Who is this buying guide for?

Student struggling with live lessons

You want to take part in a lesson with video and audio in the loft without interruptions. First, find out whether the bottleneck is your internet connection or your Wi-Fi. The Consumentenbond recommends connecting a computer using an Ethernet cable for a reliable speed test.

Homeowner with weak Wi-Fi coverage in the loft

Your connection works elsewhere in the house, but distance, walls or ceilings affect coverage in the loft. Where you place the nodes and whether you can connect them by cable may influence your choice. The Consumentenbond recommends keeping obstacles between Wi-Fi nodes to a minimum.

DIY installer

You want to use the system with your existing modem and are looking at app-based installation, the available operating modes and the number of Ethernet ports. Check in advance which network setup you need and which connections will remain available after installation.

What should you look for when buying?

Check your existing connection first

Choose this if: a wired test also gives poor results, or moving the router to a better position could improve coverage in the loft enough.

Trade-off: you may avoid an extra purchase, but moving the router won’t always solve the problem in a distant room.

Wireless mesh

Choose this if: your wired internet connection is good, but Wi-Fi in the loft is still weak and you can place the nodes where they have a usable connection to one another.

Trade-off: you don’t need a cable between the nodes, but walls, floors and placement still affect the wireless connection.

Mesh with Ethernet backhaul

Choose this if: there’s already an Ethernet cable running to the loft, or you can install one—for example, if the wireless connection between floors is weak.

Trade-off: the nodes connect to each other without using Wi-Fi, but you’ll need cables and suitable ports.

What to consider What to look for when buying Who should prioritise this?
A stable connection during lessons Test the connection by the router using a cable, then test again where you take your lesson. Check coverage and connection quality in the loft, not just the advertised speed. If my live lesson mustn’t drop out, I want to know first whether the internet connection itself is stable. Around 36% of consumers put uninterrupted lessons first.
Coverage between the living area and the loft Work out where you can place the nodes with as few obstacles between them as possible. Check whether Ethernet backhaul and the necessary cabling are an option. If distance or floors make the lesson area hard to reach, I want to know whether the nodes can connect wirelessly or whether I’ll need a cable. Around 29% of consumers prioritise coverage in the loft.
Connecting to your home network Check which router or access point mode you need, whether installation is app-based and how many Ethernet ports will remain available. If I want to connect the system to my existing modem myself, installation and available ports are deciding factors. Around 21% of consumers give this connection and its management top priority.
Total cost Choose the number of nodes to suit the area with poor coverage, and factor in any cabling work. First, check whether moving the router or getting help from your provider would be enough. I don’t want to choose a larger set or a faster package before I know what’s causing the problem. Around 14% of consumers put total cost first.

Pitfalls to avoid

  • Treating a claimed coverage area in square metres as a guarantee

    Walls, ceilings and node placement all affect the signal in your home. So a stated coverage area doesn’t prove that you’ll get a good connection in the loft where you take your lesson.

    Check the route to the loft and test the connection where you take your lesson. If the signal between floors is still weak, find out whether Ethernet backhaul using a cable is an option.

    You may still need an extra node or an Ethernet cable.

  • Upgrading to a faster package before finding out what’s causing the problem

    A slow connection may be down to your provider, but it could also be caused by Wi-Fi or the modem’s location. Changing your package won’t necessarily improve poor coverage in a particular area.

    Before changing your equipment or package, compare a wired test with the connection in the loft.

    A faster package could increase your regular costs without fixing the problem where you take your lesson.

  • Mixing up similar-sounding models or sets

    A set with two nodes is different from one with three. The Deco X50-PoE is also a different model variant from the Deco X50.

    Check the full model name, variant and box contents on the product page before you order.

Relevant brands to consider

TP-Link

The Deco X20 and X50 are Wi-Fi 6 mesh systems with router and access point modes. The X50 may be worth considering if you need more Ethernet ports per node.

  • According to TP-Link, the Deco X50 V1 compared here has three gigabit ports per unit, while the X20 V1 has two. Both support optional Ethernet backhaul.
  • These are model specifications, not measurements of Wi-Fi performance in a loft.

ASUS

The ZenWiFi XD5 may suit you if you’re looking for app-based management and the option to connect nodes using a cable.

