Who is this guide for?

Someone with two Wi-Fi dead zones

You want usable Wi-Fi in both the hobby room at the back of the house and the loft. The position of your router, possible midway points, walls and floors all affect which setup will work. The Consumers’ Association notes that walls and ceilings can interfere with the signal.

Someone working from home with specific connection needs

You use a room some distance from the router for video calls or large files, for example, and want to know how the Wi-Fi points connect to one another. Having an Ethernet cable available could change your choice.

Someone with an existing provider or FRITZ! network

You may want to keep your existing network setup, so check the operating mode and compatibility of any extension. FRITZ! describes the FRITZ!Repeater 3000 AX as suitable for use with a compatible FRITZ!Box acting as Mesh Master.

What should you look for in mesh Wi-Fi?

Ethernet backhaul

Choose this if: you have, or can install, a usable Ethernet cable running to one of the rooms some distance from the router.

Bear in mind: you’ll need to run the cable and configure the network correctly. Connections vary by model: ASUS lists two 2.5G Ethernet ports for the ZenWiFi BD4, while TP-Link lists three Gigabit ports per point for the Deco X50.

Wireless mesh

Choose this if: running cables isn’t practical and you can place a midway point somewhere the existing Wi-Fi signal is still usable.

Bear in mind: distance, walls and ceilings affect the connection between points. An advertised speed or coverage figure won’t tell you how the system will perform in your home.

Powerline backhaul

Consider this if: you can’t run a cable and a wireless connection between the points seems tricky. TP-Link describes the Deco PX10 as a system that combines Wi-Fi with data transmission over your existing electrical wiring.

Bear in mind: the connection also depends on your electrical wiring. The advertised powerline class isn’t a measurement of performance at the sockets in your home.

Extending an existing FRITZ! mesh network

Consider this if: you already use a compatible FRITZ!Box as Mesh Master and want to check whether a repeater will be enough.

Bear in mind: this mesh option assumes you have a compatible FRITZ! setup. Don’t expect the same features with an arbitrary provider-supplied router without checking first.

What to consider What to check before buying Who should pay particular attention?
Coverage in both rooms Check how many points are included and where you can position them. Test each room separately; the Consumers’ Association recommends placing a Wi-Fi extender where the signal is still usable. If you need Wi-Fi both at the back of the house and in the loft, you’ll want to know whether both areas are within reach. Around 36% of consumers say coverage in both rooms is their top buying priority.
Connection between points Check whether the model supports Ethernet or powerline backhaul. Test wireless positioning or powerline at the locations you have in mind. If you use a room some distance from the router regularly, the way it connects to the rest of the network matters too. Around 29% of consumers prioritise the reliability of that connection.
Compatibility with your network Make a note of your router model and check the operating mode, mesh compatibility and any LAN backhaul support for the exact devices you have. If you want to keep your router or existing mesh points, the new system needs to work with your setup. Around 21% of consumers say compatibility with their existing network is their top priority.
Ports and running costs Count the available Ethernet ports on each point, and check power consumption and any terms that apply to management or security features. If you have wired devices in the hobby room or loft, ports and ongoing costs may matter. Around 14% of consumers put connections and running costs first.

Common buying mistakes

  • Assuming the advertised coverage guarantees a signal in both rooms

    A coverage figure in square metres doesn’t reflect the layout of your home. Distance, walls and ceilings can all affect the signal.

    Test the hobby room and loft separately, and check the connection between the mesh points too.

    If the points aren’t positioned well, you may still need a midway point or a cable run.

  • Taking AV1000 or combined Wi-Fi speeds as real-world speeds

    These are product labels or advertised speeds, not measurements taken at the sockets and devices in your home.

    Choose your backhaul based on the cables you have, and test the connection where you plan to put the points.

  • Assuming a product name confirms exactly what’s included

    A label such as 2-pack or EU+UK doesn’t automatically tell you which accessories come with that specific version.

    Before buying, check the exact model variant, box contents, plugs and applicable warranty terms.

  • Confusing the manufacturer’s warranty with your statutory rights

    The manufacturer’s warranty doesn’t automatically limit your statutory rights. ACM ConsuWijzer explains that statutory warranty in the Netherlands doesn’t have a general fixed end date of two years.

    Keep your proof of purchase and contact the retailer if the product is faulty. Keep your statutory rights separate from any additional manufacturer terms.

