Who is mesh Wi-Fi suitable for?

Someone working from home in a loft with a weak signal

You work in a converted loft and mainly want to improve the connection between floors. Whether you can use an Ethernet cable will influence your choice of setup.

Someone working from home with a desktop computer

You want Wi-Fi for mobile devices, as well as a usable Ethernet port by your desk or a wired connection to the point in the loft.

If you want to keep your workspace compact

You want to check whether two well-placed points will be enough before buying a third.

What should you look for when choosing?

First, decide how the connection will reach the loft: through an Ethernet cable between the points, or wirelessly from a location with a strong enough signal. Then consider how many points and available connections your workspace needs, and how the system will work with your modem router.

What to consider What should you look for? Who is this important for?
Signal reaching the loft Check whether the points support Ethernet backhaul. If not, choose an intermediate location with a strong enough wireless signal. If your main aim is to improve the connection between floors, signal reaching the loft is your priority. Around 36% of consumers put this need first.
Ports for work equipment Count the Ethernet ports on each point and work out which ones you’ll need for the router, the connection between points and your computer. If you use a desktop computer, you’ll want to know whether a wired connection will still be available by your desk. Around 29% of consumers prioritise this connection.
Number of Wi-Fi points For two floors, start with two points and check the connection at your workspace before expanding the setup. If you want to keep your setup compact, you won’t want to add an extra point before you know whether it’s needed. Around 21% of consumers say having fewer devices is their main priority.
Existing modem router Check which router or access point modes are available and which features remain available in each mode. If you want to keep using your current modem router and avoid unnecessary costs, check which mode is suitable beforehand. Around 14% of consumers prioritise keeping their existing router and keeping costs down.

Avoiding common buying mistakes

  • Assuming the stated coverage guarantees a signal in the loft

    The position of the points and the connection between them both affect whether the signal reaches your workspace. A stated coverage area isn’t a measurement taken in your home.

    Check the connection in the loft after installation. If a floor weakens the wireless signal, compare the option of a wired connection between the points.

  • Choosing a three-point set without testing first

    For two floors, the Consumentenbond recommends starting with a set of two points. A third point isn’t automatically necessary in a compact home.

    Start with a setup that suits your home’s layout and check the signal at your workspace before expanding. Also check whether you can add more points later.

  • Assuming access point mode retains every feature

    According to TP-Link, some advanced Deco features aren’t available when the system is running in access point mode.

    Decide in advance which router should manage your network, and check which features are available in the mode supported by the model you’ve chosen.

  • Mistaking a single unit for a complete set

    A package containing one router or two points isn’t the same as a set of three points. The version you choose may therefore differ from the setup you thought you were comparing.

    Before buying, check the full model name and the number of devices in the box.

Brands to compare

TP-Link

The Deco range includes systems for wireless and wired connections between Wi-Fi points. The Deco X50 is a Wi-Fi 6 example, with three gigabit ports per unit.

  • TP-Link lists Ethernet backhaul as a feature of the Deco X50.
  • According to TP-Link, some advanced Deco features aren’t available when using Deco in access point mode.

ASUS

According to ASUS, the ZenWiFi BD4 is a dual-band Wi-Fi 7 mesh system with two 2.5G ports per unit.

  • ASUS lists router, access point and AiMesh node modes for the BD4.
  • Wi-Fi 7 and 2.5G ports don’t, by themselves, prove that your loft connection will be faster. Check the set configuration and your existing equipment too.

FRITZ!

According to FRITZ!, the Mesh Set 1700 can be used with a FRITZ!Box or another router. Sets are available with two or three repeaters.

  • According to FRITZ!, the Repeater 1700 has one gigabit LAN port and can be connected to the router via LAN.
  • If you use that port to connect to the router, check which connection will remain available for a wired computer.

Linksys

Velop Micro 6 is a dual-band Wi-Fi 6 mesh range you can compare for a compact router-and-node setup.

  • Linksys lists a 2.5-Gbps internet port and gigabit ports for wired devices.
  • Check what’s in the box: a standalone router isn’t a set with three points.

Mesh Wi-Fi at Joybuy

These Joybuy products are two-point mesh sets for a compact home office and a connection to the loft, with wired connections and Ethernet ports in mind. The Dutch Authority for Digital Infrastructure lists CE marking as one of the requirements for radio equipment sold in the Netherlands; check the marking on the device.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A two-point mesh option if you want to set up a wired or wireless connection between the points.

Tri-band; three WAN/LAN ports per unit.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack), tri-band Wi-Fi 7

A two-point mesh option for anyone who also wants to consider wired connections at their workspace.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz. Per unit: two 1-GbE ports and two 2.5-GbE ports.

View at Joybuy
TP-Link AX1800 Mesh Wi-Fi 6 (2-pack)

TP-Link AX1800 Mesh Wi-Fi 6 (2-pack)

A two-point mesh option if you want to connect the Deco units with an Ethernet cable.

Wi-Fi 6; the product description lists Ethernet backhaul between the units.

View at Joybuy
ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7

ASUS ZenWiFi BT10 (2-pack), tri-band Wi-Fi 7

A two-point mesh option if you want to compare Ethernet ports at your workspace as well as Wi-Fi.

Tri-band: 2.4 GHz, 5 GHz and 6 GHz. The product specifications list Ethernet ports, including 10-GbE ports.

View at Joybuy
TP-Link Deco X50-PoE (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack), Wi-Fi 6

A two-point mesh option to compare if you need Ethernet ports and PoE support on each unit.

Dual-band: 2.4 GHz and 5 GHz. Two Ethernet ports per unit; PoE support.

View at Joybuy

Frequently asked questions

Where should I put the second point if the loft barely gets Wi-Fi?

Don’t place a wirelessly connected point only where the signal is already poor. Check the connection at an intermediate location and move the point if needed. With a suitable mesh set, you can also connect the points with an Ethernet cable if one is available.

Can I keep using my existing modem router?

That depends on the system you choose and the modes available. According to TP-Link, Deco can work with an existing router in access point mode, with that router continuing to manage the network features. Some advanced Deco features won’t be available in this mode. Follow the installation instructions for your chosen model.

Does a short manufacturer’s warranty mean my rights end afterwards?

No. According to ACM ConsuWijzer, your statutory rights exist alongside any warranty from the seller or manufacturer. If a product breaks through normal use sooner than you could reasonably expect, the seller must provide a suitable free remedy. There isn’t one fixed statutory warranty period for every router.

What should I look out for when buying a Wi-Fi router in the Netherlands?

For radio equipment sold in the Netherlands, the Dutch Authority for Digital Infrastructure lists CE marking among the requirements. Check the marking on the device; appearing on a list doesn’t prove that the individual item sold in a shop has been checked.