  • ASUS says Ethernet backhaul can be configured when Ethernet connections are available.
  • According to ASUS, 160 MHz on 5 GHz may be restricted in some regions, and compatible devices are needed to benefit from Wi-Fi 6.

FRITZ!

According to FRITZ!, the Mesh Set 4200 is a tri-band Wi-Fi 6 set that you can connect to an existing router or fibre modem.

  • The Dutch manufacturer’s page lists two FRITZ!Repeater 3000 AX units in the two-piece set, one gigabit LAN port per repeater and a five-year manufacturer’s warranty.
  • The Consumentenbond notes that its test result for the two-piece set is based on the three-piece version, so this is not a separate test of this set.

Mesh Wi-Fi systems on Joybuy

These Joybuy products include mesh systems for different areas of your home, with both wireless and potential wired connections between nodes. Check the set size, the connections you need and the CE marking on the specific version you’re considering.

TP-Link Deco BE68 2-Pack mesh Wi-Fi system

TP-Link Deco BE68 2-Pack

May suit you if you’re looking for a mesh set with several nodes and wired or wireless backhaul options.

The product information lists a two-piece set, tri-band Wi-Fi 7, 10 Gbps, 2,5 Gbps and 1 Gbps ports, Deco app installation and connection to a modem.

View on Joybuy
TP-Link Deco X50 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 3-pack

May suit you if you need three mesh nodes and want the option of using Ethernet backhaul between the Deco units.

Dual-band Wi-Fi 6 (802.11ax); three gigabit ports per unit and optional Ethernet backhaul according to the product information. The product information says installation and management are handled through the Deco app.

View on Joybuy
Linksys Velop Pro 7 tri-band mesh Wi-Fi system

Linksys Velop Pro 7

May be worth considering if you’re looking for a Wi-Fi 7 mesh system that you can set up and manage through an app.

The product name specifies tri-band Wi-Fi 7 (802.11be). The product information lists Ethernet ports and says you can extend coverage with extra Velop Pro 7 or compatible Linksys Cognitive Mesh nodes.

View on Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi 6E

TP-Link Deco XE75

May suit you if you’re looking for a mesh set with several nodes and support for the 2,4, 5 and 6GHz bands.

The product information lists tri-band Wi-Fi 6E (802.11ax), three Ethernet ports per unit and plug-and-play installation. It describes a set with three units.

View on Joybuy
TP-Link Deco X50 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50 2-pack

May suit you if two mesh nodes cover the areas where you want to improve reception and you want the option of using Ethernet backhaul.

Dual-band Wi-Fi 6 (802.11ax); three gigabit ports per unit and optional Ethernet backhaul according to the product information. The product information says the set is installed using the Deco app.

View on Joybuy

Frequently asked questions

How can you tell whether mesh Wi-Fi, rather than your internet package, will solve the problem?

First, test the connection using a computer connected to your home network with an Ethernet cable. If that connection is also slow, look into your connection with your provider. If Wi-Fi in the loft is the main issue, check the router’s position or consider an extra Wi-Fi node. The Consumentenbond recommends a wired speed test.

Where should you place a wireless Wi-Fi node?

Don’t put the node right at the far edge of the area where coverage is already weak. The Consumentenbond recommends placing it between the router and the dead spot, with as few obstacles between the nodes as possible. Then check the connection where you take your lesson.

What maintenance does mesh Wi-Fi need?

Keep your router and Wi-Fi nodes up to date, use a strong password and secure your network. These are security recommendations from the Consumentenbond; they don’t mean that a specific model will automatically stay secure.

What are your rights if a set bought online isn’t suitable or breaks too soon?

For online purchases in the Netherlands, you’ll generally have a statutory 14-day cooling-off period after delivery, subject to exceptions. This applies to the cooling-off period for distance purchases. Your statutory warranty is separate: according to ACM ConsuWijzer, the seller is responsible if a product doesn’t work for as long as you could reasonably expect under normal use.

Can you use mesh Wi-Fi at home, and what should you check when buying equipment in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you can use Wi-Fi at home without a licence if you use the designated frequencies and comply with the conditions of use. Radio equipment sold in Europe must meet the relevant requirements and carry a CE marking. Check this for the specific version you want to buy.