fi 7, white

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7, white

A two-node mesh system to compare for connecting multiple rooms. Check that the version on offer suits your placement plan and guest access requirements.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco X50 mesh system with three nodes, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

A three-node set for planning coverage across multiple rooms. TP-Link lists optional Ethernet backhaul for the Deco X50; check the connections available on this version before planning a cable route.

Dual-band: 2.4 GHz and 5 GHz; Wi-Fi 6 (802.11ax).

Joybuy
Linksys Velop Pro 7 tri-band mesh system, Wi-Fi 7

Linksys Velop Pro 7, tri-band Wi-Fi 7

A mesh system to compare for connecting multiple rooms; plan the placement around the route from your router to the loft.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be).

Joybuy
ASUS ZenWiFi BT10 two-node mesh system, tri-band Wi-Fi 7, white

ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7, white

A two-node mesh system for planning coverage across multiple rooms. Check the placement and make sure the version offers the guest access you need.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 7 (802.11be).

Joybuy
TP-Link Deco XE75 Pro mesh system with three nodes, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

A three-node set for planning coverage across multiple rooms. Compare the number of nodes with the number of floors and where you intend to place them.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz; Wi-Fi 6E (802.11ax).

Joybuy

Frequently asked questions

Is a two-node set enough for a converted loft?

You can’t tell without testing it in your teaching space. The Consumentenbond’s buying guide says two nodes are often enough for a home and notes that you can add more; the coverage you need depends on the layout and placement.

Where should you start if the connection drops during a lesson?

First, check the connection in the loft and where the mesh nodes are placed. If possible, compare a wired connection between the nodes, then test using the devices and video-calling service you use during lessons.

Do you need guest Wi-Fi for students who visit?

Guest Wi-Fi is useful if students bring their own devices and you want to manage their access separately. Check whether the exact mesh system offers this feature and how to set it up.

Can you use your own mesh router with your internet connection?

ACM ConsuWijzer confirms that you can choose your own router. However, your provider’s safety and network requirements still apply to the connection, so ask for the necessary settings if needed. Adding a mesh node behind an existing modem is a different setup from replacing the modem.

Does mesh Wi-Fi need a CE marking in the Netherlands?

Yes. Equipment sold in the Netherlands as radio equipment must meet the relevant European requirements and carry a CE marking. The Dutch Authority for Digital Infrastructure states that the marking must appear on the equipment; check the exact version before buying.