Who is this for?

Working from home in the loft

If you work in the loft, a reliable, consistent connection is key. Check whether you can run a network cable upstairs. Tweakers and TP-Link describe wired backhaul as a reliable connection route.

Using a hobby room in a separate location

The location of your hobby room makes a difference: check whether it’s behind internal walls and floors or in a separate building. FRITZ! highlights that the connection between mesh nodes also affects how well the connection works in the room.

Living in a home without a cable route

If you don’t want to run an Ethernet cable, you could look into wireless backhaul or a suitable powerline setup. The connection between mesh nodes still depends on where they’re placed and, with powerline, whether the units are compatible and your electrical installation is suitable.

What should you look for?

First decide how the mesh nodes will connect to each other. Then choose the right number of units and where to place them in both rooms.

What to consider What to look for when buying Who this matters most to
A stable connection in the loft Check whether the system supports Ethernet backhaul and how the mesh nodes connect to your existing router. Also check which Ethernet ports will remain available. If I work in the loft, I want a reliable connection, so I’ll first check whether running a cable is feasible. Around 36% of consumers say a stable connection for work is their main concern when buying.
Coverage in the hobby room Check whether the room is in the same building and which walls or floors are in between. Assess the connection at the intended locations, rather than relying solely on the stated coverage area. For my hobby room, I want to know whether the mesh connection can handle the actual distance and obstacles. Around 29% of consumers say coverage in that room is their main concern when buying.
Installation without a network cable Check the signal at a suitable intermediate location. If you’re considering powerline, check that the units are compatible and can operate on the same suitable electrical network. If I don’t want to run a cable, I want to know in advance whether wireless backhaul will work from a suitable location, or whether my setup can support powerline. Around 21% of consumers say installation without a network cable is their main concern when buying.
Running costs and management Choose the number of mesh nodes to suit your layout and check whether any features you want require a subscription. Factor in the energy use of the system you choose. I want to connect both rooms without unnecessary nodes or recurring costs, and know which features I really need. Around 14% of consumers say running costs and management are their main concern when buying.

Common pitfalls

  • Comparing systems by their stated coverage area alone

    A stated coverage area doesn’t tell you how strong the connection between mesh nodes will be along your route. A node placed where the signal is weak may also have a weak connection to the main unit.

    Consider the rooms, the walls and floors in between, and where you plan to place the nodes. Check the connection in those locations before deciding on the final placement.

    Depending on your layout, you may need an extra node or have to run a cable after all.

  • Assuming all powerline mesh systems are interchangeable

    According to TP-Link, the Deco PX50’s powerline backhaul works between compatible PX50 units on the same electrical network. PX10, P7 and P9 units aren’t interchangeable with the PX50 for this purpose.

    Check the full model name of both units and make sure the sockets are on a suitable electrical connection, especially if the hobby room is in a separate location.

    If an additional unit isn’t compatible, you may need a different connection solution.

  • Assuming advanced security is included as standard

    Some TP-Link HomeShield features require a paid subscription. TP-Link states that subscriptions may renew automatically until cancelled.

    Before buying, check which features you want to use and review the current subscription terms for the Netherlands.

    A subscription feature you choose may involve recurring costs and ongoing management.

Brands to consider

TP-Link

The Deco X50 offers Wi-Fi 6 with Ethernet backhaul, while the Deco PX50 provides a powerline mesh option under specific conditions.

  • TP-Link says the PX50 can also transmit data between units over electrical wiring.
  • This powerline backhaul requires compatible PX50 units on the same electrical network. Don’t assume that other Deco powerline models will work with it.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 model with two 2.5G Ethernet ports; the ZenWiFi XT8 is a tri-band Wi-Fi 6 model with an additional configurable 5GHz band.

  • ASUS lists two 2.5G ports for the BD4 and Ethernet backhaul for the XT8.
  • The BD4 is dual-band, despite using a newer Wi-Fi generation. These model specifications don’t tell you how well a system will perform in a particular location in your home.

FRITZ!

The FRITZ!Mesh Set 4200 is an option if you want to use a system behind your existing router and configure mesh nodes.

  • FRITZ! describes using the system both behind another brand’s router and behind a FRITZ!Box.
  • Check which unit will be the Mesh Master in your setup. The quality of a wireless connection between nodes still depends on where they’re placed.

Mesh products at Joybuy

These mesh systems are designed to provide a connection across multiple rooms. Ethernet backhaul is listed for some models; check the units included with each system, how they connect and how they’ll work with your existing router.

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A good fit for a setup with several mesh nodes if you can use Ethernet backhaul between them.

3-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax); Ethernet backhaul listed as an option.

View at Joybuy
Linksys Velop Pro 7, tri-band Wi-Fi 7

Linksys Velop Pro 7

A mesh option for multiple rooms; check the connection method and placement for your home.

Tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 7 (802.11be); the product description lists two mesh nodes.

View at Joybuy
TP-Link Deco XE75 Pro, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack)

Could suit a setup with several mesh nodes; consider the placement and connection between the two rooms separately.

3-pack; tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco XE75, tri-band Wi-Fi 6E, three-unit set

TP-Link Deco XE75 (3-pack)

A multi-unit system for connecting different rooms; check in advance where you can place the units.

Set of three units; tri-band (2.4 GHz/5 GHz/6 GHz); Wi-Fi 6E (802.11ax).

View at Joybuy
TP-Link Deco X50, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack)

A good fit for a mesh connection between rooms if Ethernet backhaul is possible along the route you want to use.

2-pack; dual-band (2.4 GHz/5 GHz); Wi-Fi 6 (802.11ax); Ethernet backhaul listed as an option.

View at Joybuy

Frequently asked questions

Does a mesh node need to be in the loft to improve coverage there?

Not necessarily. With wireless backhaul, the node also needs a good connection to the main unit. So check the connection both at an intermediate location and in the home office.

Can the Deco PX50 reach the hobby room using any powerline adapter?

No. According to TP-Link, the PX50’s powerline backhaul works between compatible PX50 units on the same electrical network. It doesn’t work with standalone powerline adapters or PX10, P7 or P9 units as PX50 backhaul.

Are security features and the warranty automatically included in full?

Not all security features are available without a subscription: TP-Link charges for subscriptions to certain HomeShield features. Your statutory warranty is separate from any stated manufacturer’s warranty period. According to ACM ConsuWijzer, contact the seller if a product doesn’t meet expectations when used normally.

Do you need a licence or registration to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi on designated frequencies and under the applicable conditions of use doesn’t require a licence, notification or registration. This doesn’t mean that every transmission setting or device is automatically permitted; radio equipment sold in the Netherlands must also meet European product requirements, including CE marking.