Brands to consider

TP-Link

The Deco X50 and PX10 offer different ways to connect Wi-Fi points.

  • TP-Link says the X50 has three Gigabit ports per point and optional Ethernet backhaul. The PX10 also has three ports per point, according to the manufacturer, and can additionally use your existing electrical wiring.
  • Advertised wireless and powerline speeds aren’t measurements taken in your home. Compare the full model name and the number of units in the set.

ASUS

The ZenWiFi BD4 is a dual-band Wi-Fi 7 option with AiMesh and wired backhaul support.

  • ASUS specifies two 2.5G Ethernet ports for the BD4.
  • Here, dual-band means 2.4 and 5 GHz, not a separate third radio band. An advertised speed doesn’t prove that the signal will reach better through floors.

FRITZ!

FRITZ!Repeaters are most relevant if you already use a compatible FRITZ!Box as Mesh Master.

  • FRITZ! describes the FRITZ!Repeater 3000 AX as part of a FRITZ! mesh network and supports a LAN connection to a FRITZ!Box.
  • Don’t assume you’ll get the same integrated mesh features with every other router.

NETGEAR

The Orbi 770 RBE772 is a tri-band Wi-Fi 7 set for anyone looking into wireless or wired backhaul options.

  • NETGEAR lists tri-band support and 2.5G connections for this set.
  • These are manufacturer specifications, not an independent comparison or a guarantee of coverage in your home.

Mesh Wi-Fi at Joybuy

These Joybuy products are mesh Wi-Fi systems designed to connect multiple rooms; the models and set sizes listed vary.

TP-Link Deco BE68, 2-pack

TP-Link Deco BE68 2-Pack

Worth considering if you’re looking for a mesh setup with two units and wired or wireless backhaul.

Product name: 2-pack.

View at Joybuy
ASUS ZenWiFi BT8, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 2-Pack

An option to consider if you’re looking at a tri-band Wi-Fi 7 mesh set; check that the listed frequency bands suit your needs.

Product name: tri-band, 2.4/5/6 GHz and Wi-Fi 7 (802.11be).

View at Joybuy
ASUS ZenWiFi BD4, dual-band Wi-Fi 7

ASUS ZenWiFi BD4

Worth considering if you’re looking for a ZenWiFi mesh set with wired backhaul support.

Product name: dual-band, 2.4/5 GHz and Wi-Fi 7 (802.11be).

View at Joybuy
TP-Link AX1800 mesh Wi-Fi system, Wi-Fi 6, 2-pack

TP-Link AX1800 Mesh Wi-Fi 6 System, 2-Pack

An option if you’re looking for a two-unit mesh Wi-Fi set to cover multiple rooms.

Product name: Wi-Fi 6, 2-pack.

View at Joybuy
TP-Link Deco M4, 3-pack, dual-band Wi-Fi 5

TP-Link Deco M4 3-Pack

An option if you want to place several mesh points; check how each point will connect to the rest of the network.

Product name: dual-band, 2.4/5 GHz and Wi-Fi 5 (802.11ac).

View at Joybuy

Frequently asked questions

Do I need to put a Wi-Fi point in both rooms straight away?

Not necessarily. A wireless point also needs to get a good signal from the previous point. If the signal is weak at the back of the house, the Consumers’ Association recommends trying a position between the router and that room. Then test the loft separately and add another point if needed.

How can I tell whether the problem is with Wi-Fi or my internet connection?

First, test using a computer connected to your home network with an Ethernet cable. If that connection is repeatedly much slower than the speed you were promised, look into your broadband package or contact your provider before buying extra Wi-Fi points.

What should I check after installation?

Check the connection in each room you want to cover and make sure the points are well positioned. Keep your equipment up to date and secure your network with a strong password. The Consumers’ Association also recommends setting up a guest network where useful.

What are my rights if a mesh set bought online isn’t suitable or develops a fault?

Online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to legal exceptions; ACM ConsuWijzer explains how this period works. You also have statutory rights: under the applicable rules, the retailer must resolve the issue if a product doesn’t perform as you could reasonably expect with normal use. In the Netherlands, these rights don’t have a fixed duration of just two years.

What product rules apply to a Wi-Fi router in the Netherlands?

Wi-Fi routers must meet the applicable European requirements for equipment. The Dutch Authority for Digital Infrastructure says the equipment must carry the correct CE marking; a product listing doesn’t prove that the item you receive has the marking or that it’s correct.